acl6CurCfgTos
LENOVO-GbTOR-G8264-MIB ·
.1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.22
Object
column
Enumeration
To enable/disable setting pkts based on TOS bits.
Context
- MIB
- LENOVO-GbTOR-G8264-MIB
- OID
.1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- acl6CurCfgEntry
- Table
- acl6CurCfgTable
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acl6CurCfgIndex The index associated with this ACL6 entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.1 |
| acl6CurCfgIPv6TrafficClass The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.10 |
| acl6CurCfgIPv6NextHeader The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.11 |
| acl6CurCfgSrcPort The source TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.12 |
| acl6CurCfgSrcPortMask The mask applied to acl6CurCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.13 |
| acl6CurCfgDstPort The destination TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.14 |
| acl6CurCfgDstPortMask The mask applied to acl6CurCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.15 |
| acl6CurCfgTCPFlags The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.16 |
| acl6CurCfgTCPFlagsMask The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.17 |
| acl6CurCfgEgressPortIndexes The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.18 |
| acl6CurCfgStatistics Whether statistics collection for this ACL6 is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.19 |
| acl6CurCfgGroup The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.2 |
| acl6CurCfgUser Set user defined priority for this ACL6. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.20 |
| acl6CurCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.21 |
| acl6CurCfgUserEnable Set update method for this ACL6. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.24 |
| acl6CurCfgInprofDscpEnable Whether in profile update DSCP for this ACL6 is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.25 |
| acl6CurCfgLog Whether log for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.26 |
| acl6CurCfgMeterAction Meter Action for this ACL. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.28 |
| acl6CurCfgMeterEnable Meter state for this ACL. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.29 |
| acl6CurCfgFilterAction The action to be performed on a packet that matches the filter
settings of this ACL6 entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.3 |
| acl6CurCfgKbitsSec The commited rate of meter associated with this ACL entry. | column | Unsigned32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.30 |
| acl6CurCfgKbitsBurst The maxmium burst sizeof meter associated with this ACL entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.31 |
| acl6CurCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.32 |
| acl6CurCfgOutprofDscpEnable Whether out profile update DSCP for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.33 |
| acl6CurCfgEgressPortAliases The port alias in the ACL6 configured for egress filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.34 |
| acl6CurCfgFilterActionSetPrio The value to be used when the action to be performed is setprio
for this ACL6 entry. | column | Enumeration | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.4 |
| acl6CurCfgSrcIPv6Address The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xx… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.5 |
| acl6CurCfgSrcIPv6PrefixLen The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.6 |
| acl6CurCfgDstIPv6Address The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xx… | column | OctetString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.7 |
| acl6CurCfgDstIPv6PrefixLen The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. | column | Integer32 | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.8 |
| acl6CurCfgIPv6FlowLabel The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.26543.2.7.6.9.1.5.1.1.9 |