agPortNewCfgAddSecondaryVlan
LENOVO-GbTOR-G8264-MIB ·
.1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.66
Object
Adds the port to the specified secondary VLAN. A '0' value is returned when read.
Context
- MIB
- LENOVO-GbTOR-G8264-MIB
- OID
.1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.66- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agPortNewCfgTableEntry
- Table
- agPortNewCfgTable
- Siblings
- 47
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agPortNewCfgIndx The index of the row in port configurations table. | column | PortNumber | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.1 |
| agPortNewCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.11 |
| agPortNewCfgGigEthFctl This object is used to select port flow control for
gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.12 |
| agPortNewCfgPortName The switch port name. | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.13 |
| agPortNewCfgLinkTrap Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.16 |
| agPortNewCfgState This is the state of the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.2 |
| agPortNewCfgGigEthSpeed Selects the port speed for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.21 |
| agPortNewCfgGigEthMode This object is used to select port mode for Gigabit Ethernet connection. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.22 |
| agPortNewCfgDscpRemarking Enable or disable Dscp remarking for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.23 |
| agPortNewCfgTagPVID This is PVID tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.25 |
| agPortNewCfgLearning Enable or disable L2 (FDB) Learning for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.26 |
| agPortNewCfgFloodBlocking Enable or disable flood blocking for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.27 |
| agPortNewCfgType The switch port type. | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.29 |
| agPortNewCfgVlanTag This is VLAN tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.3 |
| agPortNewCfgLinkType The type of port connection. (for PVRST only) | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.30 |
| agPortNewCfgEdge The state of port edge. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.31 |
| agPortNewCfgTagiSkip Enable/disable skipping ingress VLAN tag enforcement. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.32 |
| agPortNewCfgTageSkip Enable/disable skipping egress VLAN tag enforcement. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.33 |
| agPortNewCfgErrDisableRecovery This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-di… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.35 |
| agPortNewCfgUdld Enable or disable UDLD for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.37 |
| agPortNewCfgUdldMode Enable or disable UDLD mode for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.38 |
| agPortNewCfgOam Enable or disable OAM Discovery process for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.39 |
| agPortNewCfgOamMode Enable or disable OAM mode for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.40 |
| agPortNewCfgBpduGuard Enable or disable BPDU guard for the switch port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.41 |
| agPortNewCfgMulticastThreshold New status of the port's Multicast Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.42 |
| agPortNewCfgMulticastThresholdRate New port's Multicast Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.43 |
| agPortNewCfgBroadcastThreshold New status of the port's Broadcast Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.44 |
| agPortNewCfgBroadcastThresholdRate New port's Broadcast Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.45 |
| agPortNewCfgDLFThreshold New status of the port's Destination Lookup Fail Threshold. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.46 |
| agPortNewCfgDLFThresholdRate New port's Destination Lookup Fail Threshold Rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.47 |
| agPortNewCfgMacAddrNotif Enables or Disables the MAC address notification
syslog messages on the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.48 |
| agPortNewCfgTagiPVID This is ingress PVID tag state of the port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.49 |
| agPortNewCfgRmon This object is used to turn RMON on or off on the port. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.5 |
| agPortNewCfgStpExtGuard Set spanning tree guard type | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.52 |
| agPortNewCfgLFDStatus This object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
D… | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.53 |
| agPortNewCfgEvbProfId Set EVB Profile ID | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.56 |
| agPortNewCfgReflectRelay Enable/disable reflective relay for port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.59 |
| agPortNewCfgPVID The default VLAN ID for the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.6 |
| agPortNewCfgUcBw Set port unicast bandwidth | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.60 |
| agPortNewCfgPrivateVlanStatus Enable or disable the Private VLAN on this port | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.61 |
| agPortNewCfgMappedPrimaryVlans Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
||… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.62 |
| agPortNewCfgAddPrimaryVlan Adds the port to the specified primary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.63 |
| agPortNewCfgDelPrimaryVlan Removes the port from the specified primary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.64 |
| agPortNewCfgAssociatedSecondaryVlans Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.65 |
| agPortNewCfgDelSecondaryVlan Removes the port from the secondary VLAN. A '0' value is
returned when read. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.67 |
| agPortNewCfgPortAlias The port alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.68 |
| agPortNewCfgSpeed1G Limit the port to 1G speed | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.1.1.2.3.1.69 |