powerState
LSI-MegaRAID-SAS-MIB ·
.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.30
Object
column
optional
Integer32
Power condition of the device. Values are device is active(0),device is stopped(1),device is transitioning between power states(255)
Context
- MIB
- LSI-MegaRAID-SAS-MIB
- OID
.1.3.6.1.4.1.3582.4.1.4.2.1.2.1.30- Type
- column
- Access
- readonly
- Status
- optional
- Parent
- physicalDriveEntry
- Table
- physicalDriveTable
- Siblings
- 47
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdIndex optional The unique ID | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.1 |
| pdState optional Firmware's interpretation of drive state.
Values: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64),UNCON… | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.10 |
| disabledForRemoval optional If true, drive is ready for removal. Values: false(0),true(1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.11 |
| linkSpeed optional Negotiated link speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.12 |
| pdSupportFlags optional 1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.13 |
| sasAddr optional Device SAS addresses. Comma separeted for multiple address | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.14 |
| rawSize optional Size(MB) before COD and coercion | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.15 |
| nonCoercedSize optional Size(MB) after COD is reserved but before coercion | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.16 |
| coercedSize optional Size(MB) after COD is reserved and after coercion | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.17 |
| enclDeviceId optional Enclosure's device Id (in decimal); if device is not within enclosure value is -1 | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.18 |
| enclIndex optional Firmware internal enclosure index | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.19 |
| physDevID optional The Device ID | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.2 |
| slotNumber optional Slot number of this drive, if the Physical Disk is part of an enclosure then -1 | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.20 |
| operationProgress optional Operation progress in %. e.g. Rebuild progress is 10% | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.21 |
| adpID-PDT optional Controller id where this Physical Drive is attached | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.22 |
| operationSupport optional MakeOnline,MakeOffline,MakeFailed,MakeBad,MakeUncofigured,
MakeSpare,RemoveSpare,replaceMissing,markMissing,startRebuild,
stopRebuild,locate,pdclear,foreignImportNotAllowed,Foreig… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.23 |
| pdVendorID optional Vendor ID | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.24 |
| pdProductID optional Product ID | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.25 |
| pdFwversion optional PD firmware version | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.26 |
| diskType optional Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.27 |
| partnerDevId optional If drive is in an enclosure with dual paths,This is Partner Device ID.
In all other cases INVALID(-1) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.28 |
| mediatype optional Media Type HDD(0),SSD(1),Solid state flash module(2) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.29 |
| oemSupported optional Is the drive supported by the OEM (OEM-specific checks). Values: notSupported(1), supported(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.3 |
| secured optional 1=drive is secured, 0=not secured | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.31 |
| locked optional 1=drive is locked, 0=unlocked | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.32 |
| foreign optional 1=drive is secured by a foreign lock key, 0=drive is not secured by a foreign lock key | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.33 |
| oemCertified optional Is the drive certified by the OEM (OEM-specific checks). Values: notCertified(1), Certified(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.34 |
| foreignImportNotAllowed optional 1=Drive is not allowed foreignImport operation, 0=Drive is allowed foreignImport operation | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.35 |
| pdTemperature optional Physical Drive temperature in Celsius | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.36 |
| pdSerialNumber optional Physical Drives serial number | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.37 |
| piEligible optional Protection Information eligibility.1=drive can be used for PD Enabled LD , 0=drive can't be used for PD Enabled LD | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.38 |
| piType optional SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS PI Type 5(5) ,Reserv… | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.39 |
| scsiDevType optional Type of this Device.
Values: disk(0),tape(1),printer(2),processor(3),cdrom(5),scanner(6),optical(7),enclosure(13),dvd(10),unknown(31) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.4 |
| piFormatted optional formatted for PI information. 1=drive is formatted for PI information, 0=no PI data. | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.40 |
| userDataBlockSize optional Number of bytes of user data in LBA | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.41 |
| commissionedSpare optional Yes = this PD is a commissioned spare, No = this PD is not a commissioned spare. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.42 |
| emergencySpare optional Eligible = this PD is a emergency spare, Ineligible = this PD is not a emergency spare. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.43 |
| shieldCounter optional How many times the shield diagnostics was run before it was marked failed | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.44 |
| shieldDiagCompletionTime optional Last successful Diagnostics completion time. 0 is N/A | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.45 |
| ineligibleForSSCD optional Whether PD cannot be used for an SSCD. PD can not be used for an SSCD(1), PD can be used for an SSCD(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.46 |
| ineligibleForLd optional Whether PD cannot be used for a regular LD. PD can not be used for a regular LD(1), PD can be used for a regular LD(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.47 |
| serviceable optional Whether PD is removeable for service. PD is removeable for service(1), PD is not removeable for service(0) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.48 |
| connectedAdapterPort optional Adapter port(s) to which the device is connected. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.5 |
| deviceSpeed optional Maximum supported speed. Values: speed-unknown(0),speed-1p5G(1),speed-3G(2),speed-6G(3) | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.6 |
| mediaErrCount optional Error count of the device | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.7 |
| otherErrCount optional Other error count of the device | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.8 |
| predFailCount optional Predictive fail count of the device | column | Integer32 | .1.3.6.1.4.1.3582.4.1.4.2.1.2.1.9 |