igmpCurVlanOlderVerTimer

LENOVO-GbTOR-G8264-MIB · .1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.15
MIB view Table view

Object

column OctetString 
Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older 
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times 
(the Query Interval)) plus (one Query Response Interval).

Context

MIB
LENOVO-GbTOR-G8264-MIB
OID
.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.15
Type
column
Access
readonly
Status
current
Parent
igmpCurQurCfgEntry
Table
igmpCurQurCfgTable
Siblings
14

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-128

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
igmpCurQurCfgVlanIndex
The vlan number for which the IGMP querier information is related.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.1
igmpCurCfgQurMaxRespTime
The maximum query response interval advertised in IGMP queries on this VLAN.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.10
igmpCurCfgOtherQurAddress
The IP/MAC Address of the Querier, which has won the Querier election, when bosSnoopVlanCfgQuerier is enabled on this vlan.
columnOctetString.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.11
igmpCurCfgOtherQurPresentInt
The Other Querier Present Interval is the length of time that must pass before switch decides that there is no longer another multicast router which should be the querier. This …
columnOctetString.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.12
igmpCurCfgVlanOperVersion
Indicates the operating version of the IGMP snooping switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOper…
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.13
igmpCurVlanOperVersion
Indicates the operating version of the IGMP snooping switch for specific VLAN. The default operating mode on a specific VLAN IGMP version 3 i.e, V3(3).
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.14
igmpCurQuerierState
Indicates whether the switch is running as a querier in the VLAN. Based on the querier election, if elected as a querier, it will send query messages. If the switch receives the …
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.2
igmpCurCfgQuerier
The snooping switch can be configured to send IGMP queries. querier are not present in the VLAN and it set to 'enabled' the switch will generate general query messages. The query…
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.3
igmpCurCfgQueryInterval
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.4
igmpCurCfgQurSrcIp
The source ip for GSQ proxy in this vlan. This Src Ip will be used in querier election mechanism. It will be the source address in queries sent bye the switch.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.5
igmpCurCfgElectionType
The querier selection type specify the criteria to be used to elect querier for this VLAN. When a switch is configured as a querier, this will define the election criteria . e.g. …
columnEnumeration.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.6
igmpCurCfgQurRobustness
The Robustness Variable allows tuning for the Other Querier Present Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.7
igmpCurCfgQurStartupCnt
Represents the number of Queries sent out on startup of querier election, separated by the Startup Query Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.8
igmpCurCfgQurStartupInt
This variable represents the interval(in seconds) between General Queries sent by a Querier on startup. By default: 1/4 the Query Interval.
columnInteger32.1.3.6.1.4.1.26543.2.7.6.3.1.19.15.1.9