igmpNewQurCfgVlanIndex
LENOVO-GbTOR-G8264-MIB ·
.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.1
Object
column
Integer32
The vlan number for which the IGMP querier information is related.
Context
- MIB
- LENOVO-GbTOR-G8264-MIB
- OID
.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- igmpNewQurCfgEntry
- Table
- igmpNewQurCfgTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igmpNewCfgQurMaxRespTime The maximum query response interval advertised in
IGMP queries on this VLAN. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.10 |
| igmpNewCfgOtherQurAddress The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan. | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.11 |
| igmpNewCfgOtherQurPresentInt The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This … | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.12 |
| igmpNewCfgVlanOperVersion Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOpe… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.13 |
| igmpNewVlanOperVersion Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3). | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.14 |
| igmpNewVlanOlderVerTimer Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.15 |
| igmpNewCfgQuerierDefault Action to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.16 |
| igmpNewQuerierState Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the … | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.2 |
| igmpNewCfgQuerier The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.3 |
| igmpNewCfgQueryInterval This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.4 |
| igmpNewCfgQurSrcIp The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.5 |
| igmpNewCfgElectionType The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. … | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.6 |
| igmpNewCfgQurRobustness The Robustness Variable allows tuning for the Other
Querier Present Interval. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.7 |
| igmpNewCfgQurStartupCnt Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.8 |
| igmpNewCfgQurStartupInt This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.9 |