mplsOutSegmentIndexNext
MPLS-LSR-MIB ·
.1.3.6.1.3.96.1.5
Object
scalar
Integer32
This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Context
- MIB
- MPLS-LSR-MIB
- OID
.1.3.6.1.3.96.1.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- mplsLsrObjects
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsInterfaceConfTable This table specifies per-interface MPLS capability
and associated information. | table | - | .1.3.6.1.3.96.1.1 |
| mplsMaxLabelStackDepth The maximum stack depth supported by this LSR. | scalar | Integer32 | .1.3.6.1.3.96.1.10 |
| mplsLabelStackIndexNext This object contains an appropriate value to be used
for mplsLabelStackIndex when creating entries in the
mplsLabelStackTable. The value 0 indicates that no
unassigned entries ar… | scalar | Integer32 | .1.3.6.1.3.96.1.11 |
| mplsLabelStackTable This table specifies the label stack to be pushed
onto a packet, beneath the top label. Entries into
this table are referred to from mplsXCTable. | table | - | .1.3.6.1.3.96.1.12 |
| mplsTrafficParamIndexNext This object contains an appropriate value which will
be used for mplsTrafficParamIndex when creating
entries in the mplsTrafficParamTable. The value 0
indicates that no unassigne… | scalar | Integer32 | .1.3.6.1.3.96.1.13 |
| mplsTrafficParamTable This table specifies the Traffic Parameter objects
for in and out-segments. | table | - | .1.3.6.1.3.96.1.14 |
| mplsXCTrapEnable If this object is true, then it enables the
generation of mplsXCUp and mplsXCDown traps,
otherwise these traps are not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.3.96.1.15 |
| mplsInterfacePerfTable This table provides MPLS performance information on
a per-interface basis. | table | - | .1.3.6.1.3.96.1.2 |
| mplsInSegmentTable This table contains a collection of incoming
segments to an LSR. | table | - | .1.3.6.1.3.96.1.3 |
| mplsInSegmentPerfTable This table contains statistical information for
incoming MPLS segments to an LSR. | table | - | .1.3.6.1.3.96.1.4 |
| mplsOutSegmentTable This table contains a representation of the outgoing
segments from an LSR. | table | - | .1.3.6.1.3.96.1.6 |
| mplsOutSegmentPerfTable This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface. | table | - | .1.3.6.1.3.96.1.7 |
| mplsXCIndexNext This object contains an appropriate value to be used
for mplsXCIndex when creating entries in the
mplsXCTable. The value 0 indicates that no
unassigned entries are available. To… | scalar | Integer32 | .1.3.6.1.3.96.1.8 |
| mplsXCTable This table specifies information for switching
between LSP segments. It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections. mplsLabelStackTable spe… | table | - | .1.3.6.1.3.96.1.9 |