genEquipRfuStatusAutoDelayCalStatus
MWRM-RADIO-MIB ·
.1.3.6.1.4.1.2281.10.5.1.1.12
Object
column
Enumeration
IF combining parameter - the automatic delay calibration status. Supported only for specific RFUs.
Context
- MIB
- MWRM-RADIO-MIB
- OID
.1.3.6.1.4.1.2281.10.5.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- genEquipRfuStatusEntry
- Table
- genEquipRfuStatusTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | no-action |
3 | pass |
4 | error |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genEquipRfuStatusId This value indicates an index of a specific RFU | column | MWRM-UNIT-MIBRfuId | .1.3.6.1.4.1.2281.10.5.1.1.1 |
| genEquipRfuStatusRxLevelDiversity IF combining parameter - The Rx Diversity level (dBm) | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.10 |
| genEquipRfuStatusRxLevelCombined IF combining parameter - The Rx Combined level (dBm) | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.11 |
| genEquipRfuStatusRFUSerialNumber RFU Serial number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.5.1.1.13 |
| genEquipRfuStatusRFUPartNumber RFU Part number. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.5.1.1.14 |
| genEquipRfuStatusRFUmateCarrier The returned value indicates the slot number of the 'copartner RFU-D carrier'.
The returned value will be '-1' when the RFU is not RFU-D, or if the
'copartner RFU-D' carrier is no… | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.15 |
| genEquipRfuStatusRFUMaxTxFreq The maximum Tx frequency of the RFU that is allowed by the RFU. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.16 |
| genEquipRfuStatusRFUMinTxFreq The minimum Tx frequency of the RFU that is allowed by the RFU. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.17 |
| genEquipRfuStatusRFUMaxRxFreq The maximum Rx frequency of the RFU that is allowed by the RFU. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.18 |
| genEquipRfuStatusRFUMinRxFreq The minimum Rx frequency of the RFU that is allowed by the RFU. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.19 |
| genEquipRfuStatusRxLevel This value indicates the RFU Receive Level Status. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.2 |
| genEquipRfuStatusInstallation Returns 'all-indoor' or 'split' according to the RFU installation. | column | Enumeration | .1.3.6.1.4.1.2281.10.5.1.1.20 |
| genEquipRfuStatusDataSciErrors Data Sci Errors | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.21 |
| genEquipRfuStatusDeviceError Status Device Error | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.22 |
| genEquipRfuStatusBand The Band of the RF-Module in GHz | column | Enumeration | .1.3.6.1.4.1.2281.10.5.1.1.23 |
| genEquipRfuStatusPATemp The measured temperature in celsius of the PA (Power Amplifier) of the RF module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.24 |
| genEquipRfuStatusTxMute The mute status, whether it is on (mute) or off (un-mute) of the RF-Module | column | MWRM-UNIT-MIBOffOn | .1.3.6.1.4.1.2281.10.5.1.1.25 |
| genEquipRfuStatusMinTxLevel The minimum feasible TX signal level (TSL) in dBm of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.26 |
| genEquipRfuStatusMaxTxLevel The maximum feasible TX signal level (TSL) in dBm of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.27 |
| genEquipRfuStatusMinBW The minimum supported bandwidth in KHz of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.28 |
| genEquipRfuStatusMaxBW The maximum supported bandwidth in KHz of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.29 |
| genEquipRfuStatusTxLevel This value indicates the RFU Transmit Level Status. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.3 |
| genEquipRfuStatusCommunication The communication status between the host and the RFU | column | MWRM-UNIT-MIBDownUp | .1.3.6.1.4.1.2281.10.5.1.1.30 |
| genEquipRfuCfgATPCOverrideTimerState Returns the state of the ATPC 'override timer', whether it is regular or expired | column | Enumeration | .1.3.6.1.4.1.2281.10.5.1.1.31 |
| genEquipRfuStatusIfCombSupport Indicates if the IF-Combiner function is supported | column | MWRM-UNIT-MIBSupportedNotsupported | .1.3.6.1.4.1.2281.10.5.1.1.32 |
| genEquipRfuStatusMinRxLevel The minimum feasible RX signal level (RSL) in dBm of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.33 |
| genEquipRfuStatusMaxRxLevel The maximum feasible RX signal level (RSL) in dBm of the RF-Module | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.34 |
| genEquipRfuStatusTemperature This value indicates the RFU temperature.
The value depends on the represented measurement system.
with genEquipUnitMeasurementSystem parameter. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.4 |
| genEquipRfuStatusRunningVersion This value indicates the running SW version on the RFU. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.10.5.1.1.5 |
| genEquipRfuStatusRFUType The different types of the supported RFUs | column | Enumeration | .1.3.6.1.4.1.2281.10.5.1.1.6 |
| genEquipRfuStatusRFUGrade The grade of the RFU | column | RfuGrade | .1.3.6.1.4.1.2281.10.5.1.1.7 |
| genEquipRfuStatusTxRxFreqSeparation Tx to Rx frequency separation (MHz),
For some RFUs the user cannot set the Tx and Rx frequencies separately (one of them affects the other one's value). | column | Integer32 | .1.3.6.1.4.1.2281.10.5.1.1.8 |
| genEquipRfuStatusRFUMode IF combining parameter - The mode of the RFU | column | Enumeration | .1.3.6.1.4.1.2281.10.5.1.1.9 |