igmpSnoopNewCfgVlanClear
LENOVO-GbTOR-G8264-MIB ·
.1.3.6.1.4.1.26543.2.7.6.3.1.19.9.15
Object
scalar
r/w
Enumeration
Removing ALL Snooping Vlans.
Context
- MIB
- LENOVO-GbTOR-G8264-MIB
- OID
.1.3.6.1.4.1.26543.2.7.6.3.1.19.9.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- igmpSnoopCfg
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | clear |
2 | ok |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igmpSnoopNewCfgAggrEnaDis Enable/Disable of IGMP Report aggregation. | scalar | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.10 |
| igmpSnoopCurCfgEnaDis The current status of IGMP Snooping. | scalar | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.11 |
| igmpSnoopNewCfgEnaDis Set Enable/Disable of IGMP Snooping. | scalar | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.12 |
| igmpSnoopNewCfgVlanAdd The VLAN to be added to snooping vlan list. When read,
0 is returned. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.13 |
| igmpSnoopNewCfgVlanRem The VLAN to be removed from snooping vlan list. When read,
0 is returned. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.14 |
| igmpSnoopCurCfgVlanBmap The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xx… | scalar | OctetString | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.16 |
| igmpSnoopNewCfgVlanBmap The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xx… | scalar | OctetString | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.17 |
| igmpSnoopCurCfgSrcIp The source ip for GSQ proxy in current config. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.26 |
| igmpSnoopNewCfgSrcIp The source ip for GSQ proxy in new config. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.27 |
| igmpSnoopSetToDefault When setting the value setDefault(2), the IGMP Snooping configuration
is set to the default values. When reading, none(1) is always
returned. | scalar | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.33 |
| igmpSnoopCurCfgMrto The value of multicast router timeout in the current config. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.7 |
| igmpSnoopNewCfgMrto The value of multicast router timeout in the new config. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.8 |
| igmpSnoopCurCfgAggrEnaDis Enable/Disable of IGMP Report aggregation. | scalar | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.9.9 |