mplsOutSegmentTable
MPLS-LSR-MIB ·
.1.3.6.1.3.96.1.6
Object
table
This table contains a representation of the outgoing segments from an LSR.
Context
- MIB
- MPLS-LSR-MIB
- OID
.1.3.6.1.3.96.1.6- Type
- table
- Status
- current
- Parent
- mplsLsrObjects
- Siblings
- 14
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsInterfaceConfTable This table specifies per-interface MPLS capability
and associated information. | table | - | .1.3.6.1.3.96.1.1 |
| mplsMaxLabelStackDepth The maximum stack depth supported by this LSR. | scalar | Integer32 | .1.3.6.1.3.96.1.10 |
| mplsLabelStackIndexNext This object contains an appropriate value to be used
for mplsLabelStackIndex when creating entries in the
mplsLabelStackTable. The value 0 indicates that no
unassigned entries ar… | scalar | Integer32 | .1.3.6.1.3.96.1.11 |
| mplsLabelStackTable This table specifies the label stack to be pushed
onto a packet, beneath the top label. Entries into
this table are referred to from mplsXCTable. | table | - | .1.3.6.1.3.96.1.12 |
| mplsTrafficParamIndexNext This object contains an appropriate value which will
be used for mplsTrafficParamIndex when creating
entries in the mplsTrafficParamTable. The value 0
indicates that no unassigne… | scalar | Integer32 | .1.3.6.1.3.96.1.13 |
| mplsTrafficParamTable This table specifies the Traffic Parameter objects
for in and out-segments. | table | - | .1.3.6.1.3.96.1.14 |
| mplsXCTrapEnable If this object is true, then it enables the
generation of mplsXCUp and mplsXCDown traps,
otherwise these traps are not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.3.96.1.15 |
| mplsInterfacePerfTable This table provides MPLS performance information on
a per-interface basis. | table | - | .1.3.6.1.3.96.1.2 |
| mplsInSegmentTable This table contains a collection of incoming
segments to an LSR. | table | - | .1.3.6.1.3.96.1.3 |
| mplsInSegmentPerfTable This table contains statistical information for
incoming MPLS segments to an LSR. | table | - | .1.3.6.1.3.96.1.4 |
| mplsOutSegmentIndexNext This object contains the next appropriate value to
be used for mplsOutSegmentIndex when creating
entries in the mplsOutSegmentTable. If the number
of unassigned entries is exhaus… | scalar | Integer32 | .1.3.6.1.3.96.1.5 |
| mplsOutSegmentPerfTable This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface. | table | - | .1.3.6.1.3.96.1.7 |
| mplsXCIndexNext This object contains an appropriate value to be used
for mplsXCIndex when creating entries in the
mplsXCTable. The value 0 indicates that no
unassigned entries are available. To… | scalar | Integer32 | .1.3.6.1.3.96.1.8 |
| mplsXCTable This table specifies information for switching
between LSP segments. It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections. mplsLabelStackTable spe… | table | - | .1.3.6.1.3.96.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOutSegmentEntry An entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The object mplsOutSeg… | row | - | .1.3.6.1.3.96.1.6.1 |