igmpNewCfgElectionType

LENOVO-GbTOR-G8264-MIB · .1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.6
MIB view Table view

Object

column r/w Enumeration 
The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address.

Context

MIB
LENOVO-GbTOR-G8264-MIB
OID
.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.6
Type
column
Access
readwrite
Status
current
Parent
igmpNewQurCfgEntry
Table
igmpNewQurCfgTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ipv4
2macaddr

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
igmpNewQurCfgVlanIndex
The vlan number for which the IGMP querier information is related.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.1
igmpNewCfgQurMaxRespTime
The maximum query response interval advertised in IGMP queries on this VLAN.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.10
igmpNewCfgOtherQurAddress
The IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan.
columnOctetString.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.11
igmpNewCfgOtherQurPresentInt
The Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be the querier. This …
columnOctetString.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.12
igmpNewCfgVlanOperVersion
Indicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOpe…
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.13
igmpNewVlanOperVersion
Indicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.14
igmpNewVlanOlderVerTimer
Indicates the remaining time of lowest operating version of the vlan. For interoperability with multicast routers/switches/Hosts, running older versions of IGMP, systems maintain…
columnOctetString.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.15
igmpNewCfgQuerierDefault
Action to set the default IGMP Querier settings on a Vlan. Returns other(1) when read.
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.16
igmpNewQuerierState
Indicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the switch receives the …
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.2
igmpNewCfgQuerier
The snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query messages. The query…
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.3
igmpNewCfgQueryInterval
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.4
igmpNewCfgQurSrcIp
The source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.5
igmpNewCfgQurRobustness
The Robustness Variable allows tuning for the Other Querier Present Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.7
igmpNewCfgQurStartupCnt
Represents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.8
igmpNewCfgQurStartupInt
This variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.16.1.9