mplsTunnelResourceTable
MPLS-TE-STD-MIB ·
.1.3.6.1.2.1.10.166.3.2.6
Object
table
The mplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources.
Context
- MIB
- MPLS-TE-STD-MIB
- OID
.1.3.6.1.2.1.10.166.3.2.6- Type
- table
- Status
- current
- Parent
- mplsTeObjects
- Siblings
- 10
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelIndexNext This object contains an unused value for
mplsTunnelIndex, or a zero to indicate
that none exist. Negative values are not allowed,
as they do not correspond to valid val… | scalar | Unsigned32 | .1.3.6.1.2.1.10.166.3.2.1 |
| mplsTunnelCRLDPResTable The mplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these att… | table | - | .1.3.6.1.2.1.10.166.3.2.10 |
| mplsTunnelNotificationEnable If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.2.1.10.166.3.2.11 |
| mplsTunnelTable The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point t… | table | - | .1.3.6.1.2.1.10.166.3.2.2 |
| mplsTunnelHopListIndexNext This object contains an appropriate value to be used
for mplsTunnelHopListIndex when creating entries in
the mplsTunnelHopTable. If the number of
unassigned entries is exhausted,… | scalar | MPLS-TC-STD-MIBMplsPathIndexOrZero | .1.3.6.1.2.1.10.166.3.2.3 |
| mplsTunnelHopTable The mplsTunnelHopTable is used to indicate the hops,
strict or loose, for an instance of an MPLS tunnel
defined in mplsTunnelTable, when it is established
via signalling, for the … | table | - | .1.3.6.1.2.1.10.166.3.2.4 |
| mplsTunnelResourceIndexNext This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is… | scalar | Unsigned32 | .1.3.6.1.2.1.10.166.3.2.5 |
| mplsTunnelARHopTable The mplsTunnelARHopTable is used to indicate the
hops for an MPLS tunnel defined in mplsTunnelTable,
as reported by the MPLS signalling protocol. Thus at
a transit LSR, this table… | table | - | .1.3.6.1.2.1.10.166.3.2.7 |
| mplsTunnelCHopTable The mplsTunnelCHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as computed by a constraint-
based routing protocol, based on… | table | - | .1.3.6.1.2.1.10.166.3.2.8 |
| mplsTunnelPerfTable This table provides per-tunnel instance MPLS
performance information. | table | - | .1.3.6.1.2.1.10.166.3.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelResourceEntry An entry in this table represents a set of resources
for an MPLS tunnel. An entry can be created by a
network administrator or by an SNMP agent as
instructed by any … | row | - | .1.3.6.1.2.1.10.166.3.2.6.1 |