agPortNewCfgLinkTrap
LENOVO-GbTOR-G8264-MIB ·
.1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.16
Object
column
r/w
Enumeration
Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.
Context
- MIB
- LENOVO-GbTOR-G8264-MIB
- OID
.1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agPortNewCfgTableEntry
- Table
- agPortNewCfgTable
- Siblings
- 47
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agPortNewCfgIndx The index of the row in port configurations table. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.1 |
| agPortNewCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.11 |
| agPortNewCfgGigEthFctl This object is used to select port flow control for
gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.12 |
| agPortNewCfgPortName The switch port name. | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.13 |
| agPortNewCfgState This is the state of the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.2 |
| agPortNewCfgGigEthSpeed Selects the port speed for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.21 |
| agPortNewCfgGigEthMode This object is used to select port mode for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.22 |
| agPortNewCfgDscpRemarking Enable or disable Dscp remarking for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.23 |
| agPortNewCfgTagPVID This is PVID tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.25 |
| agPortNewCfgLearning Enable or disable L2 (FDB) Learning for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.26 |
| agPortNewCfgFloodBlocking Enable or disable flood blocking for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.27 |
| agPortNewCfgType The switch port type. | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.29 |
| agPortNewCfgVlanTag This is VLAN tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.3 |
| agPortNewCfgLinkType The type of port connection. (for PVRST only) | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.30 |
| agPortNewCfgEdge The state of port edge. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.31 |
| agPortNewCfgTagiSkip Enable/disable skipping ingress VLAN tag enforcement. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.32 |
| agPortNewCfgTageSkip Enable/disable skipping egress VLAN tag enforcement. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.33 |
| agPortNewCfgErrDisableRecovery This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-di… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.35 |
| agPortNewCfgUdld Enable or disable UDLD for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.37 |
| agPortNewCfgUdldMode Enable or disable UDLD mode for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.38 |
| agPortNewCfgOam Enable or disable OAM Discovery process for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.39 |
| agPortNewCfgOamMode Enable or disable OAM mode for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.40 |
| agPortNewCfgBpduGuard Enable or disable BPDU guard for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.41 |
| agPortNewCfgMulticastThreshold New status of the port's Multicast Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.42 |
| agPortNewCfgMulticastThresholdRate New port's Multicast Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.43 |
| agPortNewCfgBroadcastThreshold New status of the port's Broadcast Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.44 |
| agPortNewCfgBroadcastThresholdRate New port's Broadcast Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.45 |
| agPortNewCfgDLFThreshold New status of the port's Destination Lookup Fail Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.46 |
| agPortNewCfgDLFThresholdRate New port's Destination Lookup Fail Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.47 |
| agPortNewCfgMacAddrNotif Enables or Disables the MAC address notification
syslog messages on the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.48 |
| agPortNewCfgTagiPVID This is ingress PVID tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.49 |
| agPortNewCfgRmon This object is used to turn RMON on or off on the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.5 |
| agPortNewCfgStpExtGuard Set spanning tree guard type | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.52 |
| agPortNewCfgLFDStatus This object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
D… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.53 |
| agPortNewCfgEvbProfId Set EVB Profile ID | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.56 |
| agPortNewCfgReflectRelay Enable/disable reflective relay for port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.59 |
| agPortNewCfgPVID The default VLAN ID for the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.6 |
| agPortNewCfgUcBw Set port unicast bandwidth | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.60 |
| agPortNewCfgPrivateVlanStatus Enable or disable the Private VLAN on this port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.61 |
| agPortNewCfgMappedPrimaryVlans Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
||… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.62 |
| agPortNewCfgAddPrimaryVlan Adds the port to the specified primary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.63 |
| agPortNewCfgDelPrimaryVlan Removes the port from the specified primary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.64 |
| agPortNewCfgAssociatedSecondaryVlans Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.65 |
| agPortNewCfgAddSecondaryVlan Adds the port to the specified secondary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.66 |
| agPortNewCfgDelSecondaryVlan Removes the port from the secondary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.67 |
| agPortNewCfgPortAlias The port alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.68 |
| agPortNewCfgSpeed1G Limit the port to 1G speed | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.69 |