mplsTunnelPathInUse

MPLS-TE-STD-MIB · .1.3.6.1.2.1.10.166.3.2.2.1.21
MIB view Table view

Object

column r/w MPLS-TC-STD-MIBMplsPathIndexOrZero 
This value denotes the configured path that was
chosen for this tunnel. This value reflects the
secondary index into mplsTunnelHopTable. This path
may not exactly match the one in
mplsTunnelARHopTable due to the fact that some CSPF
modification may have taken place. See
mplsTunnelARHopTable for the actual path being
taken by the tunnel. A value of zero denotes that
no path is currently in use or available.

Context

MIB
MPLS-TE-STD-MIB
OID
.1.3.6.1.2.1.10.166.3.2.2.1.21
Type
column
Access
readwrite
Status
current
Parent
mplsTunnelEntry
Table
mplsTunnelTable
Siblings
36

Syntax

MPLS-TC-STD-MIBMplsPathIndexOrZero
Source
MPLS-TC-STD-MIBMplsPathIndexOrZero
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsTunnelIndex
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelInde…
columnMPLS-TC-STD-MIBMplsTunnelIndex.1.3.6.1.2.1.10.166.3.2.2.1.1
mplsTunnelRole
This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to trans…
columnEnumeration.1.3.6.1.2.1.10.166.3.2.2.1.10
mplsTunnelXCPointer
This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of z…
columnSNMPv2-TCRowPointer.1.3.6.1.2.1.10.166.3.2.2.1.11
mplsTunnelSignallingProto
The signalling protocol, if any, used to setup this tunnel.
columnEnumeration.1.3.6.1.2.1.10.166.3.2.2.1.12
mplsTunnelSetupPrio
Indicates the setup priority of this tunnel.
columnInteger32.1.3.6.1.2.1.10.166.3.2.2.1.13
mplsTunnelHoldingPrio
Indicates the holding priority for this tunnel.
columnInteger32.1.3.6.1.2.1.10.166.3.2.2.1.14
mplsTunnelSessionAttributes
This bit mask indicates optional session values for this tunnel. The following describes these bit fields: fastRerouteThis flag indicates that the any tunnel hop ma…
columnBits.1.3.6.1.2.1.10.166.3.2.2.1.15
mplsTunnelLocalProtectInUse
Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.3.2.2.1.16
mplsTunnelResourcePointer
This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the mplsTunnelResourceEntry to indicate which mplsT…
columnSNMPv2-TCRowPointer.1.3.6.1.2.1.10.166.3.2.2.1.17
mplsTunnelPrimaryInstance
Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be found in the descrip…
columnMPLS-TC-STD-MIBMplsTunnelInstanceIndex.1.3.6.1.2.1.10.166.3.2.2.1.18
mplsTunnelInstancePriority
This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a se…
columnSNMPv2-SMIUnsigned32.1.3.6.1.2.1.10.166.3.2.2.1.19
mplsTunnelInstance
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the purposes of backup …
columnMPLS-TC-STD-MIBMplsTunnelInstanceIndex.1.3.6.1.2.1.10.166.3.2.2.1.2
mplsTunnelHopTableIndex
Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunnel.
columnMPLS-TC-STD-MIBMplsPathIndexOrZero.1.3.6.1.2.1.10.166.3.2.2.1.20
mplsTunnelARHopTableIndex
Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actual hops becomes available.
columnMPLS-TC-STD-MIBMplsPathIndexOrZero.1.3.6.1.2.1.10.166.3.2.2.1.22
mplsTunnelCHopTableIndex
Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when computed hops become available o…
columnMPLS-TC-STD-MIBMplsPathIndexOrZero.1.3.6.1.2.1.10.166.3.2.2.1.23
mplsTunnelIncludeAnyAffinity
A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common.
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.2.1.10.166.3.2.2.1.24
mplsTunnelIncludeAllAffinity
A link satisfies the include-all constraint if and only if the link contains all of the administrative groups specified in the constraint.
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.2.1.10.166.3.2.2.1.25
mplsTunnelExcludeAnyAffinity
A link satisfies the exclude-any constraint if and only if the link contains none of the administrative groups specified in the constraint.
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.2.1.10.166.3.2.2.1.26
mplsTunnelTotalUpTime
This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
columnSNMPv2-SMITimeTicks.1.3.6.1.2.1.10.166.3.2.2.1.27
mplsTunnelInstanceUpTime
This value identifies the total time that this tunnel instance's operStatus has been Up(1).
columnSNMPv2-SMITimeTicks.1.3.6.1.2.1.10.166.3.2.2.1.28
mplsTunnelPrimaryUpTime
Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mplsTunnelPrimaryInstance.
columnSNMPv2-SMITimeTicks.1.3.6.1.2.1.10.166.3.2.2.1.29
mplsTunnelIngressLSRId
Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender Addre…
columnMPLS-TC-STD-MIBMplsExtendedTunnelId.1.3.6.1.2.1.10.166.3.2.2.1.3
mplsTunnelPathChanges
Specifies the number of times the actual path for this tunnel instance has changed.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.10.166.3.2.2.1.30
mplsTunnelLastPathChange
Specifies the time since the last change to the actual path for this tunnel instance.
columnSNMPv2-SMITimeTicks.1.3.6.1.2.1.10.166.3.2.2.1.31
mplsTunnelCreationTime
Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of mplsTunnelOperStatus was first set to up(1).
columnSNMPv2-TCTimeStamp.1.3.6.1.2.1.10.166.3.2.2.1.32
mplsTunnelStateTransitions
Specifies the number of times the state (mplsTunnelOperStatus) of this tunnel instance has changed.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.10.166.3.2.2.1.33
mplsTunnelAdminStatus
Indicates the desired operational status of this tunnel.
columnEnumeration.1.3.6.1.2.1.10.166.3.2.2.1.34
mplsTunnelOperStatus
Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
columnEnumeration.1.3.6.1.2.1.10.166.3.2.2.1.35
mplsTunnelRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent ex…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.166.3.2.2.1.36
mplsTunnelStorageType
The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.2.1.10.166.3.2.2.1.37
mplsTunnelEgressLSRId
Identity of the egress LSR associated with this tunnel instance.
columnMPLS-TC-STD-MIBMplsExtendedTunnelId.1.3.6.1.2.1.10.166.3.2.2.1.4
mplsTunnelName
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the ifName of the interfa…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.2.1.10.166.3.2.2.1.5
mplsTunnelDescr
A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signaled by MPLS signali…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.2.1.10.166.3.2.2.1.6
mplsTunnelIsIf
Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interfac…
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.3.2.2.1.7
mplsTunnelIfIndex
If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.2.1.10.166.3.2.2.1.8
mplsTunnelOwner
Denotes the entity that created and is responsible for managing this tunnel. This column is automatically filled by the agent on creation of a row.
columnMPLS-TC-STD-MIBMplsOwner.1.3.6.1.2.1.10.166.3.2.2.1.9