lcsPVLANMembers

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.19.1.1.3
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
PVLAN Members. Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port.  Thus, each port
of the bridge is represented by a single bit within the
value of this object.  If that bit has a value of '1',
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.19.1.1.3
Type
column
Access
readwrite
Status
current
Parent
lcsPVLANMembershipEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LCOS-SX-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LCOS-SX-MIB::lcsPVLANMembers'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LCOS-SX-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LCOS-SX-MIB::lcsPVLANMembers.<lcsUDLDNeighbourPort>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LCOS-SX-MIB' -M '/opt/observium/mibs/lancom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LCOS-SX-MIB::lcsPVLANMembers'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255