mimosaPtmpChPwrAgcMode
MIMOSA-NETWORKS-PTMP-MIB ·
.1.3.6.1.4.1.43356.2.1.2.9.3.3.1.11
Object
column
Enumeration
Describes the setting for Automatic Gain Control (AGC) feature, which is used to set the signal level below which the radio ignores incoming RF interference. The choices are Off or Manual
Context
- MIB
- MIMOSA-NETWORKS-PTMP-MIB
- OID
.1.3.6.1.4.1.43356.2.1.2.9.3.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mimosaPtmpChannelPowerEntry
- Table
- mimosaPtmpChannelPowerTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | manual |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mimosaPtmpChPwrRadioIndex Describes the index of the radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.1 |
| mimosaPtmpChPwrTxPowerCur Describes the current transmit power level. The allowed options
are determined by a combination of country and chosen frequency.
Measured in dBm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.10 |
| mimosaPtmpChPwrMinRxPower Describes the Rx power level (in manual AGC Mode) below your
expected signal, but above other interference, measured in dBm | column | Integer32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.12 |
| mimosaPtmpChPwrRadioName Describes the name of the radio. | column | OctetString | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.2 |
| mimosaPtmpChPwrCntrFreqCfg Describes the configured center frequency of the channel used on the
access point. The center frequency represents the absolute center
of the selected channel width without any of… | column | MIMOSA-MIB-TCMimosa5GHzFrequency | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.3 |
| mimosaPtmpChPwrPrimChannelCfg Describes the primary channel number that corresponds with the
operating frequency. | column | MIMOSA-MIB-TCMimosa5GHzChannelNumber | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.4 |
| mimosaPtmpChPwrChWidthCfg Describes the channel width for access point operation: 20 MHz,
40 MHz or 80 MHz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.5 |
| mimosaPtmpChPwrTxPowerCfg Describes the desired transmit power level. The allowed options
are determined by a combination of country and chosen frequency.
Measured in dBm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.6 |
| mimosaPtmpChPwrCntrFreqCur Describes the current center frequency of the channel used on the
access point. The center frequency represents the absolute center
of the selected channel width without any offse… | column | MIMOSA-MIB-TCMimosa5GHzFrequency | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.7 |
| mimosaPtmpChPwrPrimChannelCur Describes the current primary channel number that corresponds with the
operating frequency. | column | MIMOSA-MIB-TCMimosa5GHzChannelNumber | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.8 |
| mimosaPtmpChPwrChWidthCur Describes the current channel width for access point operation: 20 MHz,
40 MHz or 80 MHz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.43356.2.1.2.9.3.3.1.9 |