genEquipRfuCfgATPCOverrideTimerCancel
MWRM-RADIO-MIB ·
.1.3.6.1.4.1.2281.10.5.2.1.18
Object
Setting this parameter to ON will cancel the ATPC override mode. This will only be effective while in this mode i.e. the system had been transmitting at maximum power for a time longer than defined in genEquipRfuCfgATPCOverrideTxLevel and now is transmitting at the default level defined in genEquipRfuCfgATPCOverrideTxLevel. Following execution, the system will go back to normal ATPC operating mode
Context
- MIB
- MWRM-RADIO-MIB
- OID
.1.3.6.1.4.1.2281.10.5.2.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- genEquipRfuCfgEntry
- Table
- genEquipRfuCfgTable
- Siblings
- 17
Syntax
MWRM-UNIT-MIBOffOn
- Source
- MWRM-UNIT-MIBOffOn
- Base type
Enumeration
Values & Constraints
Object Constraints
range: 0-5
Type Values
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genEquipRfuCfgId This value indicates an index of a specific RFU | column | MWRM-UNIT-MIBRfuId | .1.3.6.1.4.1.2281.10.5.2.1.1 |
| genEquipRfuCfgLoopback RFU RF loopback command | column | Enumeration | .1.3.6.1.4.1.2281.10.5.2.1.10 |
| genEquipRfuCfgLogAdmin RFU internal log file admin
Possible values:
- enable(2)
- disable(3) | column | MWRM-UNIT-MIBEnableDisable | .1.3.6.1.4.1.2281.10.5.2.1.11 |
| genEquipRfuCfgClearComDeviceError Clear Com device Error. | column | MWRM-UNIT-MIBOffOn | .1.3.6.1.4.1.2281.10.5.2.1.12 |
| genEquipRfuCfgGreenModeAdmin Enables/disables RFU green mode.
This mode will minimize power consumption while ensuring the highest transmission power
possible to get an RSL not higher than defined in the refe… | column | MWRM-UNIT-MIBEnableDisable | .1.3.6.1.4.1.2281.10.5.2.1.13 |
| genEquipRfuCfgGreenModeReferenceLevel RSL reference level (in dB) for green mode operation | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.14 |
| genEquipRfuCfgATPCOverrideTxLevel This parameter configures the default transmission signal level in case of ATPC override due to expiration
of maximum power timer as defined in genEquipRfuCfgATPCOverrideTimeout. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.15 |
| genEquipRfuCfgATPCOverrideTimeout This parameter configures the timer to be counted while in ATPC in case of maximum power transmission.
If this timer expires, the system will transmit at a default level defined i… | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.16 |
| genEquipRfuCfgATPCOverrideTimerCounter This parameter shows the time left in the timer defined by genEquipRfuCfgATPCOverrideTxLevel | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.17 |
| genEquipRfuCfgMaxTxLevel This value indicates the RFU Maximum Transmit Level Configuration. | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.2 |
| genEquipRfuCfgTxFreq Tx Frequency configuration (Mhz) | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.3 |
| genEquipRfuCfgRxFreq Rx Frequency configuration (Mhz) | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.4 |
| genEquipRfuCfgATPCAdmin ATPC configuration - Admin mode
Possible values:
- enable(2)
- disable(3) | column | MWRM-UNIT-MIBEnableDisable | .1.3.6.1.4.1.2281.10.5.2.1.5 |
| genEquipRfuCfgATPCRefRSL ATPC configuration - reference RSL level (dBm) | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.6 |
| genEquipRfuCfgMuteTx The required TX mute status of the RF-Module | column | MuteOnOff | .1.3.6.1.4.1.2281.10.5.2.1.7 |
| genEquipRfuCfgRSLConnSrc IF combining - RFU RSL (Received Signal Level) connector source | column | Enumeration | .1.3.6.1.4.1.2281.10.5.2.1.8 |
| genEquipRfuCfgDelayCal IF combining - Delay calibration | column | Integer32 | .1.3.6.1.4.1.2281.10.5.2.1.9 |