mesMiscAdminStatus
LUM-MES-MIB ·
.1.3.6.1.4.1.8708.2.32.2.10.1.1.5
Object
The administrative state for the object.
down - The object is de-activated. For a CU-less
system, admin status cannot be set to 'up' or
'service' if mgmt VLAN IP address or netmask is not
configured.
service - The object is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be set to 'up' again.
up - The object will be activated when
available. Alarms are not suppressed.
Note: If 'System/Equipment/Management VLAN' is set
to off, management VLAN will be deactivated even if
'Misc/Administrative status' is up.
(only for gbeMxp10GFEC, msMxp10G, fhmxp10g, gbe10Emxp10G and
gbe22Emxp10G) See 'Management VLAN enabled in node'
for status.
Context
- MIB
- LUM-MES-MIB
- OID
.1.3.6.1.4.1.8708.2.32.2.10.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Default
down- Parent
- mesMiscEntry
- Groups
- 12
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MES-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MES-MIB::mesMiscAdminStatus'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-MES-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MES-MIB::mesMiscAdminStatus.<mesMiscIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-MES-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-MES-MIB::mesMiscAdminStatus'
Syntax
- Source
- LUM-TCBoardOrInterfaceAdminStatus
- Base type
Enumeration
Type Description
The administrative state for a board or
interface.
down - The board/interface should be inactive.
service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-configuration. When service is
concluded adminStatus should be set to 'up'
again.
up - The board/interface should be activated when
it becomes available. Alarms are not suppressed.
Values & Constraints
Type Values
1 | down |
2 | service |
3 | up |