lgpCondId6229RemoteSensorSystemAverageLowHumidity
LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB ·
.1.3.6.1.4.1.476.1.42.3.2.7.1.6229
Object
node
The average humidity of multiple remote sensors on interconnected cooling units in a single system has dropped below a lower threshold. The event is deactivated when the humidity rises above the threshold.
Context
- MIB
- LIEBERT-GP-FLEXIBLE-CONDITIONS-MIB
- OID
.1.3.6.1.4.1.476.1.42.3.2.7.1.6229- Type
- node
- Status
- current
- Parent
- lgpFlexConditionsWellKnown
- Siblings
- 1279
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lgpCondId4122SystemInputPowerProblem The input is not qualified to provide power to the system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4122 |
| lgpCondId4132BypassOverloadPhaseA An overload exists on output phase A while operating on the bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4132 |
| lgpCondId4133BypassOverloadPhaseB An overload exists on output phase B while operating on the bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4133 |
| lgpCondId4134BypassOverloadPhaseC An overload exists on output phase C while operating on the bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4134 |
| lgpCondId4135BypassNotAvailable A problem associated with the bypass has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4135 |
| lgpCondId4137BypassAutoRetransferPrimed Automatic retransfer from bypass to inverter is possible. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4137 |
| lgpCondId4138BypassAutoRetransferFailed After performing a recoverable transfer to bypass, an attempt to
auto retransfer from bypass to inverter failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4138 |
| lgpCondId4139BypassExcessAutoRetransfers The number of auto retransfers, from bypass to inverter, has
exceeded the maximum for a specified time interval. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4139 |
| lgpCondId4140BypassRestartInhibitExternal Restart of the bypass is inhibited by the state of an external
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4140 |
| lgpCondId4141BypassBreakerClosed The bypass breaker is closed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4141 |
| lgpCondId4142BypassStaticSwitchOverload Bypass off due to static switch overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4142 |
| lgpCondId4143BypassStaticSwitchUnavailable The static bypass is unavailable to support the critical load. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4143 |
| lgpCondId4144BypassExcessivePulseParallel The system has performed too many pulse parallel operations within
a specified time interval. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4144 |
| lgpCondId4145BypassAutoTransferFailed An automatic transfer to static bypass failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4145 |
| lgpCondId4146SystemInputPhsRotationError The power conductors on the input line are not wired to the UPS in
the sequence preferred for the rectifier (A-B-C). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4146 |
| lgpCondId4147SystemInputCurrentLimit The RMS input current has reached the input current limit
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4147 |
| lgpCondId4162BatteryLow The calculated battery time remaining has reached the low battery
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4162 |
| lgpCondId4163OutputOffEndofDischarge Output turned off due to battery reaching end-of-discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4163 |
| lgpCondId4164BatteryChargingError The battery is not charging properly. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4164 |
| lgpCondId4165BatteryChargingReducedExtrnl Using a reduced battery charging algorithm due to an external
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4165 |
| lgpCondId4166BatteryCapacityLow Battery capacity is low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4166 |
| lgpCondId4167OutputOff Output is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4167 |
| lgpCondId4168BatteryDischarging The battery is discharging. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4168 |
| lgpCondId4169BatteryTemperatureImbalance Excessive temperature differences between battery sensors detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4169 |
| lgpCondId4170BatteryEqualize The rectifier output voltage is increased to equalize the battery
voltage level. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4170 |
| lgpCondId4171BatteryManualTestInProgress Manual battery test is in progress. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4171 |
| lgpCondId4172BatteryAutoTestInProgress Automatic battery test is in progress. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4172 |
| lgpCondId4173MainBatteryDisconnectOpen Main battery disconnect is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4173 |
| lgpCondId4174BatteryTemperatureSensorFault A battery temperature sensor fault has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4174 |
| lgpCondId4175BypassFrequencyError The bypass frequency is outside the inverter synchronization
limits. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4175 |
| lgpCondId4176BatteryCircuitBreaker1Open Battery circuit breaker 1 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4176 |
| lgpCondId4177BatteryBreaker1OpenFailure Battery circuit breaker 1 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4177 |
| lgpCondId4178BatteryBreaker1CloseFailure Battery circuit breaker 1 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4178 |
| lgpCondId4179BatteryCircuitBreaker2Open Battery circuit breaker 2 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4179 |
| lgpCondId4180BatteryBreaker2OpenFailure Battery circuit breaker 2 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4180 |
| lgpCondId4181BatteryBreaker2CloseFailure Battery circuit breaker 2 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4181 |
| lgpCondId4182BatteryCircuitBreaker3Open Battery circuit breaker 3 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4182 |
| lgpCondId4183BatteryBreaker3OpenFailure Battery circuit breaker 3 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4183 |
| lgpCondId4184BatteryBreaker3CloseFailure Battery circuit breaker 3 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4184 |
| lgpCondId4185BatteryCircuitBreaker4Open Battery circuit breaker 4 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4185 |
| lgpCondId4186BatteryBreaker4OpenFailure Battery circuit breaker 4 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4186 |
| lgpCondId4187BatteryBreaker4CloseFailure Battery circuit breaker 4 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4187 |
| lgpCondId4188BatteryCircuitBreaker5Open Battery circuit breaker 5 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4188 |
| lgpCondId4189BatteryBreaker5OpenFailure Battery circuit breaker 5 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4189 |
| lgpCondId4190BatteryBreaker5CloseFailure Battery circuit breaker 5 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4190 |
| lgpCondId4191BatteryCircuitBreaker6Open Battery circuit breaker 6 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4191 |
| lgpCondId4192BatteryBreaker6OpenFailure Battery circuit breaker 6 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4192 |
| lgpCondId4193BatteryBreaker6CloseFailure Battery circuit breaker 6 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4193 |
| lgpCondId4194BatteryCircuitBreaker7Open Battery circuit breaker 7 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4194 |
| lgpCondId4195BatteryBreaker7OpenFailure Battery circuit breaker 7 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4195 |
| lgpCondId4196BatteryBreaker7CloseFailure Battery circuit breaker 7 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4196 |
| lgpCondId4197BatteryCircuitBreaker8Open Battery circuit breaker 8 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4197 |
| lgpCondId4198BatteryBreaker8OpenFailure Battery circuit breaker 8 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4198 |
| lgpCondId4199BatteryBreaker8CloseFailure Battery circuit breaker 8 failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4199 |
| lgpCondId4200BatteryChargingInhibited Battery charging is inhibited due to an external inhibit signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4200 |
| lgpCondId4213SystemShutdownEPO System shutdown due to Emergency Power Off (EPO). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4213 |
| lgpCondId4214SystemShutdownREPO System shutdown due to Remote Emergency Power Off (REPO). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4214 |
| lgpCondId4215SystemOutputOff The system output is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4215 |
| lgpCondId4216BypassBackfeedDetected The system detected a voltage on the bypass when none was expected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4216 |
| lgpCondId4217BypassManualXfrInhibited Manual transfer from inverter to bypass is inhibited - bypass not
qualified. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4217 |
| lgpCondId4218BypassManualRexfrInhibited Manual transfer from bypass to inverter is inhibited - inverter
output not qualified. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4218 |
| lgpCondId4219BatteryOverTemperature A battery temperature sensor is reporting a value above a
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4219 |
| lgpCondId4220BatteryExternalMonitor1 External battery monitor 1 - battery maintenance required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4220 |
| lgpCondId4221BatteryExternalMonitor2 External battery monitor 2 - battery maintenance required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4221 |
| lgpCondId4222BatteryGroundFault Battery system ground fault amperage exceeds the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4222 |
| lgpCondId4229EmergencyPowerOffLatched System output is off - 'Emergency Power Off (EPO) - latched'
requires manual reset. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4229 |
| lgpCondId4230SystemOutputLowPowerFactor The system output power factor is low, resulting in reduced output
capacity. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4230 |
| lgpCondId4231OutputCurrentExceedsThreshold Output current for one or more phases exceeds a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4231 |
| lgpCondId4233InverterFailure Inverter failure - inverter output is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4233 |
| lgpCondId4234InverterOverloadPhaseA Inverter is operating with an overload on phase A. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4234 |
| lgpCondId4235InverterOverloadPhaseB Inverter is operating with an overload on phase B. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4235 |
| lgpCondId4236InverterOverloadPhaseC Inverter is operating with an overload on phase C. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4236 |
| lgpCondId4237InverterInhibitExternal Restart of the inverter is inhibited by an external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4237 |
| lgpCondId4238InverterOutBreakerOpenFail Inverter output breaker failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4238 |
| lgpCondId4239InverterOutBreakerCloseFail Inverter output breaker failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4239 |
| lgpCondId4270InputContact01 The external input contact 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4270 |
| lgpCondId4271InputContact02 The external input contact 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4271 |
| lgpCondId4272InputContact03 The external input contact 3. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4272 |
| lgpCondId4273InputContact04 The external input contact 4. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4273 |
| lgpCondId4274InputContact05 The external input contact 5. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4274 |
| lgpCondId4275InputContact06 The external input contact 6. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4275 |
| lgpCondId4276InputContact07 The external input contact 7. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4276 |
| lgpCondId4277InputContact08 The external input contact 8. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4277 |
| lgpCondId4278InputContact09 The external input contact 9. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4278 |
| lgpCondId4279InputContact10 The external input contact 10. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4279 |
| lgpCondId4280InputContact11 The external input contact 11. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4280 |
| lgpCondId4281InputContact12 The external input contact 12. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4281 |
| lgpCondId4282InputContact13 The external input contact 13. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4282 |
| lgpCondId4283InputContact14 The external input contact 14. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4283 |
| lgpCondId4284InputContact15 The external input contact 15. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4284 |
| lgpCondId4285InputContact16 The external input contact 16. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4285 |
| lgpCondId4286OutputAmpOverUserLimitPhsA The phase A output has exceeded the user amperage threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4286 |
| lgpCondId4287OutputAmpOverUserLimitPhsB The phase B output has exceeded the user amperage threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4287 |
| lgpCondId4288OutputAmpOverUserLimitPhsC The phase C output has exceeded the user amperage threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4288 |
| lgpCondId4289InverterTransferInhibitExt Transfer of critical bus source to inverter is inhibited by an
external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4289 |
| lgpCondId4290InverterShutdownOverload The inverter has shutdown due to a sustained overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4290 |
| lgpCondId4294InletAirOverTemperature The inlet air exceeds the maximum temperature threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4294 |
| lgpCondId4295RectifierFailure Rectifier failure - rectifier is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4295 |
| lgpCondId4296RectifierOperationInhibitExt The operation of the rectifier is inhibited by an external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4296 |
| lgpCondId4297UPSOutputonInverter The output power is supplied by the inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4297 |
| lgpCondId4298UPSOutputonBypass The output power is supplied by the bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4298 |
| lgpCondId4299OutputLoadonMaintBypass The output power is supplied by the maintenance bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4299 |
| lgpCondId4300InternalCommunicationsFailure The control has detected a communication failure of a component on
the internal communication bus. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4300 |
| lgpCondId4308DCBusGroundFaultPositive A ground fault has been detected on the positive DC Bus link. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4308 |
| lgpCondId4309DCBusGroundFaultNegative A ground fault has been detected on the negative DC Bus link. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4309 |
| lgpCondId4310EquipmentOverTemperature Equipment over temperature summary event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4310 |
| lgpCondId4311SystemFanFailure System fan failure - one or more fans have failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4311 |
| lgpCondId4313PasswordChanged Password changed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4313 |
| lgpCondId4314PowerSupplyFailure Power supply failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4314 |
| lgpCondId4315OnGenerator A generator is supplying the power to the system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4315 |
| lgpCondId4316AutoRestartInProgress Auto restart is in progress. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4316 |
| lgpCondId4317AutoRestartInhibitedExt Auto restart inhibited due to an external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4317 |
| lgpCondId4320InitiatedTransfertoBypass User initiated manual transfer to bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4320 |
| lgpCondId4321InitiatedTransfertoInverter User initiated manual transfer to inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4321 |
| lgpCondId4322BatteryTestPassed Battery test passed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4322 |
| lgpCondId4323BatteryTestFailed Battery test failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4323 |
| lgpCondId4324BatteryTestManuallyStopped The battery test was manually stopped prior to completion. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4324 |
| lgpCondId4325BackfeedBreakerOpen The backfeed breaker is in the open position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4325 |
| lgpCondId4341VelocityAuthenticationFailure Notification of a message rejected by Velocity due to an
authentication failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4341 |
| lgpCondId4360ReceptacleOverCurrent The system has detected a receptacle over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4360 |
| lgpCondId4361ReceptacleUnderCurrent The system has detected a receptacle under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4361 |
| lgpCondId4382SystemInputCurrentImbalance System Input Currents are Imbalanced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4382 |
| lgpCondId4383BypassStaticSwitchOffExtrnl Bypass static switch is off due to the state of an external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4383 |
| lgpCondId4384BatteryEoDDisconnect Battery disconnect due to end-of-discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4384 |
| lgpCondId4389SystemOutputFault A fault has been detected in the system output. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4389 |
| lgpCondId4390InverterOffExternal Inverter is off (operation is inhibited) due to external signal
state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4390 |
| lgpCondId4391InverterStaticSwitchSCRShort The system has detected a short across one or more inverter static
switch Silicon Controlled Rectifiers (SCR). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4391 |
| lgpCondId4392TemperatureSensorError One or more temperature sensors cannot provide a valid temperature
reading (i.e. sensor failure, wiring failure, sense circuit
failure, etc). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4392 |
| lgpCondId4406BranchOverCurrent The system has detected a module over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4406 |
| lgpCondId4407BranchUnderCurrent The system has detected a module under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4407 |
| lgpCondId4416BranchOverCurrent The system has detected a module over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4416 |
| lgpCondId4417BranchUnderCurrent The system has detected a module under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4417 |
| lgpCondId4421BranchFailure One or more conditions indicate a Branch Receptacle Module failure
, service is required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4421 |
| lgpCondId4436PDUOverCurrent The system has detected a module over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4436 |
| lgpCondId4437PDUUnderCurrent The system has detected a module under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4437 |
| lgpCondId4438SystemInternalTemperatureRise Excessive temperature rise internal to the system (i.e. difference
between the output versus input temperature is too large). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4438 |
| lgpCondId4439AutomaticRestartFailed Automatic restart failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4439 |
| lgpCondId4440FuseFailure A summary event indicating one or more fuse failures. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4440 |
| lgpCondId4441SystemControllerError System controller internal error. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4441 |
| lgpCondId4442SystemBreakersOpenFailure One or more breakers in the system failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4442 |
| lgpCondId4448PDUOverCurrent The system has detected a module over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4448 |
| lgpCondId4449PDUUnderCurrent The system has detected a module under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4449 |
| lgpCondId4468PDUOverCurrentL1 The system has detected a module over current condition on line 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4468 |
| lgpCondId4469PDUOverCurrentL2 The system has detected a module over current condition on line 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4469 |
| lgpCondId4470PDUOverCurrentL3 The system has detected a module over current condition on line 3. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4470 |
| lgpCondId4471PDUUnderCurrentL1 The system has detected a module under current condition on line 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4471 |
| lgpCondId4472PDUUnderCurrentL2 The system has detected a module under current condition on line 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4472 |
| lgpCondId4473PDUUnderCurrentL3 The system has detected a module under current condition on line 3. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4473 |
| lgpCondId4492ReceptaclePowerStateOn The receptacle power state changed to the ON state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4492 |
| lgpCondId4493ReceptaclePowerStateOff The receptacle power state changed to the OFF state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4493 |
| lgpCondId4494BranchBreakerOpen The Branch Receptacle Module's input breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4494 |
| lgpCondId4495DeviceConfigurationChange Device Configuration Change. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4495 |
| lgpCondId4496BasicDisplayModuleRemoved Basic Display Module Removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4496 |
| lgpCondId4497BasicDisplayModuleDiscovered Basic Display Module Discovered. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4497 |
| lgpCondId4500PDUOverCurrent The system has detected a power module over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4500 |
| lgpCondId4501PDUUnderCurrent The system has detected a power module under current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4501 |
| lgpCondId4502PDUFailure One or more conditions indicate a power module failure, service is
required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4502 |
| lgpCondId4503PDUCommunicationFail Internal communications failure with the Power Module. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4503 |
| lgpCondId4504BranchRemoved Branch Receptacle Module Removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4504 |
| lgpCondId4505BranchDiscovered Branch Receptacle Module Discovered. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4505 |
| lgpCondId4506BranchOverCurrent The system has detected a Branch Receptacle Module over current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4506 |
| lgpCondId4507BranchCurrent The system has detected a Branch Receptacle Module under current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4507 |
| lgpCondId4508ReceptacleLoadRemoved The receptacle's load stopped drawing power. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4508 |
| lgpCondId4509ReceptacleLoadAdded The receptacle's load started to draw power. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4509 |
| lgpCondId4523ModuleRemoved Module Removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4523 |
| lgpCondId4524ModuleAdded Module Added. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4524 |
| lgpCondId4550FirmwareUpdateRequired Module compatibility error requires a system firmware update to
resolve. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4550 |
| lgpCondId4551GenericTestEvent A generic test event designed to evaluate system handling of
events. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4551 |
| lgpCondId4580OverTemperature An over temperature condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4580 |
| lgpCondId4581UnderTemperature An under temperature condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4581 |
| lgpCondId4588OverRelativeHumidity An over relative humidity condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4588 |
| lgpCondId4589UnderRelativeHumidity An under relative humidity condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4589 |
| lgpCondId4601ExternalAirSensorAOverTemperature [Ext Air Sensor A Temperature] has exceeded [External Air Over
Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4601 |
| lgpCondId4604ExternalAirSensorBOverTemperature [Ext Air Sensor B Temperature] has exceeded [External Air Over
Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4604 |
| lgpCondId4608ExtAirSensorAUnderTemperature [Ext Air Sensor A Temperature] has dropped below [Ext Air Under
Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4608 |
| lgpCondId4611ExtAirSensorBUnderTemperature [Ext Air Sensor B Temperature] has dropped below [Ext Air Under
Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4611 |
| lgpCondId4615ExtDewPointOverTemperature At least one dew point temperature reading ([Ext Air Sensor A Dew
Point Temp], [Ext Air Sensor B Dew Point Temp]...) has exceeded
[Ext Dew Point Over Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4615 |
| lgpCondId4618ExternalAirSensorAIssue The external air sensor A is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4618 |
| lgpCondId4621ExternalAirSensorBIssue The external air sensor B is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4621 |
| lgpCondId4626SupplyChilledWaterOverTemp [Supply Fluid Temperature] has exceeded [High Supply Fluid
Temperature Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4626 |
| lgpCondId4629SupplyChilledWaterTempSensorIssue The supply chilled water temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4629 |
| lgpCondId4634SupplyRefrigerantOverTemp Event that is activated when [Supply Refrigerant Temperature]
exceeds [Supply Refrig Over Temp Threshold]. The event is
deactivated when the temperature drops below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4634 |
| lgpCondId4637SupplyRefrigerantUnderTemp [Supply Refrigerant Temperature] has dropped below a specified
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4637 |
| lgpCondId4640SupplyRefrigerantTempSensorIssue The supply refrigeramt temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4640 |
| lgpCondId4645SupplyFluidOverTemp [Supply Fluid Temperature] has exceeded [Supply Fluid Over Temp
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4645 |
| lgpCondId4648SupplyFluidUnderTemp [Supply Fluid Temperature] has dropped below a specified threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4648 |
| lgpCondId4651SupplyFluidTempSensorIssue The supply fluid temperature sensor is disconnected or the signal
is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4651 |
| lgpCondId4656Pump1LossofFlow Loss of flow is detected in pump 1. The loss of flow condition
occurs when no differential pressure is detected across the pump. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4656 |
| lgpCondId4659Pump2LossofFlow Loss of flow is detected in pump 2. The loss of flow condition
occurs when no differential pressure is detected across the pump. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4659 |
| lgpCondId4662PumpShortCycle Pumps have short cycled. A short cycle is defined as turning on
and off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4662 |
| lgpCondId4669Compressor1AHighHeadPressure Compressor 1A high head pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4669 |
| lgpCondId4672Compressor1BHighHeadPressure Compressor 1B high head pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4672 |
| lgpCondId4675Compressor2AHighHeadPressure Compressor 2A high head pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4675 |
| lgpCondId4678Compressor2BHighHeadPressure Compressor 2B high head pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4678 |
| lgpCondId4681Compressor1AShortCycle Compressor 1A short cycle. A short cycle is defined as turning on
and off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4681 |
| lgpCondId4684Compressor1BShortCycle Compressor 1B short cycle. A short cycle is defined as turning on
and off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4684 |
| lgpCondId4687Compressor2AShortCycle Compressor 2A short cycle. A short cycle is defined as turning on
and off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4687 |
| lgpCondId4690Compressor2BShortCycle Compressor 2B short cycle. A short cycle is defined as turning on
and off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4690 |
| lgpCondId4693Tandem1LowSuctionPressure 'Tandem compressors' 1 low suction pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4693 |
| lgpCondId4696Tandem2LowSuctionPressure 'Tandem compressors' 2 low suction pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4696 |
| lgpCondId4703ChilledWaterControlValvePosition Chilled water valve out of position. Chilled water control valve
position does not match expected value. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4703 |
| lgpCondId4711SystemCondensationDetected System condensation detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4711 |
| lgpCondId4714ShutdownLossOfPower System lost power. This event becomes active when the unit is
powered on following an unexpected loss of power. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4714 |
| lgpCondId4720SmokeDetected Smoke detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4720 |
| lgpCondId4723WaterUnderFloor Water under the floor is detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4723 |
| lgpCondId4726ServiceRequired Unit requires servicing. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4726 |
| lgpCondId4729FanIssue One or more fans are not operating within their operational
parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4729 |
| lgpCondId4732ReceptacleLoadDropped The receptacle's load is not drawing power. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4732 |
| lgpCondId4740BatteryAutomaticTestInhibited Automatic (scheduled) battery tests are inhibited. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4740 |
| lgpCondId4741BatterySelfTest Battery self test is in progress. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4741 |
| lgpCondId4742BatteryLowShutdown Battery disconnect due to end-of-discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4742 |
| lgpCondId4747EquipmentTemperatureSensorFail One or more temperature sensors report a temperature outside of
the range of expected operation. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4747 |
| lgpCondId4749SystemFanFailureRedundant Redundant system fan failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4749 |
| lgpCondId4750MultipleFanFailure Multiple fan failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4750 |
| lgpCondId4753MainControllerFault A Main Controller fault has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4753 |
| lgpCondId4754SystemBreakersCloseFailure One or more breakers in the system failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4754 |
| lgpCondId4755InputFilterCycleLock The input filter disconnect is open due to exceeding the maximum
number of cycles. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4755 |
| lgpCondId4756ServiceCodeActive Service code is running. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4756 |
| lgpCondId4757LBSActive The Load Bus Sync option is active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4757 |
| lgpCondId4758LBSInhibited The system has detected that conditions to perform Load Bus Sync
are not satisfied. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4758 |
| lgpCondId4759LeadingPowerFactor The leading output Power Factor has fallen below a specified value. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4759 |
| lgpCondId4760ControlsResetRequired A controls reset is required due to one or more critical settings
changing. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4760 |
| lgpCondId4823ParallelCommWarning Parallel communication bus warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4823 |
| lgpCondId4824SystemCommFail Failure of a device on the multi-module system communication bus. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4824 |
| lgpCondId4825LossofRedundancy The multi-module collection doesn't have enough modules to satisfy
the redundancy configuration. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4825 |
| lgpCondId4826BPSSStartupInhibit The Bypass Static Switch startup is inhibited. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4826 |
| lgpCondId4827MMSTransferInhibit The critical load can not be manually transferred from inverter to
bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4827 |
| lgpCondId4828MMSRetransferInhibit The critical load can not be manually retransferred from bypass to
inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4828 |
| lgpCondId4830MMSLossofSyncPulse Multi-module system loss of sync pulse. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4830 |
| lgpCondId4831MMSOverload Multi-module system overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4831 |
| lgpCondId4834MMSOnBattery The multi-module system is on battery. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4834 |
| lgpCondId4835MMSLowBatteryWarning Multi-module system low battery warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4835 |
| lgpCondId4906LowAmbientTemperature The system has detected a low ambient temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4906 |
| lgpCondId4907HighAmbientTemperature The system has detected a high ambient temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4907 |
| lgpCondId4908LowOverallVoltage The system has detected a low battery string overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4908 |
| lgpCondId4909HighOverallVoltage The system has detected a high battery string overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4909 |
| lgpCondId4910HighBatteryStringCurrent The system has detected a high battery string current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4910 |
| lgpCondId4911LowBatteryStringFloatCurrent The system has detected a low battery string float current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4911 |
| lgpCondId4912HighBatteryStringFloatCurrent The system has detected a high battery string float current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4912 |
| lgpCondId4913HighBatteryStringRippleCurrent The system has detected a high battery string ripple current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4913 |
| lgpCondId4914BatteryStringDischargeDetected The system has detected a battery string discharge condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4914 |
| lgpCondId4915MaximumDischargeTimeExceeded The system has detected an excessive discharge time condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4915 |
| lgpCondId4916DischargeLowOverallVoltage The system has detected a low battery string overall voltage
condition during a discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4916 |
| lgpCondId4917DischargeLowCellVoltage The system has detected a low cell voltage condition during a
discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4917 |
| lgpCondId4918DischargeHighBatteryStringCurrent The system has detected a high battery string current condition
during a discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4918 |
| lgpCondId4919ExcessiveCelltoCellTemperatureDeviation The system has detected an excessive cell to cell temperature
deviation condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4919 |
| lgpCondId4920ExcessiveCelltoAmbientTemperatureDeviation The system has detected an excessive cell to ambient temperature
deviation condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4920 |
| lgpCondId4964LowCellVoltage The system has detected a low cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4964 |
| lgpCondId4965HighCellVoltage The system has detected a high cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4965 |
| lgpCondId4966LowCellTemperature The system has detected a low cell temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4966 |
| lgpCondId4967HighCellTemperature The system has detected a high cell temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4967 |
| lgpCondId4968LowInternalResistance The system has detected a low internal resistance condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4968 |
| lgpCondId4969HighInternalResistance The system has detected a high internal resistance condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4969 |
| lgpCondId4970HighIntercellResistance The system has detected a high intercell resistance condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4970 |
| lgpCondId4978IntertierResistanceHigh The system has detected a high intertier resistance condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4978 |
| lgpCondId4980SupplyChilledWaterLossofFlow Supply chilled water or glycol flow is too low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4980 |
| lgpCondId4983SupplyRefrigOverTempBand1 [Supply Refrigerant Temperature] is above the upper threshold
specified by [Supply Refrig Temp Band 1]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4983 |
| lgpCondId4986SupplyRefrigUnderTempBand1 [Supply Refrigerant Temperature] is below the lower threshold
specified by [Supply Refrig Temp Band 1]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4986 |
| lgpCondId4990SupplyRefrigOverTempBand2 [Supply Refrigerant Temperature] is above the upper threshold
specified by [Supply Refrig Temp Band 2]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4990 |
| lgpCondId4993SupplyRefrigUnderTempBand2 [Supply Refrigerant Temperature] is below the lower threshold
specified by [Supply Refrig Temp Band 2]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4993 |
| lgpCondId4996Inverter1ShortCycle Inverter for pump 1 has short cycled and is temporarily locked out
from further operation to protect from thermal overload. A short
cycle is defined as powering on and off a numbe… | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4996 |
| lgpCondId4999Inverter2ShortCycle Inverter for pump 2 has short cycled and is temporarily locked out
from further operation to protect from thermal overload. A short
cycle is defined as powering on and off a numbe… | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.4999 |
| lgpCondId5015SupplyAirOverTemperature [Supply Air Temperature] has exceeded [High Supply Air Temperature
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5015 |
| lgpCondId5019SupplyAirUnderTemperature [Supply Air Temperature] has dropped below [Low Supply Air
Temperature Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5019 |
| lgpCondId5023ReturnAirOverTemperature [Return Air Temperature] has exceeded [High Return Air Temperature
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5023 |
| lgpCondId5026SupplyAirSensorIssue The air sensor at the outlet of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5026 |
| lgpCondId5034HighReturnHumidity [Return Humidity] has exceeded [High Return Humidity Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5034 |
| lgpCondId5036LowReturnHumidity [Return Humidity] has dropped below [Low Return Humidity
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5036 |
| lgpCondId5037HumidifierHoursExceeded Operating hours for the humidifier have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5037 |
| lgpCondId5038DehumidifierHoursExceeded Operating hours for the dehumidifier have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5038 |
| lgpCondId5039HumidifierUnderCurrent The electrical current to the humidifier has dropped below its
lower threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5039 |
| lgpCondId5040HumidifierOverCurrent The electrical current to the humidifier has exceeded its upper
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5040 |
| lgpCondId5041HumidifierLowWater The water level in the humidifier has dropped below its threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5041 |
| lgpCondId5042HumidifierCylinderWorn Humidifier cylinder is not operating properly and needs to be
replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5042 |
| lgpCondId5043HumidifierIssue Humidifier issue detected, causing it to be locked out. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5043 |
| lgpCondId5044ExtHumidifierLockout The humidifier is shut down and disabled by an external input
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5044 |
| lgpCondId5045HumidifierControlBoardNotDetected Humidifier control board is required to be connected, but no
signal is detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5045 |
| lgpCondId5046ReturnHumidityOutOfProportionalBand [Return Humidity] has exceeded the upper limit of
[Dehumidification Proportional Band], or has dropped below the
lower limit of [Humidification Proportional Band] ], for an
extend… | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5046 |
| lgpCondId5053LossofAirFlow No air flow through the unit due to failure of all fans. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5053 |
| lgpCondId5054FanHoursExceeded Operating hours for the unit blower fan have exceeded the
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5054 |
| lgpCondId5055TopFanIssue The top fan is not operating within its normal parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5055 |
| lgpCondId5056BottomFanIssue The bottom fan is not operating within its normal parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5056 |
| lgpCondId5060RemoteSensorIssue Remote sensor is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5060 |
| lgpCondId5062Compressor1LowSuctionPressure Compressor 1 low suction pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5062 |
| lgpCondId5063Compressor1HoursExceeded Operating hours for compressor 1 have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5063 |
| lgpCondId5064DigScrollComp1TempSensorIssue Digital scroll compressor 1 temperature sensor is disconnected or
the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5064 |
| lgpCondId5065DigScrollComp1OverTemp Digital scroll compressor 1 shut off because its head temperature
has exceeded the upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5065 |
| lgpCondId5066Compressor1LowPressureTransducerIssue Compressor 1 low pressure transducer is disconnected or the signal
is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5066 |
| lgpCondId5067ExtCompressorLockout The compressor is shut down and disabled by an external input
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5067 |
| lgpCondId5068ReheaterOverTemperature The temperature of the reheater has exceeded its threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5068 |
| lgpCondId5069ElectricReheater1HoursExceeded Operating hours for electric reheater 1 have exceeded the
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5069 |
| lgpCondId5070ExtReheatLockout The reheater is shut down and disabled by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5070 |
| lgpCondId5071Condenser1Issue Condenser 1 is not operating within its normal parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5071 |
| lgpCondId5072CondenserVFDIssue The condenser fan Variable Frequency Drive is offline. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5072 |
| lgpCondId5073CondenserTVSSIssue The condenser Transient Voltage Surge Suppressor or Surge
Protection Device has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5073 |
| lgpCondId5104ExtOverTemperature A temperature has exceeded its threshold, as indicated by an
external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5104 |
| lgpCondId5105ExtLossofFlow Loss of flow is detected, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5105 |
| lgpCondId5106ExtCondenserPumpHighWater High water is detected in the condensate pump by the auxiliary
float, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5106 |
| lgpCondId5107ExtStandbyGlycolPumpOn The standby glycol pump is on, as indicated by an external input
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5107 |
| lgpCondId5108ExternalFireDetected Fire detected, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5108 |
| lgpCondId5109UnitOn Unit was turned on. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5109 |
| lgpCondId5110UnitOff Unit was turned off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5110 |
| lgpCondId5111UnitStandby Unit was placed in standby mode. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5111 |
| lgpCondId5112UnitPartialShutdown An event has occurred requiring some system components to be
shutdown and disabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5112 |
| lgpCondId5113UnitShutdown An event has occurred requiring the unit to be shutdown and
disabled to prevent damage to the system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5113 |
| lgpCondId5114WaterLeakageDetectorSensorIssue The water leakage detector sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5114 |
| lgpCondId5115BMSCommunicationsTimeout Building Management System (or external monitoring system) has not
communicated with the system within the expected timeframe. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5115 |
| lgpCondId5116MaintenanceDue The calculated maintenance date has been reached. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5116 |
| lgpCondId5117MaintenanceCompleted Maintenance has been completed on the unit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5117 |
| lgpCondId5118CloggedAirFilter Air filter is dirty and needs to be (cleaned or) replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5118 |
| lgpCondId5119RAMBatteryIssue RAM or RAM backup battery is not operating correctly. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5119 |
| lgpCondId5120MasterUnitCommunicationLost Communication with master unit has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5120 |
| lgpCondId5121HighPowerShutdown Supply to high power components has been shutdown. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5121 |
| lgpCondId5126DigScrollComp2OverTemp Digital scroll compressor 2 shut off because its head temperature
has exceeded the upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5126 |
| lgpCondId5144OutputOfUf The output frequency has exceeded a specified range for a
specified period of time. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5144 |
| lgpCondId5145MMSModuleAlarmActive Active alarm or fault of any module in a multi-module system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5145 |
| lgpCondId5146CompressorPumpDownIssue Unable to pump down suction-side pressure during compressor
shutdown. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5146 |
| lgpCondId5147ReturnAirSensorIssue The air sensor at the inlet of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5147 |
| lgpCondId5148CompressorHighPressureTransducerIssue Compressor high pressure transducer is disconnected or the signal
is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5148 |
| lgpCondId5149BatteryNotQualified The UPS battery voltage is not qualified. This event will be
detected even in the absence of battery disconnect or when it is
open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5149 |
| lgpCondId5150BatteryTerminalsReversed The measured battery voltage is a negative value due to reverse
battery terminal connections. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5150 |
| lgpCondId5151BatteryConverterFailure Battery converter failure. This is a summary event caused by one
or more power sub-modules in a UPS module. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5151 |
| lgpCondId5152InverterSCROpen The system has detected an open across one or more inverter static
switch Silicon Controlled Rectifiers. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5152 |
| lgpCondId5153LoadSharingFault Difference between any phase inverter current of unit and the
relevant average output current of parallel system is more than a
specific percent of nominal current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5153 |
| lgpCondId5154DCBusAbnormal The system has detected an abnormal DC Bus Voltage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5154 |
| lgpCondId5155MainsInputNeutralLost Loss of neutral in the input source is detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5155 |
| lgpCondId5156LoadImpactTransfer On bypass as result of load impact. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5156 |
| lgpCondId5157UserOperationInvalid User attempted an invalid operation. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5157 |
| lgpCondId5158PowerSubModuleFault One or more failures detected in power module, inverter or
rectifier. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5158 |
| lgpCondId5178OutputOvervoltage One or more of the output phase voltages has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5178 |
| lgpCondId5179OutputUndervoltage One or more of the output phase voltages has dropped below the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5179 |
| lgpCondId5180OutputOvercurrent One or more of the phase currents has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5180 |
| lgpCondId5181NeutralOvercurrent The system's neutral current has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5181 |
| lgpCondId5182GroundOvercurrent System ground current has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5182 |
| lgpCondId5183OutputVoltageTHD The Total Harmonic Distortion of the voltage on one or more of the
output phases has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5183 |
| lgpCondId5184OutputFrequencyError The output frequency is outside a specified range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5184 |
| lgpCondId5185TransformerOvertemperature Indicates a unit transformer overtemperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5185 |
| lgpCondId5212PanelSummaryStatus The status for the panel. Detects and annunciates upon occurrence
of any branch or panelboard main breaker active event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5212 |
| lgpCondId5213PanelOvervoltage One or more of the phase voltages of this panel has exceeded the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5213 |
| lgpCondId5214PanelUndervoltage One or more of the phase voltages of this panel is less than the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5214 |
| lgpCondId5215PanelOvercurrent One or more of the phase currents of this panel has exceeded the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5215 |
| lgpCondId5216PanelNeutralOvercurrent The Neutral current of this panel has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5216 |
| lgpCondId5217PanelGroundOvercurrent The Ground current of this panel has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5217 |
| lgpCondId5226BranchOvercurrent The current in one or more phases of this branch exceeds the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5226 |
| lgpCondId5227BranchUndercurrent The current in one or more phases of this branch is less than the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5227 |
| lgpCondId5245SubfeedPhaseOvercurrent One or more of the phase currents in this subfeed has exceeded the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5245 |
| lgpCondId5246SubfeedNeutralOvercurrent The Neutral current in this subfeed has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5246 |
| lgpCondId5247SubfeedGroundOvercurrent The Ground current of this subfeed has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5247 |
| lgpCondId5249EventState The present state of this digital event input. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5249 |
| lgpCondId5263CompressorNotStopping Compressor commanded to stop, but continues to run. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5263 |
| lgpCondId5269CompressorHoursExceeded [Compressor Hours] has exceeded [Compressor Hours Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5269 |
| lgpCondId5270CompressorHighHeadPressure Compressor is shut down due to high head pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5270 |
| lgpCondId5271CompressorLowSuctionPressure Compressor is shut down due to low suction pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5271 |
| lgpCondId5272CompressorThermalOverload Compressor is shut down due to thermal overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5272 |
| lgpCondId5273CompressorLowOilPressure Compressor low oil pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5273 |
| lgpCondId5274CompressorHeadPressureOverThreshold Compressor head pressure has exceeded an upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5274 |
| lgpCondId5275CompressorLossofDifferentialPressure Compressor is shut down due to low differential pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5275 |
| lgpCondId5277CondenserFanIssue Condenser fan is not operating within its operational parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5277 |
| lgpCondId5278LowCondenserRefrigerantPressure Refrigerant pressure in condenser coil is too low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5278 |
| lgpCondId5280LowFluidPressure [Fluid Pressure] has dropped below a specified threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5280 |
| lgpCondId5293ReturnFluidOverTemp [Return Fluid Temperature] has exceeded a specified threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5293 |
| lgpCondId5294ReturnFluidUnderTemp [Return Fluid Temperature] has dropped below a specified threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5294 |
| lgpCondId5295ReturnFluidTempSensorIssue The return fluid temperature sensor is disconnected or the signal
is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5295 |
| lgpCondId5296TeamworkReturnFluidTempSensorIssue The return fluid temperature sensors for all Teamwork units are
disconnected or the signals are out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5296 |
| lgpCondId5297AllPumpsLossofFlow System is shut down due to loss of flow in all available pumps. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5297 |
| lgpCondId5300PumpHoursExceeded [Pump Hours] has exceeded [Pump Hours Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5300 |
| lgpCondId5306FreeCoolingValveHoursExceeded [Free Cooling Valve Hours] has exceeded [Free Cooling Valve Hours
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5306 |
| lgpCondId5308EvaporatorInletTempSensorIssue The evaporator inlet temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5308 |
| lgpCondId5309TeamworkEvaporatorInletTempSensorIssue The evaporator inlet temperature sensors for all Teamwork units
are disconnected or the signals are out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5309 |
| lgpCondId5310EvaporatorFluidFreezeAutoReset Evaporator outlet fluid temperature has dropped below the freeze
threshold. Evaporator has been shut down, but will restart when
the temperature rises above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5310 |
| lgpCondId5311EvaporatorFluidFreezeManualResetRequired Evaporator outlet fluid temperature has dropped below the freeze
threshold. Evaporator has been shut down and requires a manual
reset. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5311 |
| lgpCondId5315SubgroupEventOccurredDuringCommunicationLoss While subgroup unit communication was lost, an event occurred on
the subgroup unit. Please check subgroup unit event log. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5315 |
| lgpCondId5335ReturnAirUnderTemperature [Return Air Temperature] has dropped below [Low Return Air
Temperature Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5335 |
| lgpCondId5349ExtAirSensorAHighHumidity [Ext Air Sensor A Humidity] has exceeded [Ext Air Sensor A High
Humidity Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5349 |
| lgpCondId5351ExtAirSensorALowHumidity [Ext Air Sensor A Humidity] has dropped below [Ext Air Sensor A
Low Humidity Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5351 |
| lgpCondId5352CompressorShortCycle Compressor short cycle. A short cycle is defined as turning on and
off a number of times over a set time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5352 |
| lgpCondId5354DigScrollCompDischargeTempSensorIssue Digital scroll compressor discharge temperature sensor is
disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5354 |
| lgpCondId5355DigScrollCompOverTemp Digital scroll compressor is shut down due to head temperature
exceeding an upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5355 |
| lgpCondId5361ExtFreeCoolingLockout Free cooling is disabled by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5361 |
| lgpCondId5362FreeCoolingTempSensorIssue The free cooling fluid temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5362 |
| lgpCondId5365HotWaterHotGasValveHoursExceeded [Hot Water / Hot Gas Valve Hours] has exceeded [Hot Water / Hot
Gas Valve Hours Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5365 |
| lgpCondId5368ElectricReheaterHoursExceeded [Electric Reheater Hours] has exceeded [Electric Reheaters Hours
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5368 |
| lgpCondId5376MainFanOverload Main fan is shut down due to thermal overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5376 |
| lgpCondId5377Condenser Condenser is not operating within its operational parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5377 |
| lgpCondId5415ExtLossofAirBlower Loss of air blower is detected, as indicated by an external input
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5415 |
| lgpCondId5416ExtStandbyUnitOn Standby unit is on, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5416 |
| lgpCondId5417DigitalOutputBoardNotDetected Digital output board is required to be connected, but no signal is
detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5417 |
| lgpCondId5418UnitCodeMissing Unit code has not been entered and saved. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5418 |
| lgpCondId5419UnitCommunicationLost Master has lost communication with one or more networked units. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5419 |
| lgpCondId5422OvertemperaturePowerOff Power turned off because equipment over temperature limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5422 |
| lgpCondId5423TooManySensors The number of sensors connected to the PDU exceeds the allowable
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5423 |
| lgpCondId5432TransformerOvertemperaturePowerOff Output power shutdown due to high transformer temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5432 |
| lgpCondId5433TransformerOvertemperature Transformer temperature has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5433 |
| lgpCondId5434TransformerTemperatureSensorFail Transformer temperature sensor has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5434 |
| lgpCondId5436LowAmbientTemperatureProbeTwo The system has detected a low ambient temperature condition on
temperature probe 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5436 |
| lgpCondId5437HighAmbientTemperatureProbeTwo The system has detected a high ambient temperature condition on
temperature probe 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5437 |
| lgpCondId5438ThermalRunawayDetected The system has detected a thermal runaway condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5438 |
| lgpCondId5439BatteryStringEqualize The system has detected a battery string equalize condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5439 |
| lgpCondId5440BatteryStringOffline The system has detected the battery string is offline. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5440 |
| lgpCondId5442DischargeLowCellVoltage The system has detected a low cell voltage condition during a
discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5442 |
| lgpCondId5447MMSPowerSharing A module is not sharing power with the other modules in a multi
-module system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5447 |
| lgpCondId5453ModuleInStandbyIntelligentParalleling Module is placed into standby operation per Intelligent
Paralleling. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5453 |
| lgpCondId5456ECOModeActive Conditions for Activation or Automatic Reactivation have been
satisfied. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5456 |
| lgpCondId5457ECOModeSuspended ECO Mode session is suspended. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5457 |
| lgpCondId5458ExcessECOSuspends Number of automatic suspensions has exceeded the ECO Mode -
Maximum Auto Suspensions setting. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5458 |
| lgpCondId5471DoorOpen An open door was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5471 |
| lgpCondId5472DoorSensorDisconnected Door sensor disconnect detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5472 |
| lgpCondId5479ContactClosureOpen An open circuit was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5479 |
| lgpCondId5480ContactClosureClosed A closed circuit was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5480 |
| lgpCondId5492ExtSystemCondensationDetected External system condensation detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5492 |
| lgpCondId5495ExtFanIssue One or more fans are not operating within their operational
parameters. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5495 |
| lgpCondId5500ExtRemoteShutdown Unit is shut down by a remote signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5500 |
| lgpCondId5505HotAisleTempOutofRange The air temperature in the Hot aisle is either above [Hot Aisle
Over Temp Threshold] or below [Hot Aisle Under Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5505 |
| lgpCondId5508ColdAisleTempOutofRange The air temperature in the cold aisle is either above [Cold Aisle
Over Temp Threshold] or below [Cold Aisle Under Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5508 |
| lgpCondId5512RemoteShutdown Unit is shut down by a remote signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5512 |
| lgpCondId5513CompressorCapacityReduced Compressor capacity has been reduced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5513 |
| lgpCondId5514CompressorLowPressureTransducerIssue Compressor low pressure transducer is disconnected or the signal
is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5514 |
| lgpCondId5524PDUNeutralOverCurrent The system has detected a neutral over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5524 |
| lgpCondId5531CondenserCommunicationLost Communication with condenser unit has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5531 |
| lgpCondId5535CondenserOutsideAirTempSensorIssue Condenser outside air temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5535 |
| lgpCondId5536CondenserOutsideAirTempOutofOperatingRange [Condenser Outside Air Temperature] is either above an upper
threshold or below a lower threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5536 |
| lgpCondId5537CondenserControlBoardIssue The condenser control board is reporting an issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5537 |
| lgpCondId5539CondenserRefrigerantPressureOverThreshold Condenser refrigerant pressure has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5539 |
| lgpCondId5540CondenserRefrigerantPressureUnderThreshold Condenser refrigerant pressure has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5540 |
| lgpCondId5541CondenserRefrigerantPressureSensorIssue Condenser refrigerant pressure sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5541 |
| lgpCondId5542CondenserSupplyRefrigerantOverTemp Condenser supply refrigerant temperature has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5542 |
| lgpCondId5543CondenserSupplyRefrigerantUnderTemp Condenser supply refrigerant temperature has dropped below a
specified threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5543 |
| lgpCondId5544CondenserSupplyRefrigerantTempSensorIssue Condenser supply refrigerant temperature sensor is disconnected or
the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5544 |
| lgpCondId5545CondenserMaxFanSpeedOverride Fan speed exceeding the maximum set point in order to alleviate a
high temperature or pressure condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5545 |
| lgpCondId5559EvaporatorReturnFluidOverTemp [Evaporator Return Fluid Temperature] has exceeded a threshold.
The event is deactivated when the temperature drops below the
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5559 |
| lgpCondId5560EvaporatorReturnFluidUnderTemp [Evaporator Return Fluid Temperature] has dropped below a
threshold. The event is deactivated when the temperature rises
above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5560 |
| lgpCondId5561LBSActiveMaster This UPS system has been selected as the functional Master Load
Bus Synchronization (LBS) system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5561 |
| lgpCondId5562LBSActiveSlave This UPS system is synchronized to the output bus of the UPS
system that has been selected as the Master Load Bus
Synchronization (LBS) system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5562 |
| lgpCondId5563DCBusLowFault The DC Bus voltage has reached a critical low level. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5563 |
| lgpCondId5564FanContactorOpen The fan contactor is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5564 |
| lgpCondId5565FanContactorOpenFail The fan contactor failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5565 |
| lgpCondId5566FanContactorCloseFail The fan contactor failed to close. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5566 |
| lgpCondId5567IPInhibit The intelligent paralleling operation is inhibited. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5567 |
| lgpCondId5568InputUndervoltage One or more of the input phase voltages has dropped below the
limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5568 |
| lgpCondId5569InputOvervoltage One or more of the input phase voltages has exceeded the limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5569 |
| lgpCondId5573AmbientAirSensorIssue Ambient air sensor is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5573 |
| lgpCondId5577ExtDewPointUnderTemperature At least one dew point temperature reading ([Ext Air Sensor A Dew
Point Temp], [Ext Air Sensor B Dew Point Temp]...) has dropped
below [Ext Dew Point Under Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5577 |
| lgpCondId5578DewPointOverTemperature Dew point temperature reading has exceeded the upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5578 |
| lgpCondId5579DewPointUnderTemperature Dew point temperature reading has dropped below the lower
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5579 |
| lgpCondId5588UnspecifiedGeneralEvent One or more unspecified events active. See local unit display for
further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5588 |
| lgpCondId5593RemoteSensorAverageOverTemperature [Remote Sensor Average Temperature] has exceeded [Remote Sensor
Over Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5593 |
| lgpCondId5594RemoteSensorAverageUnderTemperature [Remote Sensor Average Temperature] has dropped below [Remote
Sensor Under Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5594 |
| lgpCondId5595RemoteSensorSystemAverageOverTemperature [Remote Sensor System Average Temperature] has exceeded [Remote
Sensor Over Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5595 |
| lgpCondId5596RemoteSensorSystemAverageUnderTemperature [Remote Sensor System Average Temperature] has dropped below
[Remote Sensor Under Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5596 |
| lgpCondId5597RemoteSensorOverTemperature [Remote Sensor Temperature] has exceeded [Remote Sensor Over Temp
Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5597 |
| lgpCondId5598RemoteSensorUnderTemperature [Remote Sensor Temperature] has dropped below [Remote Sensor Under
Temp Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5598 |
| lgpCondId5600AirEconomizerEmergencyOverride Indoor room temperature has exceeded its upper threshold and the
outdoor air damper has been opened for emergency cooling. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5600 |
| lgpCondId5601AirEconomizerReducedAirflow Air economizer filter is dirty and needs to be cleaned or replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5601 |
| lgpCondId5604CompressorSuperheatOverThreshold Compressor discharge refrigerant superheat temperature has
exceeded an upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5604 |
| lgpCondId5609ThermalRunawayCelltoAmbientTemperatureEvent The delta temperature between a cell temperature and the ambient
temperature has exceeded the thermal runaway cell to ambient
temperature threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5609 |
| lgpCondId5610ThermalRunawayCelltoCellTemperatureEvent The delta temperature between two cells has exceeded the thermal
runaway cell to cell temperature threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5610 |
| lgpCondId5611ThermalRunawayChargerCurrentLevelOneEvent The Battery-String charger current has exceeded the thermal
runaway charger current level one threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5611 |
| lgpCondId5612ThermalRunawayChargerCurrentLevelTwoEvent The Battery-String charger current has exceeded the thermal
runaway charger current level two threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5612 |
| lgpCondId5617TemperatureControlSensorIssue The air sensor selected for cooling control is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5617 |
| lgpCondId5621EEVSuperheatBelowThreshold Electronic expansion valve refrigerant low superheat event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5621 |
| lgpCondId5622EEVDischargeTempAboveThreshold Electronic expansion valve refrigerant high discharge temperature
event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5622 |
| lgpCondId5623EEVBatteryIssue Electronic expansion valve battery cannot be recharged and needs
to be replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5623 |
| lgpCondId5624EEVPowerIssue Electronic expansion valve lost power and is running on battery
backup. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5624 |
| lgpCondId5625EEVUnspecifiedGeneralEvent One or more unspecified electronic expansion valve events active.
See local unit display for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5625 |
| lgpCondId5629StaticPressureSensorIssue The static pressure sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5629 |
| lgpCondId5630HighStaticPressure High static pressure event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5630 |
| lgpCondId5631LowStaticPressure Low static pressure event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5631 |
| lgpCondId5636PumpUnspecifiedGeneralEvent One or more unspecified pump events active. See local unit display
for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5636 |
| lgpCondId5637CondenserUnitUnspecifiedGeneralEvent One or more unspecified condenser unit events active. See local
unit display for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5637 |
| lgpCondId5638CondenserCircuitUnspecifiedGeneralEvent One or more unspecified condenser circuit events active. See local
unit display for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5638 |
| lgpCondId5642SFAReservedEvent1 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5642 |
| lgpCondId5643SFAReservedEvent2 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5643 |
| lgpCondId5644SFAReservedEvent3 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5644 |
| lgpCondId5645SFAReservedEvent4 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5645 |
| lgpCondId5646SFAReservedEvent5 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5646 |
| lgpCondId5647SFAReservedEvent6 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5647 |
| lgpCondId5648SFAReservedEvent7 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5648 |
| lgpCondId5649SFAReservedEvent8 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5649 |
| lgpCondId5650SFAReservedEvent9 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5650 |
| lgpCondId5651SFAReservedEvent10 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5651 |
| lgpCondId5652SFAReservedEvent11 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5652 |
| lgpCondId5653SFAReservedEvent12 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5653 |
| lgpCondId5654SFAReservedEvent13 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5654 |
| lgpCondId5655SFAReservedEvent14 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5655 |
| lgpCondId5656SFAReservedEvent15 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5656 |
| lgpCondId5657SFAReservedEvent16 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5657 |
| lgpCondId5658SFAReservedEvent17 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5658 |
| lgpCondId5659SFAReservedEvent18 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5659 |
| lgpCondId5660SFAReservedEvent19 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5660 |
| lgpCondId5661SFAReservedEvent20 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5661 |
| lgpCondId5662SFAReservedEvent21 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5662 |
| lgpCondId5663SFAReservedEvent22 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5663 |
| lgpCondId5664SFAReservedEvent23 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5664 |
| lgpCondId5665SFAReservedEvent24 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5665 |
| lgpCondId5666SFAReservedEvent25 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5666 |
| lgpCondId5768OutletAirOvertemperatureLimit The difference between the outlet air temperature and inlet air
temperature exceeds a specified maximum temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5768 |
| lgpCondId5769EMOShutdown An Emergency Module Off command has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5769 |
| lgpCondId5770TopOutletFanFault Top outlet fan fault - one or more top outlet fans have failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5770 |
| lgpCondId5771MMSOverCapacity The multi-module system load is larger than the apparent power
limit setting. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5771 |
| lgpCondId5773CompressorCapacityNormal Compressor has returned to normal load capacity. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5773 |
| lgpCondId5774CompressorContactorIssue Compressor contactor is not closing during compressor startup or
is not opening during compressor shutdown. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5774 |
| lgpCondId5775UnitShutdownUnspecifiedGeneralEvent One or more unspecified unit shutdown events active. See local
unit display for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5775 |
| lgpCondId5776PDULowVoltageLN The system has detected a module under voltage condition (LN). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5776 |
| lgpCondId5777PDULowVoltageLL The system has detected a module under voltage condition (LL). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5777 |
| lgpCondId5778PDULowVoltageL1L2 The system has detected a line-to-line under voltage condition (L1
-L2). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5778 |
| lgpCondId5779PDULowVoltageL2L3 The system has detected a line-to-line under voltage condition (L2
-L3). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5779 |
| lgpCondId5780PDULowVoltageL3L1 The system has detected a line-to-line under voltage condition (L3
-L1). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5780 |
| lgpCondId5781PDULowVoltageL1N The system has detected a line to neutral under voltage condition
(L1-N). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5781 |
| lgpCondId5782PDULowVoltageL2N The system has detected a line to neutral under voltage condition
(L2-N). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5782 |
| lgpCondId5783PDULowVoltageL3N The system has detected a line to neutral under voltage condition
(L3-N). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5783 |
| lgpCondId5784BranchLowVoltageLN The system has detected a module under voltage condition (LN). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5784 |
| lgpCondId5785BranchLowVoltageLL The system has detected a module under voltage condition (LL). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5785 |
| lgpCondId5786BranchLowVoltage The system has detected a module under voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5786 |
| lgpCondId5788ContTieActive Continuous Power Tie Active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5788 |
| lgpCondId5792UserkWhReset The user kWh accumulator was reset to zero by the operator. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5792 |
| lgpCondId5796PeakkWReset The Peak kW was reset. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5796 |
| lgpCondId5798BypassOverload Bypass overloaded, reduce load immediately. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5798 |
| lgpCondId5801LowBatteryShutdownImminent If active and guaranteed shutdown is enabled, a low battery
reserve condition exists that will shutdown the UPS. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5801 |
| lgpCondId5806OutputOverload An overload exists on the output. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5806 |
| lgpCondId5807OutputOffPending Output off pending - shutdown imminent. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5807 |
| lgpCondId5808SystemShutdownOutputShort Shutdown was due to a short on the output. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5808 |
| lgpCondId5809SystemShutdownLowBattery Shutdown was due to a low battery condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5809 |
| lgpCondId5810SystemShutdownRemoteShutdown Shutdown was due to a remote communications shutdown command. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5810 |
| lgpCondId5811SystemShutdownHardwareFault Shutdown was due to an externally applied hardware control signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5811 |
| lgpCondId5817LossofRedundancy The system has an insufficient number of power modules to provide
redundancy. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5817 |
| lgpCondId5818PowerModuleFailure One or more conditions indicate a power module failure, service is
required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5818 |
| lgpCondId5819PowerModuleWarning One or more power modules is reporting a warning condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5819 |
| lgpCondId5838PowerModuleFanFault The Power Module has detected a fan fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5838 |
| lgpCondId5839PowerModuleOverTemperature The Power Module has detected an over temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5839 |
| lgpCondId5840PowerModuleShutdownOverTemperature Power Module has shutdown due to over temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5840 |
| lgpCondId5842ChargerModuleFanFault The Charger Module has detected a fan fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5842 |
| lgpCondId5847BatteryModuleTemperatureSensorFault A Battery Module temperature sensor fault has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5847 |
| lgpCondId5848BatteryModuleOverTemperature The Battery Module has detected an over temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5848 |
| lgpCondId5849ReplaceBatteryModule The Battery Module needs to be replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5849 |
| lgpCondId5850SystemShutdownTransformerOverTemperature System shutdown due to transformer over temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5850 |
| lgpCondId5851MaximumLoadAlarm Maximum load alarm indicating load setting has been exceeded. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5851 |
| lgpCondId5856BatteryModuleFault One or more battery modules are reporting a fault condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5856 |
| lgpCondId5857BatteryModuleWarning One or more battery modules are reporting a warning condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5857 |
| lgpCondId5862CheckAirFilter Please check air filter, it may need to be cleaned or replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5862 |
| lgpCondId5863TransformerFanFault The transformer fan has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5863 |
| lgpCondId5865NoLoadWarning Indicates the UPS has output voltage but the output current is
below a set threshold [No Load Warning Current Threshold] for a
set period of time [No Load Warning Delay]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5865 |
| lgpCondId5871BatteryOverTemperatureLimit A battery temperature sensor is reporting a value above a
predetermined limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5871 |
| lgpCondId5873UnexpectedMainBatteryDisconnectClosure The main battery disconnect has closed unexpectedly. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5873 |
| lgpCondId5874BatteryOverVoltage The system has detected that the battery voltage has exceeded a
predetermined limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5874 |
| lgpCondId5875BatteryFuseFault One or more battery fuse faults has occurred. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5875 |
| lgpCondId5878MainBatteryDisconnectForcedToUnlock The main battery disconnect is forced to the unlocked state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5878 |
| lgpCondId5879VdcBackfeed The voltage between battery and DC bus measurements is out of
tolerance. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5879 |
| lgpCondId5880RectifierConfigurationChangeRequest This event indicates that the battery is not configured and PFC is
not enabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5880 |
| lgpCondId5881RegenerationActive Regeneration operation is active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5881 |
| lgpCondId5882RegenerationOperationTerminated Regeneration operation is not active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5882 |
| lgpCondId5883RegenerationOperationFailure Regeneration operation has been terminated due to bypass source
instability or unit misoperation. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5883 |
| lgpCondId5884ProgramInputContact01 When the signal from [Program Input Contact 01] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5884 |
| lgpCondId5885ProgramInputContact02 When the signal from [Program Input Contact 02] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5885 |
| lgpCondId5886ProgramInputContact03 When the signal from [Program Input Contact 03] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5886 |
| lgpCondId5887ProgramInputContact04 When the signal from [Program Input Contact 04] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5887 |
| lgpCondId5888ProgramInputContact05 When the signal from [Program Input Contact 05] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5888 |
| lgpCondId5889ProgramInputContact06 When the signal from [Program Input Contact 06] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5889 |
| lgpCondId5890ProgramInputContact07 When the signal from [Program Input Contact 07] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5890 |
| lgpCondId5891ProgramInputContact08 When the signal from [Program Input Contact 08] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5891 |
| lgpCondId5892ProgramInputContact09 When the signal from [Program Input Contact 09] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5892 |
| lgpCondId5893ProgramInputContact10 When the signal from [Program Input Contact 10] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5893 |
| lgpCondId5894ProgramInputContact11 When the signal from [Program Input Contact 11] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5894 |
| lgpCondId5895ProgramInputContact12 When the signal from [Program Input Contact 12] is active the
function assigned to this contact is executed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5895 |
| lgpCondId5896GroundFaultDetected The system has detected a ground fault on a Battery-String. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5896 |
| lgpCondId5902ReturnHumiditySensorIssue The humidity sensor at the inlet of the unit is disconnected or
the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5902 |
| lgpCondId5903CompressorLowDifferentialPressureLockout Compressor exceeded maximum startup attempts due to low
differential pressure. Compressor is shutdown and has been
disabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5903 |
| lgpCondId5906AirflowSensorIssue Airflow sensor is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5906 |
| lgpCondId5907ExtAirDamperPositionIssue Air damper position does not match expected value, as indicated by
an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5907 |
| lgpCondId5908ExtPowerSourceAFailure Unit main power source A failure, as indicated by an external
input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5908 |
| lgpCondId5909ExtPowerSourceBFailure Unit main power source B failure, as indicated by an external
input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5909 |
| lgpCondId5910StaticPressureSensorOutofRange Static pressure sensor signal is out of its configured range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5910 |
| lgpCondId5911FluidTemperatureSensorIssue The fluid temperature sensor is disconnected or the signal is out
of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5911 |
| lgpCondId5912FluidFlowSensorIssue The fluid flow sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5912 |
| lgpCondId5914OverDifferentialPressure An over differential pressure condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5914 |
| lgpCondId5915UnderDifferentialPressure An under differential pressure condition was detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5915 |
| lgpCondId5924MixedModeLockout Mixed mode has been entered too many times over a rolling time
period and has been temporarily disabled. Mixed mode is defined
as the use of a compressor on one refrigeration cir… | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5924 |
| lgpCondId5928UnbalancedLoadCondition The system has detected a line-to-line unbalanced load condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5928 |
| lgpCondId5939BranchOverCurrentProtection The Branch Receptacle Module's over current protection is
triggered. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5939 |
| lgpCondId5948BranchLowVoltageLL The system has detected a module under voltage condition (LL). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5948 |
| lgpCondId5957BypassInputVoltageFault The system has detected the bypass voltage is unqualified. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5957 |
| lgpCondId5958BatteryTemperatureOutofRange Battery temperature is outside of acceptable range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5958 |
| lgpCondId5960InverterOverload Inverter in overload fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5960 |
| lgpCondId5966AuxAirTempDeviceCommunicationLost Communication with external auxiliary device providing an air
temperature value has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5966 |
| lgpCondId5967ModbusPowerMeterCommunicationLost Communication with Modbus power meter has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5967 |
| lgpCondId5968InverterDesaturation Inverter Desaturation. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5968 |
| lgpCondId5969GenericDICFault The control board reports a fault - Service required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5969 |
| lgpCondId5970GroundFault An AC phase to ground fault or three phase fault to ground exists
on the output of the UPS. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5970 |
| lgpCondId5973InputBreakerOpen The main input breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5973 |
| lgpCondId5974NeutralBreakerOpen The neutral breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5974 |
| lgpCondId5975OutputBreakerOpen The output breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5975 |
| lgpCondId5976MaintenanceBypassBreakerClosed The maintenance bypass breaker is closed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5976 |
| lgpCondId5977BatteryBreakerOpen The battery circuit is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5977 |
| lgpCondId5978RectifierIsolationBreakerRFBOpen The rectifier isolation breaker (RFB) indicates that it is in the
open position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5978 |
| lgpCondId5982BypassBreakerSBBOpen The bypass circuit breaker (SBB) indicates that it is in the open
position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5982 |
| lgpCondId5983BypassIsolationBreakerBIBOpen The bypass isolation breaker (BIB) indicates that it is in the
open position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5983 |
| lgpCondId5984BypassUndervoltageWarning The voltage on one or more bypass phases is less than a specified
percentage of the nominal voltage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5984 |
| lgpCondId5985BypassStaticSwitchBPSSOn The Bypass Static Switch has been turned on. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5985 |
| lgpCondId5998BattOvtempWarning A battery temperature sensor is reporting a value above the
setpoint. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.5998 |
| lgpCondId6009InverterOutputBreakerOpen The inverter output breaker indicates that it is in the open
position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6009 |
| lgpCondId6011EquipmentOverTempWarning Equipment over temperature warning is a summary event based on the
detection of at least one measured temperature exceeding a
threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6011 |
| lgpCondId6012EquipmentOvertemperatureLimit The equipment air temperature has exceeded its maximum set point. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6012 |
| lgpCondId6045RectifierInputBreakerOpen The rectifier isolation breaker indicates that it is in the open
position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6045 |
| lgpCondId6046LoadonUPS The output is being supplied power from the inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6046 |
| lgpCondId6047Core2CoreFuseFailure Core-2-core fuse failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6047 |
| lgpCondId6052SystemOutputBreakerOpen The system output breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6052 |
| lgpCondId6059InverterRelayFault The inverter relay has malfunctioned. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6059 |
| lgpCondId6060TransfertoBypassSystemOverload The UPS System has transferred to bypass because the active power
modules cannot support the critical load. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6060 |
| lgpCondId6061InputSourceBackfeed The battery is backfeeding the input source. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6061 |
| lgpCondId6062LossofSynchronization The inverter and bypass are no longer synchronized. . | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6062 |
| lgpCondId6063BatteryConverterCurrentLimit The battery converter has reached is maximum current limit. . | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6063 |
| lgpCondId6064LBSCableFailure Load Bus Sync communications is abnormal. A problem with the LBS
cable may exist. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6064 |
| lgpCondId6065BatteryChargeEqualizationTimeout The battery equalizing is time out. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6065 |
| lgpCondId6066ParallelCableFailure The UPS parallel system communications is abnormal. A problem with
the parallel cable may exist. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6066 |
| lgpCondId6067BatteryFault A short circuit exists in the battery system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6067 |
| lgpCondId6068BatteryRoomAlarm The ambient temperature of the battery room is abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6068 |
| lgpCondId6080UPSCCommunicationFailure The UPSC has failed to communicate in a designated time period. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6080 |
| lgpCondId6092Compressor1BThermalOverload Fixed compressor 1B is shut down due to thermal overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6092 |
| lgpCondId6093Compressor2BThermalOverload Fixed compressor 2B is shut down due to thermal overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6093 |
| lgpCondId6094Compressor1BHoursExceeded Fixed compressor 1B run hours have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6094 |
| lgpCondId6095Compressor2BHoursExceeded Fixed compressor 2B run hours have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6095 |
| lgpCondId6100CondenserRemoteShutdown Condenser is shut down by a remote signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6100 |
| lgpCondId6105ExternalCondenserTVSSIssue The condenser Transient Voltage Surge Suppressor or Surge
Protection Device has failed, as indicated by an external input
signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6105 |
| lgpCondId6106ExternalCondenserVFDIssue The condenser fan Variable Frequency Drive is offline, as
indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6106 |
| lgpCondId6107ExternalCondenserIssue Condenser is not operating within its operational parameters, as
indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6107 |
| lgpCondId6119Slotsnotavailable The number of sensors exceeds the number of allocated slots and
cannot be displayed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6119 |
| lgpCondId6180BatteryUnderVoltage Battery voltage is too low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6180 |
| lgpCondId6182ReplaceBattery The battery is due for replacement. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6182 |
| lgpCondId6186InputFrequencyDeviation The input frequency is outside of the normal range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6186 |
| lgpCondId6187ShutdownPending Shutdown is pending. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6187 |
| lgpCondId6194SystemRebootCommandIssued Reboot command issued to the system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6194 |
| lgpCondId6203SensorAdded Sensor Added. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6203 |
| lgpCondId6204SensorRemoved Sensor Removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6204 |
| lgpCondId6205WaterLeakDetected Water leak detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6205 |
| lgpCondId6210FirmwareUpdateInProgress Firmware update has started and is in progress. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6210 |
| lgpCondId6211FirmwareUpdateCompletedSuccessfully Firmware update has completed successfully. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6211 |
| lgpCondId6212FirmwareUpdateCompletedUnsuccessfully Firmware update has completed, but was not successful. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6212 |
| lgpCondId6216PrechargeCircuitFailed DC Bus precharge/discharge didn't reach specified level within a
specified time. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6216 |
| lgpCondId6217MemoryCardRemoved The memory card on the control board has been removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6217 |
| lgpCondId6218AutoCalibrationActive The system is automatically calibrating ADC channels. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6218 |
| lgpCondId6219AutoCalibrationFailed ADC channel calibration has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6219 |
| lgpCondId6220ModuleOutputBreakerOpen The module output breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6220 |
| lgpCondId6221NeutralVoltageFault Voltage observed on neutral line. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6221 |
| lgpCondId6222BranchLoadLoss Loss of load on branch detected. Branch circuit breaker might be
open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6222 |
| lgpCondId6225RemoteSensorLowHumidity Remote sensor humidity has dropped below a lower threshold. The
event is deactivated when the humidity rises above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6225 |
| lgpCondId6226RemoteSensorHighHumidity Remote sensor humidity has exceeded an upper threshold. The event
is deactivated when the humidity drops below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6226 |
| lgpCondId6227RemoteSensorAverageLowHumidity The average humidity of multiple remote sensors on the cooling
unit has dropped below a lower threshold. The event is
deactivated when the humidity rises above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6227 |
| lgpCondId6228RemoteSensorAverageHighHumidity The average humidity of multiple remote sensors on the cooling
unit has exceeded an upper threshold. The event is deactivated
when the humidity drops below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6228 |
| lgpCondId6230RemoteSensorSystemAverageHighHumidity The average humidity of multiple remote sensors on interconnected
cooling units in a single system has exceeded an upper threshold.
The event is deactivated when the humidity drop… | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6230 |
| lgpCondId6231LowCompressorSuperheat Compressor suction superheat has dropped below a lower threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6231 |
| lgpCondId6232SECUnspecifiedGeneralEvent One or more unspecified events active for the Superheat and
Envelope Controller. See local unit display for further details. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6232 |
| lgpCondId6233SECCommunicationLost Communication with the Superheat and Envelope Controller has been
lost. The event is deactivated when communication is re
-established. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6233 |
| lgpCondId6236PowerSourceAIssue No power is detected at power source input 'A'. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6236 |
| lgpCondId6237PowerSourceBIssue No power is detected at power source input 'B'. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6237 |
| lgpCondId6239FluidValveHoursExceeded Operating hours for the fluid valve have exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6239 |
| lgpCondId6253BoosterFailure Booster failure - boost is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6253 |
| lgpCondId6254ChargerFailure Charger Failure - Charger is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6254 |
| lgpCondId6274UnitTopReturnAirSensorFailure Return air sensor at the top of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6274 |
| lgpCondId6275UnitMiddleReturnAirSensorFailure Return air sensor in the middle of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6275 |
| lgpCondId6276UnitBottomReturnAirSensorFailure Return air sensor at the bottom of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6276 |
| lgpCondId6277UnitTopSupplyAirSensorFailure Supply air sensor at the top of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6277 |
| lgpCondId6278UnitMiddleFirstSupplyAirSensorFailure First supply air sensor in the middle of the unit is disconnected
or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6278 |
| lgpCondId6279UnitBottomSupplyAirSensorFailure Supply air sensor at the bottom of the unit is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6279 |
| lgpCondId6284UnitMiddleSecondSupplyAirSensorFailure Second supply air sensor in the middle of the unit is disconnected
or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6284 |
| lgpCondId6293ChilledWaterControlActive Chilled water inlet temperature control function is enabled due to
'bad' water. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6293 |
| lgpCondId6294ChilledWaterFlowTransducerFailure Chilled water flow transducer is disconnected or the signal is out
of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6294 |
| lgpCondId6295ChilledWaterInletTemperatureSensorFailure Chilled water inlet temperature sensor is disconnected or the
signal is out of range. The sensor is mandatory for the chilled
water flow function. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6295 |
| lgpCondId6296ChilledWaterHighInletTemperature Chilled water inlet temperature has exceeded an upper threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6296 |
| lgpCondId6297Modbus010VModuleCommunicationFailure Modbus 0-10V module for managing the second Chilled Water circuit
valve is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6297 |
| lgpCondId6299RackDoorsOpen Rack doors opened due to supply air temperature exceeding the
[Rack Door Open High Supply Air Temperature Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6299 |
| lgpCondId6303TeamStaticPressureSensorFailure The team static pressure sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6303 |
| lgpCondId6304HeatingLockout Heating is shut down and disabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6304 |
| lgpCondId6305FreeCoolingStoppedHighRoomTemp Free cooling is temporarily disabled due to room temperature
exceeding a preset delta above the the set point. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6305 |
| lgpCondId6306ColdAisleTemperatureHumidityTeamSensorFailure Cold aisle team sensor measuring air temperature and humidity is
disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6306 |
| lgpCondId6309ColdAisleAirSensorFailure Cold aisle sensor measuring air temperature and humidity is
disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6309 |
| lgpCondId6310ChilledWaterInletTemperatureControlActive Chilled water inlet temperature control is active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6310 |
| lgpCondId6313ChilledWaterInletTemperatureSensorFailure Chilled water inlet temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6313 |
| lgpCondId6314ChilledWaterOutletTemperatureSensorFailure Chilled water outlet temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6314 |
| lgpCondId6315ChilledWaterFlowMeterSensorFailure Chilled water flow meter sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6315 |
| lgpCondId6333Bypassoutofsync Bypass and Inverter inputs are not in sync. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6333 |
| lgpCondId6348SystemOutputoffasrequested The UPS has shutdown as requested, i.e., the output is off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6348 |
| lgpCondId6349SystemOffasrequested The entire UPS has shutdown as commanded. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6349 |
| lgpCondId6350GeneralFault A general fault in the UPS has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6350 |
| lgpCondId6351UPSAwaitingPower The UPS output is off and the UPS is awaiting the return of input
power. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6351 |
| lgpCondId6352AutonomyCalibration Calibration test occurred. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6352 |
| lgpCondId6353GeneralWarning A warning in the UPS has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6353 |
| lgpCondId6354BatteryCharging The UPS battery is charging (battery charge percentage lower than
98). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6354 |
| lgpCondId6355BackfeedRelayFailure Bypass SCR is wrongly on or commutated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6355 |
| lgpCondId6356BatteryCircuitOpen Battery Circuit Open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6356 |
| lgpCondId6357SystemRestartPending A request for UPS restart has been received. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6357 |
| lgpCondId6358PipeTemperatureSensorFailure Air temperature sensor located in the pipe is not sending a valid
value. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6358 |
| lgpCondId6362SFAReservedEvent26 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6362 |
| lgpCondId6363SFAReservedEvent27 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6363 |
| lgpCondId6364SFAReservedEvent28 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6364 |
| lgpCondId6365SFAReservedEvent29 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6365 |
| lgpCondId6366SFAReservedEvent30 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6366 |
| lgpCondId6367SFAReservedEvent31 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6367 |
| lgpCondId6368SFAReservedEvent32 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6368 |
| lgpCondId6369SFAReservedEvent33 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6369 |
| lgpCondId6370SFAReservedEvent34 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6370 |
| lgpCondId6371SFAReservedEvent35 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6371 |
| lgpCondId6372SFAReservedEvent36 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6372 |
| lgpCondId6373SFAReservedEvent37 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6373 |
| lgpCondId6374SFAReservedEvent38 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6374 |
| lgpCondId6375SFAReservedEvent39 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6375 |
| lgpCondId6376SFAReservedEvent40 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6376 |
| lgpCondId6377SFAReservedEvent41 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6377 |
| lgpCondId6378SFAReservedEvent42 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6378 |
| lgpCondId6379SFAReservedEvent43 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6379 |
| lgpCondId6380SFAReservedEvent44 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6380 |
| lgpCondId6381SFAReservedEvent45 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6381 |
| lgpCondId6382SFAReservedEvent46 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6382 |
| lgpCondId6383SFAReservedEvent47 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6383 |
| lgpCondId6384SFAReservedEvent48 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6384 |
| lgpCondId6385SFAReservedEvent49 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6385 |
| lgpCondId6386SFAReservedEvent50 Reserved event for SFA use. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6386 |
| lgpCondId6438PowerModuleInputCurrentAbnormal Input current of the power module is abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6438 |
| lgpCondId6439PowerModuleBalancerofDCBusFailure Balancer of DC Bus in the power module has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6439 |
| lgpCondId6440PowerModuleFuseFailure A summary event indicating one or more fuse failures in the power
module. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6440 |
| lgpCondId6441PowerModulePowerSupplyFailure Power module power supply failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6441 |
| lgpCondId6450PDUPoweredOn The PDU was powered on. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6450 |
| lgpCondId6453InputWiringFault The neutral/ground conductors on the input wiring are not properly
bonded, or the line/neutral conductors have been swapped. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6453 |
| lgpCondId6454DCtoDCConverterFault A failure has occurred in the battery discharge circuit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6454 |
| lgpCondId6455LeakSensorCableFault A fault is detected in the 'Leak Sensor' cable. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6455 |
| lgpCondId6464RebootMonitoringAgent Request from managed device to reboot the monitoring agent. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6464 |
| lgpCondId6474SaveIPv4SettingstoAgent Request from managed device for the monitoring agent to save/set
IPv4 settings. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6474 |
| lgpCondId6488SaveIPv6SettingstoAgent Request from managed device for the monitoring agent to save/set
IPv6 settings. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6488 |
| lgpCondId6508SaveLIFETMSettingstoAgent Request from managed device for the monitoring agent to save/set
LIFE (TM) settings. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6508 |
| lgpCondId6518StandbyUnitActivatedDuetoChillerFailure External chiller unit has failed for this unit, so the standby
cooling unit has been activated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6518 |
| lgpCondId6522PDUResidualOverCurrent The system has detected a PDU residual over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6522 |
| lgpCondId6527PDUOverCurrentProtection The PDU over current protection is triggered. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6527 |
| lgpCondId6528PowerModuleLeverUnlocked The power module is inactive because the lever is in the unlocked
position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6528 |
| lgpCondId6529HardwareMismatch The assigned system model settings do not match the actual
installed hardware. The module count is wrong, or a module of the
wrong type is installed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6529 |
| lgpCondId6530SupplyNTCAirSensorIssue The supply NTC air sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6530 |
| lgpCondId6531ExternalAirSensorCIssue The external air sensor C is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6531 |
| lgpCondId6532ExternalAirSensorDIssue The external air sensor D is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6532 |
| lgpCondId6533ExternalAirSensorEIssue The external air sensor E is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6533 |
| lgpCondId6534PumpThermalOverload Pump is shut down due to thermal overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6534 |
| lgpCondId6535XDModuleCommunicationLost Communication with XD Module has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6535 |
| lgpCondId6536MMSCapacityExceeded The critical load is larger than the redundant rating of a 1+N
redundant multi-module system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6536 |
| lgpCondId6538TSAControlInputIssue The analog input used to set the air temperature set point for
cooling control is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6538 |
| lgpCondId6539ChilledWaterValveHoursExceeded [Chilled Water Valve Hours] has exceeded [Chilled Water Valve
Operating Hours Threshold]. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6539 |
| lgpCondId6540FSAControlInputIssue The analog input used to set the air temperature set point for fan
speed control is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6540 |
| lgpCondId6541AutoTuneLicenseExpiring License for the AutoTune feature has not been refreshed in 30 days
and will be expiring soon. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6541 |
| lgpCondId6542AutoTuneLicenseExpired License for the AutoTune feature has expired. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6542 |
| lgpCondId6543UnitInStandbyDueToCoolingLoss Unit forced into standby because it is unable to provide any
cooling. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6543 |
| lgpCondId6544ControlUnitsRemoteShutdownMismatch The remote shutdown status of the primary control unit does not
match the remote shutdown status of the secondary control unit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6544 |
| lgpCondId6545SecondaryControlUnitCommunicationLost The primary control unit has lost Ethernet communications with the
secondary control unit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6545 |
| lgpCondId6546ControlUnitsUnitCodeMismatch Unit codes for the primary and secondary control units do not
match. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6546 |
| lgpCondId6547SSAControlInputIssue The analog input used to set the static pressure set point for fan
speed control is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6547 |
| lgpCondId6587TransferCountCleared A system event indicating the transfer count has been cleared. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6587 |
| lgpCondId6588EnergyCounterCleared A system event indicating the energy counter (e.g. KWH) has been
cleared. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6588 |
| lgpCondId6589HistoryLogsFull The history logs are full. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6589 |
| lgpCondId6590HistoryLogsCleared History logs have been cleared. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6590 |
| lgpCondId6591EventLogCleared All past alarms and faults have been cleared. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6591 |
| lgpCondId6592SystemDateChanged The system date has been updated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6592 |
| lgpCondId6593SystemTimeChanged The system time has been updated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6593 |
| lgpCondId6594AccessPasswordChanged The access password has been changed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6594 |
| lgpCondId6595ConfigModified A setpoint has been updated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6595 |
| lgpCondId6612SCRShort The SCR is in a short condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6612 |
| lgpCondId6613SCROpen The SCR is in an open condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6613 |
| lgpCondId6614ACPowerSupplyFail A failure of the AC Power Supply has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6614 |
| lgpCondId6615DCPowerSupplyFail A failure of the DC Power Supply has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6615 |
| lgpCondId6616VoltageSensorFail A voltage sensor failure has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6616 |
| lgpCondId6617SCRSensorFail The SCR sensor module failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6617 |
| lgpCondId6618CurrentSensorFail The current sensor module failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6618 |
| lgpCondId6619GateDriveFail The Gate Drive module failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6619 |
| lgpCondId6620SurgeFail The surge module failed for the input source. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6620 |
| lgpCondId6621FastUnderVoltage Fast under voltage detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6621 |
| lgpCondId6622SlowUnderVoltage Slow under voltage detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6622 |
| lgpCondId6623OverVoltage Over voltage detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6623 |
| lgpCondId6624OverUnderFrequencyFail An over or under frequency condition has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6624 |
| lgpCondId6625GeneralSourceFailure A non-specific failure has been detected in the source. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6625 |
| lgpCondId6626OverCurrent An over current has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6626 |
| lgpCondId6627PeakCurrentOffLimit The peak current has exceeded the setpoint defined by I-PK Xfer
Lockout. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6627 |
| lgpCondId6628SyncFail A phase rotation/out of synchronization failure has been detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6628 |
| lgpCondId6629InputOverVoltage Input over voltage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6629 |
| lgpCondId6630InputUnderVoltage Input under voltage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6630 |
| lgpCondId6631InputOverUnderFrequency Input over/under frequency. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6631 |
| lgpCondId6635VoltageSenseFail Output voltage sense failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6635 |
| lgpCondId6636LoadonAlternateSource The load is on the alternate source. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6636 |
| lgpCondId6637UnderVoltageFail Output under voltage failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6637 |
| lgpCondId6638OutputOverCurrent Output is over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6638 |
| lgpCondId6639GroundOverCurrent Ground is over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6639 |
| lgpCondId6640NeutralOverCurrent Neutral is over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6640 |
| lgpCondId6641LoadVoltageTHD Load voltage THD has exceeded the set limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6641 |
| lgpCondId6662ControlLogicFail A control logic module has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6662 |
| lgpCondId6663PowerSupplyLogicFail A power supply module has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6663 |
| lgpCondId6664ExternalCommsFailure External communications failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6664 |
| lgpCondId6665HeatSinkOverTemp The system heat sink temperature has exceeded design limits. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6665 |
| lgpCondId6666AutomaticTransferInhibited Automatic transfer is inhibited. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6666 |
| lgpCondId6667InputSourceTransferInhibited Input source transfer is inhibited. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6667 |
| lgpCondId6676CB1ShuntTrip CB1 Shunt Trip event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6676 |
| lgpCondId6677CB2ShuntTrip CB2 Shunt Trip event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6677 |
| lgpCondId6678CB6NeutralOpen CB6 neutral open event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6678 |
| lgpCondId6679ContactorNeutralFail Contactor Neutral Fail event. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6679 |
| lgpCondId6680CB1BreakerOpen CB1 Breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6680 |
| lgpCondId6681CB2BreakerOpen CB2 Breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6681 |
| lgpCondId6682CB4BreakerClosed CB4 breaker closed event. Normal state is breaker open. Latched
state is breaker closed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6682 |
| lgpCondId6683CB5BreakerClosed CB5 breaker closed event. Normal state is breaker open. Latched
state is breaker closed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6683 |
| lgpCondId6684CB3BreakerOpen CB3 breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6684 |
| lgpCondId6685CB3ABreakerOpen CB3A breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6685 |
| lgpCondId6686CB6BreakerOpen CB6 breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6686 |
| lgpCondId6687CB7BreakerOpen CB7 breaker open event. Normal state is breaker closed. Latched
state is breaker open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6687 |
| lgpCondId6691GroupIndependentOn The group standby/cascade state for this unit has been overridden.
The unit has been forced on. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6691 |
| lgpCondId6692GroupIndependentOff The group standby/cascade state for this unit has been overridden.
The unit has been forced off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6692 |
| lgpCondId6693BranchResidualOverCurrent The system has detected a branch residual over current condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6693 |
| lgpCondId6694ReceptacleResidualOverCurrent The system has detected a receptacle residual over current
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6694 |
| lgpCondId6728BuckOn The input voltage is currently being bucked (lowered) by the
inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6728 |
| lgpCondId6729BoostOn The input voltage is currently being boosted (raised) by the
inverter. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6729 |
| lgpCondId6739Compressor1HighPressure Compressor 1 High Pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6739 |
| lgpCondId6740Compressor2HighPressure Compressor 2 High Pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6740 |
| lgpCondId6741Compressor1ThermalOverload Compressor 1 Thermal Overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6741 |
| lgpCondId6742Compressor2ThermalOverload Compressor 2 Thermal Overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6742 |
| lgpCondId6758CompressorFreezeProtection Compressor has entered the freeze protection phase. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6758 |
| lgpCondId6773FanTemperatureCompensationLimitReached Unit is configured for fan temperature compensation, and the fan
control set point cannot be reduced any further due to high
remote air temperature sensor readings. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6773 |
| lgpCondId6774ModbusECFanCommunicationLost Communication with Modbus EC fan has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6774 |
| lgpCondId6785AnalogTemperatureControlIssue Analog input used for creating the control temperature (instead of
reading a sensor) is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6785 |
| lgpCondId6786SubgroupFirmwareUpdateRequired Mismatch of subgroup firmware. Both the primary and secondary
control boards must be running the same firmware version. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6786 |
| lgpCondId6787SubgroupSecondaryControlUnitIssue Subgroup secondary control unit is reporting an unspecified issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6787 |
| lgpCondId6788EEVCommunicationLost Communication with Electronic Expansion Valve unit has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6788 |
| lgpCondId6789EEVMotorIssue Electronic Expansion Valve stepper motor issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6789 |
| lgpCondId6790EEVFeedbackIssue Electronic Expansion Valve feedback error. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6790 |
| lgpCondId6791EEVPressureSensorIssue Electronic Expansion Valve refrigerant pressure sensor is
disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6791 |
| lgpCondId6792EEVCoilTemperatureSensorIssue Electronic Expansion Valve coil temperature sensor is disconnected
or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6792 |
| lgpCondId6793EEVDischargeTemperatureSensorIssue Electronic Expansion Valve discharge temperature sensor is
disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6793 |
| lgpCondId6794EEVSumpTemperatureSensorIssue Electronic Expansion Valve sump temperature sensor is disconnected
or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6794 |
| lgpCondId6795EEVBatteryTestIssue Electronic Expansion Valve battery state cannot be determined. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6795 |
| lgpCondId6796EEVBatteryPersistentIssue Electronic Expansion Valve has continuously detected a 'bad'
battery condition for an extended period of time. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6796 |
| lgpCondId6798PumpCycleLockOut Pump is locked out due to multiple pump-to-compressor transitions
at cold ambient air temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6798 |
| lgpCondId6799PumpBoardFirmwareUpdateRequired Mismatch of pump board firmware. All pump boards must be running
the same firmware version. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6799 |
| lgpCondId6800PumpControlBoardIssue Pump is shut down due to a pump control board issue. Control
board must be rebooted. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6800 |
| lgpCondId6801PumpInvalidDataShutdown Pump is shut down due to invalid data. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6801 |
| lgpCondId6802PumpInputPressureSensorIssue Pump input refrigerant pressure sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6802 |
| lgpCondId6803PumpInputTemperatureSensorIssue Pump input refrigerant temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6803 |
| lgpCondId6804PumpOutputPressureSensorIssue Pump output refrigerant pressure sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6804 |
| lgpCondId6805PumpOutputTemperatureSensorIssue Pump output refrigerant temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6805 |
| lgpCondId6806PumpCommunicationLost Communication with pump unit has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6806 |
| lgpCondId6807PumpRemoteShutdown Pump is shut down by a remote signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6807 |
| lgpCondId6808PumpUSBEthernetPortIssue Pump control board USB or Ethernet interface has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6808 |
| lgpCondId6809PumpStartupFailure Multiple attempts to start the pump have failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6809 |
| lgpCondId6810PumpInverterFailure Pump inverter is reporting a failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6810 |
| lgpCondId6811PumpTVSSIssue Pump Transient Voltage Surge Suppressor or Surge Protection Device
has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6811 |
| lgpCondId6812PumpHighSuperheat Pump inlet refrigerant superheat temperature is too high, or the
pump has been running too long with the condenser fan off. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6812 |
| lgpCondId6813CondenserHighAmbientAirTempDelta The difference between condenser measured ambient air temperatures
has been too large for an extended period of time. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6813 |
| lgpCondId6814CondenserLeeTempOptionMismatch Lee-Temp option configured at a condenser unit does not match Lee
-Temp option configured at the control unit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6814 |
| lgpCondId6815CondenserBoardFirmwareUpdateRequired Mismatch of condenser board firmware. All condenser boards must
be running the same firmware version. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6815 |
| lgpCondId6816CondenserToPumpHighRefrigerantTempDelta Temperature delta between the condenser output refrigerant and
pump inlet refrigerant is too large. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6816 |
| lgpCondId6817CondenserRefrigerantTypeMismatch Refrigerant type configured at condenser unit does not match
refrigerant type configured at the control unit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6817 |
| lgpCondId6818ExternalSupplyFluidHighTemperature Supply fluid temperature has exceeded a threshold, as indicated by
an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6818 |
| lgpCondId6819ExternalSupplyFluidTempSensorIssue Supply fluid temperature sensor is disconnected or the signal is
out of range, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6819 |
| lgpCondId6822AuditLogUpdate Audit log has been updated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6822 |
| lgpCondId6824ExternalSupplyFluidFlowIssue Supply fluid flow issue, as indicated by an external input signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.6824 |
| lgpCondId7163ModbusAutomaticTransferSwitchCommunicationLost Communications with Modbus Automatic Transfer Switch has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7163 |
| lgpCondId7164BatteryDeepDischarge UPS depleted the batteries to the end of discharge(EOD) voltage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7164 |
| lgpCondId7461BatteryBreakerOpenFailure Battery circuit breaker failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7461 |
| lgpCondId7464LithiumIonBatterySystemAbnormal Lithium-Ion Battery System Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7464 |
| lgpCondId7465LithiumIonBatterySystemDisconnectRequest A request to disconnect the Lithium-Ion battery system was
received. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7465 |
| lgpCondId7467ThermalMarginWarning The thermal margin has dropped below the threshold value. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7467 |
| lgpCondId7474FlowSensorFailure Fluid flow sensor failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7474 |
| lgpCondId7475CheckWaterSystem Fluid check water system. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7475 |
| lgpCondId7476PumpOperatingWithoutFlow Fluid pump operation with no flow. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7476 |
| lgpCondId7483PumpInverterFailure Fluid pump inverter failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7483 |
| lgpCondId7484PumpFlowFailure Fluid pump flow failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7484 |
| lgpCondId7485BatteryCircuitBreakerOpen Battery circuit breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7485 |
| lgpCondId7486LithiumIonBatterySystemCommunicationAbnormal Lithium-Ion Battery System Communication Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7486 |
| lgpCondId7487LithiumIonBatterySystemWarning The Lithium-Ion Battery system has one or more warnings. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7487 |
| lgpCondId7488LithiumIonBatterySystemFault The Lithium-Ion Battery system has one or more faults. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7488 |
| lgpCondId7489LowSupplyAirHumidity Supply air humidity has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7489 |
| lgpCondId7490HighSupplyAirHumidity Supply air humidity has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7490 |
| lgpCondId7491LowRemoteAirHumidity Remote air humidity has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7491 |
| lgpCondId7492HighRemoteAirHumidity Remote air humidity has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7492 |
| lgpCondId7493SupplyHumiditySensorIssue The humidity sensor at the outlet of the unit is disconnected or
the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7493 |
| lgpCondId7494ExternalHumiditySensorIssue The external humidity sensor is disconnected or the signal is out
of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7494 |
| lgpCondId7495ExternalAirSensorIssue The external air sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7495 |
| lgpCondId7496CompressorDriverFailureLockout Compressor lockout occurred due to multiple failures of the
compressor driver board. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7496 |
| lgpCondId7497CompressorDriverFailure Compressor driver board failure detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7497 |
| lgpCondId7498CompressorDriverCommunicationFailureLockout Compressor lockout occurred due to multiple communication failures
with the compressor driver board. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7498 |
| lgpCondId7499CompressorPressureDifferenceLockout Compressor lockout occurred due to multiple compressor pressure
differences. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7499 |
| lgpCondId7500CompressorDriverCommunicationFailure A communication failure occurred with the compressor driver board. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7500 |
| lgpCondId7501CompressorPressureDifference Compressor pressure difference is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7501 |
| lgpCondId7503ElectricalHeaterFailure The electric heater temperature exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7503 |
| lgpCondId7504WaterValveFailure There is an issue with the chilled water valve. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7504 |
| lgpCondId7506SupplyFluidLowFlow Supply fluid flow has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7506 |
| lgpCondId7507InletFluidLowPressure Inlet fluid pressure has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7507 |
| lgpCondId7508InletFluidHighPressure Inlet fluid pressure has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7508 |
| lgpCondId7509OutletFluidUnderTemp Outlet fluid temperature has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7509 |
| lgpCondId7510OutletFluidOverTemp Outlet fluid temperature has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7510 |
| lgpCondId7511InletFluidOverTemp Inlet fluid temperature has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7511 |
| lgpCondId7512InletFluidUnderTemp Inlet fluid temperature has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7512 |
| lgpCondId7515FanDetectionBoardCommunicationFailure Communication with the fan detection board has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7515 |
| lgpCondId7518SurgeProtectionDeviceAlarm Surge Protection Device Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7518 |
| lgpCondId7519PowerOppositePhase The power input phases are incorrectly connected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7519 |
| lgpCondId7520PowerLossOfPhase One of the input phases has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7520 |
| lgpCondId7522LossofAirflow Loss of airflow detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7522 |
| lgpCondId7523TeamworkMasterisofflineornotconnectedtothenetwork Loss of Teamwork Master. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7523 |
| lgpCondId7524LossofTeamworkSlave Teamwork Slave is offline or not connected to the network. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7524 |
| lgpCondId7525RepeatedTeamworkAddress The network address of two or more units in a teamwork are the
same. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7525 |
| lgpCondId7526AirDamperFailure There is an issue with the air damper. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7526 |
| lgpCondId7537FilterMaintenanceDue The operating hours of the filter has exceeded the threshold and
needs to be maintained or replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7537 |
| lgpCondId7538HeaterMaintenanceDue The operating hours of the heater has exceeded the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7538 |
| lgpCondId7539HighCompressorPressure Compressor pressure has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7539 |
| lgpCondId7540HighCompressorPresssureLockout Compressor lockout occurred due to high compressor pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7540 |
| lgpCondId7541LowCompressorPressure Compressor pressure has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7541 |
| lgpCondId7542LowCompressorPressureLockout Compressor lockout occurred due to low compressor pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7542 |
| lgpCondId7543HighCompressorDischargeTemperature Compressor discharge temperature has exceeded a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7543 |
| lgpCondId7544HighCompressorDischargeTemperatureLockout Compressor Lockout occurred due to high compressor discharge
temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7544 |
| lgpCondId7545LowCompressorDischargeTemperature Compressor discharge temperature has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7545 |
| lgpCondId7546LowCompressorDischargeTemperatureLockout Compressor lockout occurred due to low compressor discharge
temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7546 |
| lgpCondId7547LowCompressorDischargeSuperheat Compressor discharge superheat has dropped below a threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7547 |
| lgpCondId7548LowCompressorDischargeSuperheatLockout Compressor lockout occurred due to low compressor discharge
superheat temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7548 |
| lgpCondId7549HighCompressorPressureAbnormal Compressor pressure has exceeded a normal threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7549 |
| lgpCondId7550LowCompressorPressureAbnormal Compressor pressure has dropped below a normal threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7550 |
| lgpCondId7551EEVDriverCommunicationFailure A communication failure occurred with the EEV driver board. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7551 |
| lgpCondId7552EEVDriverFailure EEV driver board failure detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7552 |
| lgpCondId7553HighCompressorPressureSensorFailure High compressor pressure sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7553 |
| lgpCondId7554LowCompressorPressureSensorFailure Low compressor pressure sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7554 |
| lgpCondId7555LowCompressorPressureSensorFailureLockout Compressor lockout occurred due to low compressor pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7555 |
| lgpCondId7556CompressorDischargeTemperatureSensorFailure Compressor discharge temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7556 |
| lgpCondId7557CompressorSuctionTemperatureSensorFailure Compressor suction temperature sensor is disconnected or the
signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7557 |
| lgpCondId7558WaterFlowSensorFailure Water flow sensor is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7558 |
| lgpCondId7559LossofAirflowSensorFailure Airflow sensor is disconnected or the signal is out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7559 |
| lgpCondId7560FilterPressureDifferenceSensorFailure Filter pressure difference sensor is disconnected or the signal is
out of range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7560 |
| lgpCondId7561CustomAlarm Custom Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7561 |
| lgpCondId7562WaterPressureSensorFailure Water pressure sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7562 |
| lgpCondId7563FanStaticPressureSensorFailure Fan static pressure sensor is disconnected or the signal is out of
range. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7563 |
| lgpCondId7568SystemShutdownEPO Unit shutdown by Emergency Power Off (EPO) switch. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7568 |
| lgpCondId7569SystemShutdownUndervoltage System shutdown due to an undervoltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7569 |
| lgpCondId7570TransformerHighTemperature The transformer crossed the high temperature threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7570 |
| lgpCondId7571TransformerTemperatureSensorFailure The transformer temperature sensor is reporting an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7571 |
| lgpCondId7572MeteringBoardCommunicationFail The metering board(s) reported a communication failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7572 |
| lgpCondId7573AccessoryBoardCommunicationFail The accessory board(s) reported a communication failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7573 |
| lgpCondId7574SystemMisconfiguration The system reported a misconfiguration. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7574 |
| lgpCondId7575SystemFirmwareIncompatibility The system reported a firmware incompatibility. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7575 |
| lgpCondId7576MainInputBreaker1Tripped The main input circuit breaker 1 reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7576 |
| lgpCondId7577MainInputBreaker1AccessoryError The main input circuit breaker 1 reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7577 |
| lgpCondId7578MainInputBreaker1OpenFail The main input circuit breaker 1 failed to open as commanded. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7578 |
| lgpCondId7579MainInputBreaker2Tripped The main input circuit breaker 2 reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7579 |
| lgpCondId7580MainInputBreaker2AccessoryError The main input circuit breaker 2 reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7580 |
| lgpCondId7581MainInputBreaker2OpenFail The main input circuit breaker 2 failed to open as commanded. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7581 |
| lgpCondId7588LossofCommunication The system board has stopped communicating. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7588 |
| lgpCondId7589NoInitialCommunication The system board has not established initial communications. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7589 |
| lgpCondId7590Misconfiguration The system board is misconfigured. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7590 |
| lgpCondId7591FirmwareIncompatibility The system board firmware is incompatible with the other
components. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7591 |
| lgpCondId7697OutputOvervoltage The output voltage crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7697 |
| lgpCondId7698OutputUndervoltage The output voltage crossed below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7698 |
| lgpCondId7699PhaseOvercurrent The phase current crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7699 |
| lgpCondId7700NeutralOvercurrent The neutral current crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7700 |
| lgpCondId7701GroundOvercurrent The ground current crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7701 |
| lgpCondId7702OutputFrequencyDeviation The output frequency deviated beyond the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7702 |
| lgpCondId7703EnergyMeasurementRollover The total accumulated energy value reached its limit and was reset
to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7703 |
| lgpCondId7704Input1Overvoltage The voltage crossed above the threshold of input 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7704 |
| lgpCondId7705Input1Undervoltage The voltage crossed below the threshold of input 1 . | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7705 |
| lgpCondId7706Input1PhaseLoss The voltage of one or more phases dropped below the threshold of
input 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7706 |
| lgpCondId7707Input1InvalidPhaseRotation The phases are not in the expected sequence for input 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7707 |
| lgpCondId7708Input1FrequencyDeviation The frequency deviated beyond the threshold of input 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7708 |
| lgpCondId7709Input1HighVoltageTHD The voltage total harmonic distortion crossed above the threshold
of input 1. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7709 |
| lgpCondId7710Input2Overvoltage The voltage crossed above the threshold of input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7710 |
| lgpCondId7711Input2Undervoltage The voltage crossed below the threshold of input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7711 |
| lgpCondId7712Input2PhaseLoss The voltage of one or more phases dropped below the threshold of
input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7712 |
| lgpCondId7713Input2InvalidPhaseRotation The phases are not in the expected sequence for input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7713 |
| lgpCondId7714Input2FrequencyDeviation The frequency deviated beyond the threshold of input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7714 |
| lgpCondId7715Input2HighVoltageTHD The voltage total harmonic distortion crossed above the threshold
of input 2. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7715 |
| lgpCondId7792PanelboardPhaseOvercurrent The phase current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7792 |
| lgpCondId7793PanelboardNeutralOvercurrent The neutral current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7793 |
| lgpCondId7794PanelboardGroundOvercurrent The ground current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7794 |
| lgpCondId7795PanelboardMainBreakerTripped The main panelboard circuit breaker reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7795 |
| lgpCondId7796PanelboardMainBreakerAccessoryError The main panelboard circuit breaker reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7796 |
| lgpCondId7797PanelboardEnergyMeasurementRollover The total accumulated energy value of the panelboard reached its
limit and was reset to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7797 |
| lgpCondId7822BranchPhaseOvercurrent The phase current crossed above the threshold of the branch. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7822 |
| lgpCondId7823BranchPhaseUndercurrent The phase current crossed below the threshold of the branch. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7823 |
| lgpCondId7824BranchEnergyMeasurementRollover The total accumulated energy value of the branch reached its limit
and was reset to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7824 |
| lgpCondId7896PanelboardPhaseOvercurrent The phase current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7896 |
| lgpCondId7897PanelboardNeutralOvercurrent The neutral current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7897 |
| lgpCondId7898PanelboardGroundOvercurrent The ground current crossed above the threshold of the panelboard. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7898 |
| lgpCondId7899PanelboardMainBreakerTripped The main panelboard circuit breaker reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7899 |
| lgpCondId7900PanelboardMainBreakerAccessoryError The main panelboard circuit breaker reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7900 |
| lgpCondId7901PanelboardEnergyMeasurementRollover The total accumulated energy value of the panelboard reached its
limit and was reset to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7901 |
| lgpCondId7953SubfeedPhaseOvercurrent The phase current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7953 |
| lgpCondId7954SubfeedNeutralOvercurrent The neutral current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7954 |
| lgpCondId7955SubfeedGroundOvercurrent The ground current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7955 |
| lgpCondId7956SubfeedBreakerTripped The subfeed circuit breaker reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7956 |
| lgpCondId7957SubfeedBreakerAccessoryError The subfeed circuit breaker reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7957 |
| lgpCondId7958SubfeedEnergyMeasurementRollover The total accumulated energy value reached its limit and was reset
to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.7958 |
| lgpCondId8029SubfeedPhaseOvercurrent The phase current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8029 |
| lgpCondId8030SubfeedNeutralOvercurrent The neutral current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8030 |
| lgpCondId8031SubfeedGroundOvercurrent The ground current crossed above the threshold of the subfeed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8031 |
| lgpCondId8032SubfeedBreakerTripped The subfeed circuit breaker reported a tripped state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8032 |
| lgpCondId8033SubfeedBreakerAccessoryError The subfeed circuit breaker reported an invalid state. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8033 |
| lgpCondId8034SubfeedEnergyMeasurementRollover The total accumulated energy value reached its limit and was reset
to zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8034 |
| lgpCondId8045ExternalInputContactState The state of the external input contact. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8045 |
| lgpCondId8047InternalInputContactState The state of the internal input contact. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8047 |
| lgpCondId8051CompressorDriveFailureU00 Compressor Drive Failure U00. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8051 |
| lgpCondId8052CompressorDriveFailureU01 Compressor Drive Failure U01. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8052 |
| lgpCondId8053CompressorDriveFailureU02 Compressor Drive Failure U02. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8053 |
| lgpCondId8054CompressorDriveFailureU03 Compressor Drive Failure U03. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8054 |
| lgpCondId8055CompressorDriveFailureU04 Compressor Drive Failure U04. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8055 |
| lgpCondId8056CompressorDriveFailureU05 Compressor Drive Failure U05. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8056 |
| lgpCondId8057CompressorDriveFailureU06 Compressor Drive Failure U06. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8057 |
| lgpCondId8058CompressorDriveFailureU07 Compressor Drive Failure U07. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8058 |
| lgpCondId8059CompressorDriveFailureU08 Compressor Drive Failure U08. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8059 |
| lgpCondId8060CompressorDriveFailureU09 Compressor Drive Failure U09. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8060 |
| lgpCondId8061CompressorDriveFailureU10 Compressor Drive Failure U10. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8061 |
| lgpCondId8062CompressorDriveFailureU11 Compressor Drive Failure U11. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8062 |
| lgpCondId8063CompressorDriveFailureU12 Compressor Drive Failure U12. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8063 |
| lgpCondId8064CompressorDriveFailureU13 Compressor Drive Failure U13. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8064 |
| lgpCondId8065CompressorDriveFailureU14 Compressor Drive Failure U14. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8065 |
| lgpCondId8066CompressorDriveFailureU15 Compressor Drive Failure U15. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8066 |
| lgpCondId8067EEVDriverUnselectRefrigerant EEV Driver Unselect Refrigerant. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8067 |
| lgpCondId8068CompressorDriveHeatsinkHighTemperature Compressor Drive Heatsink High Temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8068 |
| lgpCondId8069CompressorDriveOverCurrent Compressor Drive Over Current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8069 |
| lgpCondId8070CompressorDrivePhaseLoss Compressor Drive Phase Loss. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8070 |
| lgpCondId8071CompressorDriveDCPowerAbnormal Compressor Drive DC Power Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8071 |
| lgpCondId807210DISensorCommunicationFail 10DI Sensor Communication Fail. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8072 |
| lgpCondId8073SystemLackOfRefrigerant System Lack Of Refrigerant. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8073 |
| lgpCondId8075ValveCommunicationsFailure A valve is configured to exist but communications cannot be
established. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8075 |
| lgpCondId8076ValveIssue Valve is reporting abnormal operating condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8076 |
| lgpCondId8083CondensatePumpFailure Condensate Pump Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8083 |
| lgpCondId8096BypasscontrollingtheSCRautonomously The bypass is controlling the SCR autonomously because not all
inverters are online. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8096 |
| lgpCondId8098PowerModuleCommunicationstatus The control has detected a power module communication failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8098 |
| lgpCondId8100ECOmodeInhibited ECO mode is inhibited due to an external inhibit signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8100 |
| lgpCondId8105SupplyFanCommunicationLost Communications with Supply Fan has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8105 |
| lgpCondId8119CommunicationBusError The system board is experiencing an abnormal number of
communication errors. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8119 |
| lgpCondId8120ExternalBatteryCabinetRemoved One or more external battery cabinets have been removed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8120 |
| lgpCondId8125InternalBatteryBreakerOpen The internal battery breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8125 |
| lgpCondId8126AllChargersShutdown All chargers in system are shut down to avoid incompatibility in
external charger application, or to avoid over-charging in
Lithium-ion battery application. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8126 |
| lgpCondId8127SpecificChargerShutdown The charger in this power module is shut down to detect battery
connection status or to avoid Lithium-ion battery over-charging. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8127 |
| lgpCondId8166BIBBatteryBreakerPowerSupplyFailure Battery Interface Board power supply has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8166 |
| lgpCondId8170XDPumpCommunicationLost Communications with XD Pump has been lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8170 |
| lgpCondId8178EmergencyCooling Emergency Cooling. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8178 |
| lgpCondId8179BatteryManagementSystemPowerSupplyFailure The battery management system has reported a power supply failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8179 |
| lgpCondId8180SupplyFluidLowTemp [Supply Fluid Temperature] below Supply Fluid Low Temp Threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8180 |
| lgpCondId8181ReturnFluidLowTemp [Return Fluid Temperature] below Return Fluid Low Temp Threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8181 |
| lgpCondId8182FluidHighDifferentialPressure Fluid Loop High Differential Pressure (Supply - Return). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8182 |
| lgpCondId8183FluidLowDifferentialPressure Fluid Loop Low Differential Pressure (Supply - Return). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8183 |
| lgpCondId8184FluidFlowLowInletPressure Fluid Loop Flow Low Inlet Pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8184 |
| lgpCondId8185FluidFlowHighSupplyPressure Fluid Loop Flow High Supply Pressure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8185 |
| lgpCondId8186FluidLowSystemFlow Fluid Loop Low System Flow (Low total flow for units in group). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8186 |
| lgpCondId8187FluidFlowBlocked Fluid Loop Flow Blocked (Loss of Flow with High Supply Pressure). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8187 |
| lgpCondId8188FluidDewpointMarginControl Fluid Loop Dewpoint Margin Control is active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8188 |
| lgpCondId8189FluidSupplyPressureSensorIssue Fluid Loop Supply Pressure Sensor Issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8189 |
| lgpCondId8190FluidReturnPressureSensorIssue Fluid Loop Return Pressure Sensor Issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8190 |
| lgpCondId8191FluidInletPressureSensorIssue Fluid Loop Inlet Pressure Sensor Issue. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8191 |
| lgpCondId8192WaterLeakage Water Leakage - Typically indicates unit internal water leakage. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8192 |
| lgpCondId8194BatteryManagementSystemRackisOfflineWarning The Battery Management System has reported a rack-is-offline
warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8194 |
| lgpCondId8195BatteryManagementSystemGeneralWarning The Battery Management System has reported a General Warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8195 |
| lgpCondId8196BatteryManagementSystemFault The Battery Management System has reported a Fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8196 |
| lgpCondId8197BatteryManagementSystemEndOfDischargeWarning The Battery Management System has reported an End-Of-Discharge
Warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8197 |
| lgpCondId8199LoadonBypassUnion The output power is supplied by the bypass and maintenance bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8199 |
| lgpCondId8200BypassControlModuleNotAvailable The bypass control module is not available. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8200 |
| lgpCondId8201BypassModuleNotAvailable The bypass module is not available. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8201 |
| lgpCondId8208BranchOverCurrent The PDU branch current is over limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8208 |
| lgpCondId8209BranchCurrentOverHL The current of pdu branch is over the high level. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8209 |
| lgpCondId8210BranchCurrentOverLL The current of pdu branch is over the low level. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8210 |
| lgpCondId8211BranchInrushOC The instantaneous current of pdu branch is large. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8211 |
| lgpCondId8212BranchBreakerFail A failure has been detected with the branch breaker. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8212 |
| lgpCondId8227SPMInternalCommFailure The communication with Server Power Management is lost. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8227 |
| lgpCondId8228SPMCRCCheckError Server Power Management CRC Check Error. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8228 |
| lgpCondId8229SPMBoardNotReady The Server Power Management sample board is not ready. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8229 |
| lgpCondId8231PHESupTemSnsrFail Plate Heat Exchanger Supply Temperature Sensor Fail. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8231 |
| lgpCondId8253PanelboardOvervoltage The panelboard voltage crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8253 |
| lgpCondId8254PanelboardUndervoltage The panelboard voltage crossed below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8254 |
| lgpCondId8255PanelboardFrequencyDeviation The panelboard frequency deviated beyond the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8255 |
| lgpCondId8259BranchNeutralOvercurrent The neutral current crossed above the threshold of the branch. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8259 |
| lgpCondId8262PanelboardOvervoltage The Panelboard voltage crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8262 |
| lgpCondId8263PanelboardUndervoltage The panelboard voltage crossed below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8263 |
| lgpCondId8264PanelboardFrequencyDeviation The panelboard frequency deviated beyond the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8264 |
| lgpCondId8267SubfeedOvervoltage The subfeed voltage crossed above the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8267 |
| lgpCondId8268SubfeedUndervoltage The subfeed voltage crossed below the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8268 |
| lgpCondId8269SubfeedFrequencyDeviation The subfeed frequency deviated beyond the threshold. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8269 |
| lgpCondId8273BatteryTempAbnormal Battery temperature is abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8273 |
| lgpCondId8274DischargerShutdown A condition is present that prevents the Battery Discharger from
working. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8274 |
| lgpCondId8283BypassUnabletoTrace The voltage amplitude or frequency of bypass is out of the range
of trace. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8283 |
| lgpCondId8284OutputBreakerOpen UPS internal or external output breaker is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8284 |
| lgpCondId8285PowerModuleInputCurrentHigh Input current of the power module is over limit. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8285 |
| lgpCondId8286ParameterConfigurationFailed Parameter configuration failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8286 |
| lgpCondId8287OutputDisabled Output Disabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8287 |
| lgpCondId8288BatteryTerminalAbnormal Battery Terminal Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8288 |
| lgpCondId8290MOBAuxSensingFault There was a Master Output Breaker Aux Sensing Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8290 |
| lgpCondId8294SMPSInputPowerSupplyFailure Bypass Input power supply or Rectifier input power supply has
failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8294 |
| lgpCondId8295Rectifieroffduetofanpowernotavailable The Rectifier is off due to fan power not available. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8295 |
| lgpCondId8305Rectifieroverload Rectifier overload. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8305 |
| lgpCondId8306Rectifiersoftstartfailure Rectifier soft start failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8306 |
| lgpCondId8307Batterycabinetconnectionabnormal Battery cabinet connection abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8307 |
| lgpCondId8308Insufficientcapacitytostart Insufficient capacity to start. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8308 |
| lgpCondId8309Bypassdisabled Bypass disabled. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8309 |
| lgpCondId8310Auxiliarypowerfault Auxiliary power fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8310 |
| lgpCondId8311Outputoffduetoabnormalbypass Output off due to abnormal bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8311 |
| lgpCondId8312Localoutputisdisconnected Local output is disconnected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8312 |
| lgpCondId8313Outputoffvoltageisnotzero Output off voltage is not zero. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8313 |
| lgpCondId8314Paralleloutputfrequencyabnormal Parallel output frequency abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8314 |
| lgpCondId8315ManualPowerOn Manual Power On. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8315 |
| lgpCondId8316RemotePowerOn Remote Power On. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8316 |
| lgpCondId8317Batterytoutilitytransition Battery to utility transition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8317 |
| lgpCondId8318UPSwasresettofactorydefaults UPS was reset to factory defaults. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8318 |
| lgpCondId8319DeviceFaultswereclearedasrequested Device Faults were cleared, as requested. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8319 |
| lgpCondId8320Scheduledpoweronoccurred Scheduled power on occurred. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8320 |
| lgpCondId8321Scheduledpoweroffoccurred Scheduled power off occurred. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8321 |
| lgpCondId8323NeutralSCRShort The Neutral SCR is in a short condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8323 |
| lgpCondId8324NeutralSCROpen The Neutral SCR is in an open condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8324 |
| lgpCondId8325InputNeutralOverCurrent An over current has been detected on the system input neutral. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8325 |
| lgpCondId8326NeutralSnubberFail The neutral snubber has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8326 |
| lgpCondId8331BatteryCabinetSerialNumberIllegalError Serial Number of the battery cabinet is illegal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8331 |
| lgpCondId8332LithiumBatteryCabinetOnlineNumberError The online battery cabinet number is different from the cofigured
number. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8332 |
| lgpCondId8333LithiumBatteryCabinetCommunicationFailure Battery cabinet communication has been disrupted. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8333 |
| lgpCondId8334LithiumBatteryCabinetmismatchtheunit The warning is triggered when the online lithium battery cabinet
can't be used by the UPS. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8334 |
| lgpCondId8335LithiumBatteryCabinetAddressSetError Lithium battery cabinet addresses have been set incorrectly. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8335 |
| lgpCondId8336LithiumBatteryCabinetWaitCharge The battery is waiting for charge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8336 |
| lgpCondId8337NumberofLithiumBatteryCabinetsOverLimit The number of batteries connected to the system exceeds the
maximum. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8337 |
| lgpCondId8338LithiumBatteryCabinetCheck Check if the battery is present. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8338 |
| lgpCondId8339ManualLithiumBatteryWakeUpOccurred Manual lithium battery wake up occurred. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8339 |
| lgpCondId8344BatteryVoltageAbnormal Battery voltage out-of-range in the online lithium battery cabinet. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8344 |
| lgpCondId8345BatteryTemperatureAbnormal Battery Temperature out-of-range of the online Lithium Battery
Cabinet. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8345 |
| lgpCondId8346BatteryCurrentAbnormal Battery current out-of-range of the online lithium battery cabinet. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8346 |
| lgpCondId8347BatteryCabinetAddressFault Battery Cabinet Addresses are set incorrectly. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8347 |
| lgpCondId8348BatteryCabinetConnectFault Battery cabinet ports have reversed connections. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8348 |
| lgpCondId8349BatteryCabinetCommunicationFail Battery Cabinet Cable failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8349 |
| lgpCondId8362Turnonfailed Turn on failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8362 |
| lgpCondId8368SystemoutputInhibitExt System output is inhibited by an external signal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8368 |
| lgpCondId8397BatteryCabinetOverTemperature Battery Cabinet Over Temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8397 |
| lgpCondId8398BatteryStringOpen Battery String Open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8398 |
| lgpCondId8399BatterySystemAbnormal Battery System Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8399 |
| lgpCondId8404AirFilterDifferentialPressureSensorFailure Air Filter Differential Pressure Sensor Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8404 |
| lgpCondId8405SupplyAirVolumeSensorCommunicationFailure Supply Air Volume Sensor Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8405 |
| lgpCondId8407CompressorinAlarmCondition Compressor in Alarm Condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8407 |
| lgpCondId8410FanCommunicationFailure Fan Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8410 |
| lgpCondId8412CondensatePressureSensorAlarm Condensate Pressure Sensor Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8412 |
| lgpCondId8421MotorizedBallValveFailure Motorized Ball Valve Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8421 |
| lgpCondId8422AisleStaticPressureSensorFailure Aisle static pressure sensor failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8422 |
| lgpCondId8423BPHECommunicationFailure Brazed Plate Heat Exchanger Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8423 |
| lgpCondId8424DataCollectorCommunicationFailure Data Collector Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8424 |
| lgpCondId8425EPIVFailure Electronic Pressure Independent Control Valve Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8425 |
| lgpCondId8426ATSCommunicationFailure ATS Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8426 |
| lgpCondId8427APFCommunicationFailure Active Power Filter Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8427 |
| lgpCondId8429BatterySystemCommunicationAbnormal Battery System Communication Abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8429 |
| lgpCondId8430BatterySystemWarning Battery System Warning. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8430 |
| lgpCondId8431BatterySystemFault Battery System Fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8431 |
| lgpCondId8435PanelboardMainBreakerOpenFail The main panelboard circuit breaker failed to open when tripped. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8435 |
| lgpCondId8436LoadLossDetected Load loss detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8436 |
| lgpCondId8438BatteryCabinetParallelFailure Battery Cabinet Parallel failure of the online lithium battery
cabinet. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8438 |
| lgpCondId8439BatteryCabinetSOHLow Battery cabinet state of health is low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8439 |
| lgpCondId8446ShutdownDueToSystemInputBackfeedFault UPS will shutdown due to a system input backfeed fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8446 |
| lgpCondId8447InputNeutralGroundAbnormal Input neutral ground abnormal. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8447 |
| lgpCondId8448BypassAbnormalInECOMode UPS will return to inverter from bypass due to ECO Mode bypass
abnormal condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8448 |
| lgpCondId8449ShutdownDueToBypassOvercurrentTimeout UPS will shutdown due to bypass overcurrent. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8449 |
| lgpCondId8450ShutdownDueToBypassBackfeedFault UPS will shutdown due to a bypass backfeed fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8450 |
| lgpCondId8451ECOBypassMode ECO Mode Operation. Unit is On Bypass. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8451 |
| lgpCondId8452ParallelBypassCableConnectionAbnormal Parallel bypass cable wiring error. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8452 |
| lgpCondId8454FanReplacementRequired Fan replacement required. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8454 |
| lgpCondId8455LoadOffDueToShutdownOnBattery Load Off Due To Shutdown On Battery. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8455 |
| lgpCondId8456SystemRedundantOverload System loss of redundancy. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8456 |
| lgpCondId8457DSPFaultCondition DSP Fault Condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8457 |
| lgpCondId8458OnIntelligentSleepMode Unit in intelligent sleep mode operation. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8458 |
| lgpCondId8459FanReplaced Fan has been replaced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8459 |
| lgpCondId8461THCardAlarm TH Card Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8461 |
| lgpCondId8462CompressorLimitingAlarm Compressor Limiting Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8462 |
| lgpCondId8463OutdoorFanCommunicationFailure Outdoor Fan Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8463 |
| lgpCondId8464OutdoorFanDriverFailure Outdoor Fan Driver Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8464 |
| lgpCondId8467ProductRunOverTimeAlarm Product Run Over Time Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8467 |
| lgpCondId8468EnergyMeterCommunicationFailure Energy Meter Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8468 |
| lgpCondId8469ATSFailure ATS Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8469 |
| lgpCondId8470SMSStopInverterInhibit When active a single inverter stop cannot be initiated. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8470 |
| lgpCondId8471UnitInSpecialCapacityMode When active in a MMS, the system will always be in capacity
condition, regardless of actual load. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8471 |
| lgpCondId8472RectifierOvercurrentWarning The rectifier stopped for overcurrent. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8472 |
| lgpCondId8474IncompatibleBatteryManagementSystemversion The Battery Management System software version is incompatible. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8474 |
| lgpCondId8475LithiumBatteryEOL Lithium battery is at the end of its life. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8475 |
| lgpCondId8476LithiumBatterySamplingCircuitFailure Lithium battery has sampling circuit failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8476 |
| lgpCondId8477LithiumBatteryHardwareCircuitProtectionActive Lithium battery has activated hardware circuit protection. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8477 |
| lgpCondId8478LithiumBatteryCellCapacityLow Lithium battery cell capacity is very low. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8478 |
| lgpCondId8479LithiumBatteryCableConnectionIssue Check the Lithium Battery cable connections. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8479 |
| lgpCondId8480DischargeableBatteryCountLessThanConfiguredNumber The number of connected battery cabinets is less than the
configured number. Prevent Discharge. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8480 |
| lgpCondId8481Ambienttemperaturelowerthanrecommended The ambient temperature is lower than the lower limit of the
recommended temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8481 |
| lgpCondId8482Ambienttemperaturehigherthanrecommended The ambient temperature is higher than the upper limit of the
recommended temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8482 |
| lgpCondId8483Ambienttemperaturelowprealarm The ambient temperature is close to the lower limit of the
operating temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8483 |
| lgpCondId8484Ambienttemperaturehighprealarm The ambient temperature is close to the upper limit of the
operating temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8484 |
| lgpCondId8489SystemBypassPhaseRotationError The power conductors on the input line are not wired to the UPS in
the sequence preferred for the bypass (A-B-C). | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8489 |
| lgpCondId8494SystemControlCardNotReady System control card is not ready. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8494 |
| lgpCondId8495SystemControlCardPowerSupplyFailure System control card power supply failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8495 |
| lgpCondId8496SystemControlCardCommunicationFail System control card communication fail. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8496 |
| lgpCondId8501BypassModuleNotReady Bypass Module is not ready. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8501 |
| lgpCondId8502BypassModulePowerSupplyFailure Bypass module power supply failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8502 |
| lgpCondId8503BypassModuleCommunicationFault The bypass module communication failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8503 |
| lgpCondId8504BypassModuleOverTemperature The Bypass Module has detected an over temperature condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8504 |
| lgpCondId8505BypassModuleFanFault The Bypass Module has detected a fan fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8505 |
| lgpCondId8510DischargerFailure Discharger failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8510 |
| lgpCondId8512PowerModuleNotReady Power module not ready. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8512 |
| lgpCondId8517BatteryCircuitBreaker9Open Battery circuit breaker 9 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8517 |
| lgpCondId8518BatteryCircuitBreaker10Open Battery circuit breaker 10 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8518 |
| lgpCondId8519BatteryCircuitBreaker11Open Battery circuit breaker 11 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8519 |
| lgpCondId8520BatteryCircuitBreaker12Open Battery circuit breaker 12 is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8520 |
| lgpCondId8521BatteryBreaker9OpenFailure Battery circuit breaker 9 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8521 |
| lgpCondId8522BatteryBreaker10OpenFailure Battery circuit breaker 10 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8522 |
| lgpCondId8523BatteryBreaker11OpenFailure Battery circuit breaker 11 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8523 |
| lgpCondId8524BatteryBreaker12OpenFailure Battery circuit breaker 12 failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8524 |
| lgpCondId8537BatteryCabinetHighOverallVoltage The system has detected a high battery cabinet overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8537 |
| lgpCondId8538BatteryCabinetLowOverallVoltage The system has detected a low battery cabinet overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8538 |
| lgpCondId8539BatteryCabinetHighCellVoltage The system has detected a high cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8539 |
| lgpCondId8540BatteryCabinetLowCellVoltage The system has detected a low cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8540 |
| lgpCondId8541BatteryCabinetOverOverallVoltage The system has detected a battery cabinet over overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8541 |
| lgpCondId8542BatteryCabinetUnderOverallVoltage The system has detected a battery cabinet under overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8542 |
| lgpCondId8543BatteryCabinetOverCellVoltage The system has detected a battery cabinet over cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8543 |
| lgpCondId8544BatteryCabinetUnderCellVoltage The system has detected a battery cabinet under cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8544 |
| lgpCondId8545BatteryCabinetChargeOverCurrent Battery Cabinet Charge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8545 |
| lgpCondId8546BatteryCabinetDischargeOverCurrent Battery Cabinet Discharge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8546 |
| lgpCondId8547BatteryCabinetOverTemperature The system has detected a battery cabinet over temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8547 |
| lgpCondId8548BatteryCabinetUnderTemperature The system has detected a battery cabinet under temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8548 |
| lgpCondId8558BatteryStringHighCellVoltage The system has detected a high cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8558 |
| lgpCondId8559BatteryStringLowCellVoltage The system has detected a low cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8559 |
| lgpCondId8560BatteryStringOverOverallVoltage The system has detected a battery string over overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8560 |
| lgpCondId8561BatteryStringUnderOverallVoltage The system has detected a battery string under overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8561 |
| lgpCondId8562BatteryStringOverCellVoltage The system has detected a battery string over cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8562 |
| lgpCondId8563BatteryStringUnderCellVoltage The system has detected a battery string under cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8563 |
| lgpCondId8564BatteryStringChargeOverCurrent Battery string Charge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8564 |
| lgpCondId8565BatteryStringDischargeOverCurrent Battery string Discharge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8565 |
| lgpCondId8566BatteryStringOverTemperature The system has detected a battery string over temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8566 |
| lgpCondId8567BatteryStringUnderTemperature The system has detected a battery string under temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8567 |
| lgpCondId8579BatteryModuleHighOverallVoltage The system has detected a high battery module overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8579 |
| lgpCondId8580BatteryModuleLowOverallVoltage The system has detected a low battery module overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8580 |
| lgpCondId8581BatteryModuleHighCellVoltage The system has detected a high cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8581 |
| lgpCondId8582BatteryModuleLowCellVoltage The system has detected a low cell voltage condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8582 |
| lgpCondId8583BatteryModuleOverOverallVoltage The system has detected a battery module over overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8583 |
| lgpCondId8584BatteryModuleUnderOverallVoltage The system has detected a battery module under overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8584 |
| lgpCondId8585BatteryModuleOverCellVoltage The system has detected a battery module over cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8585 |
| lgpCondId8586BatteryModuleUnderCellVoltage The system has detected a battery module under cell voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8586 |
| lgpCondId8587BatteryModuleDisconnected Battery Module is disconnected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8587 |
| lgpCondId8588BatteryModuleChargeOverCurrent Battery Module Charge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8588 |
| lgpCondId8589BatteryModuleDischargeOverCurrent Battery Module Discharge over current. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8589 |
| lgpCondId8590BatteryModuleOverTemperature The system has detected a battery module over temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8590 |
| lgpCondId8591BatteryModuleUnderTemperature The system has detected a battery module under temperature
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8591 |
| lgpCondId8592BatteryModuleFault Battery module fault. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8592 |
| lgpCondId8605BatteryStringHighOverallVoltage The system has detected a high battery string overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8605 |
| lgpCondId8606BatteryStringLowOverallVoltage The system has detected a low battery string overall voltage
condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8606 |
| lgpCondId8608BypassSCROpen The bypass SCR is in an open circuit condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8608 |
| lgpCondId8609BypassSCRShort The bypass SCR is in short circuit condition. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8609 |
| lgpCondId8612RectifierOverTemperature Rectifier temperature is too high to keep rectifier running. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8612 |
| lgpCondId8613RectifierCommunicationsFailure Communication between internal monitor and Rectifier has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8613 |
| lgpCondId8615InverterOverTemperature Inverter temperature is too high to keep inverter running. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8615 |
| lgpCondId8616InverterCommunicationsFailure Communication between internal monitor and Inverter has failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8616 |
| lgpCondId8617UPSisinServiceMode UPS is in Service Mode. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8617 |
| lgpCondId8619AirEconHighMixedTemp Air Economizer High Mixed Temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8619 |
| lgpCondId8620AirEconLowMixedTemp Air Economizer Low Mixed Temperature. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8620 |
| lgpCondId8621RetDampFdbackFail Return Damper Feedback Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8621 |
| lgpCondId8622OutdoorDmpFdbackFail Outdoor Damper Feedback Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8622 |
| lgpCondId8623ThermalRunaway Thermal Runaway. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8623 |
| lgpCondId8624XDMMixValvePositionError XDM Mix Valve is reporting Out of Position. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8624 |
| lgpCondId8625XDMPumpNoFlow XDM Pump Indicates No Flow. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8625 |
| lgpCondId8626XDMPumpPressureSensorFail XDM Pump Pressure Sensor Has Failed. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8626 |
| lgpCondId8627XDMPumpNotAvail XDM Pump is Not Available. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8627 |
| lgpCondId8628XDMFlowandLoadCycling XDM Flow is Cycling Between Flow and Load. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8628 |
| lgpCondId8629ShuntTripUnavailable Shunt trip power has failed. The voltage is insufficient to shunt
trip the input breaker. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8629 |
| lgpCondId8630PanelboardShuntTripUnavailable Shunt trip power has failed. The voltage is insufficient to shunt
trip the panelboard main breaker. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8630 |
| lgpCondId8718SystemControlCardsMissing System control cards missing. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8718 |
| lgpCondId8719LossofControlRedundancy Loss of control redundancy. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8719 |
| lgpCondId8724BatteryModuleNotReady Battery module is not ready. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8724 |
| lgpCondId8725BatteryModuleBalancingAbnormal Battery module voltage is not balanced. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8725 |
| lgpCondId8726MainBatteryCircuitBreakerisOpen Main battery circuit is open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8726 |
| lgpCondId8727MainBatteryBreakerOpenFailure Main battery circuit breaker failed to open. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8727 |
| lgpCondId8734ExhaustDamperFeedbackFail Exhaust Damper Feedback Failure Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8734 |
| lgpCondId8735HighUnitDifferentialPressure High Unit Differential Pressure Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8735 |
| lgpCondId8736InputSurgeProtectionDeviceAlarm Input Surge Protection Device alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8736 |
| lgpCondId8737BypassSurgeProtectionDeviceAlarm Bypass Surge Protection Device alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8737 |
| lgpCondId8738ReturnTHSensorFailure Return Temperature/Humidity Sensor Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8738 |
| lgpCondId8742AggregateRemoteAirTempSensorFail Failure of Aggregated Remote Air Temperature Sensor. This event is
active when all configured Remote Sensor Issue events are active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8742 |
| lgpCondId8743AggregateMixedAirTempSensorFail Failure of Aggregated Mixed Air Temperature Sensor. This event is
active when Remote Sensor Issue and External Air Sensor E Issue
are active. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8743 |
| lgpCondId8745FixedCompressorFailure Fixed Compressor Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8745 |
| lgpCondId8746FixedCompressorFailureLock Fixed Compressor Failure Lock. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8746 |
| lgpCondId8748SecondaryPowerSourceSupplyFailure Secondary Power Source Supply Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8748 |
| lgpCondId8751SprayCommunicationFailure Spray Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8751 |
| lgpCondId8752SprayHighPressureFailure Spray High Pressure Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8752 |
| lgpCondId8753SprayHighPressureFailureLock Spray High Pressure Failure Lock. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8753 |
| lgpCondId8754SprayLowPressureFailure Spray Low Pressure Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8754 |
| lgpCondId8755SprayAntifreezeMaintenance Spray Antifreeze Maintenance. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8755 |
| lgpCondId8756PowerMeterCommunicationFailure Power Meter Communication Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8756 |
| lgpCondId8757WetFilmMaintenanceAlarm Wet Film Maintenance Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8757 |
| lgpCondId8758LowRefrigerant Low Refrigerant. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8758 |
| lgpCondId8759RefrigerantLeakDetected Refrigerant Leak Detected. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8759 |
| lgpCondId8760RefrigerantLeakDetectorCommunicationsFailure Refrigerant Leak Detector Communications Failure. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8760 |
| lgpCondId8761RefrigerantLeakDetectLock Refrigerant Leak Detect Lock. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8761 |
| lgpCondId8762HighPressureSwitchAlarm High Pressure Switch Alarm. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8762 |
| lgpCondId8763HighPressureSwitchAlarmLock High Pressure Switch Alarm Lock. | node | - | .1.3.6.1.4.1.476.1.42.3.2.7.1.8763 |