juniBgpVrfUnconfiguredAttributes

Juniper-BGP-MIB · .1.3.6.1.4.1.4874.2.2.29.1.18.1.13
MIB view Table view

Object

column r/w Bits 
On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
   0 = The attribute is configured (i.e. the configured value is the
       operational value).
   1 = The attribute is unconfigured (i.e. the operational value is
       inherited from the a higher level which could be the default
       value).
              
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
              
On write each bit indicates whether or not the corresponding attribute
should be set to the unconfigured state:
   0 = No operation (i.e. do not change the state of the attribute).
   1 = Set the attribute to the unconfigured state.
              
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.

Context

MIB
Juniper-BGP-MIB
OID
.1.3.6.1.4.1.4874.2.2.29.1.18.1.13
Type
column
Access
readwrite
Status
current
Parent
juniBgpVrfEntry
Table
juniBgpVrfTable
Siblings
14

Syntax

Bits

Values & Constraints

Enumerated Values
0juniBgpVrfSynchronization
1juniBgpVrfAutoSummary
2juniBgpVrfExternalDistance
3juniBgpVrfInternalDistance
4juniBgpVrfLocalDistance
5juniBgpVrfAddUnicastRoutesToMulticastView
6juniBgpVrfMaximumPathsEbgp
7juniBgpVrfMaximumPathsIbgp
8juniBgpVrfMaximumPathsEIbgp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniBgpVrfName
The name of the VPN Routing Forwarding (VRF) instance.
columnJuniper-TCJuniVrfName.1.3.6.1.4.1.4874.2.2.29.1.18.1.1
juniBgpVrfAddUnicastRoutesToMulticastView
Set this object to true(1) in order to add routes learnt by IPv4 Unicast BGP to the multicast route table.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.10
juniBgpVrfMaximumPathsEbgp
The maximum number of routes received from EBGP peers which BGP can select as equal cost. Zero means that routes from EBGP peers cannot be selected as equal cost.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.11
juniBgpVrfMaximumPathsIbgp
The maximum number of routes received from IBGP peers which BGP can select as equal cost. Zero means that routes from IBGP peers cannot be selected as equal cost.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.12
juniBgpVrfMaximumPathsEIbgp
The maximum number of routes received from both EBGP and IBGP peers which BGP can select as equal cost. Zero means that routes from both EBGP and IBGP peers cannot be selected as…
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.14
juniBgpVrfCarriersCarrierModeEnabled obsolete
Obsolete the BGP carrier's carrier flag since there is no need for it when in carrier's carrier mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.16
juniBgpVrfSynchronization
Set this object to true(1) in order to have IGP route synchronization enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.2
juniBgpVrfAutoSummary
Set this object to true(1) in order to automatically summarize redistributed routes to their natural network mask.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.29.1.18.1.3
juniBgpVrfExternalDistance obsolete
Obsolete administrative distance for external routes. Replaced by juniBgpAddressFamilyExternalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.4
juniBgpVrfInternalDistance obsolete
Obsolete administrative distance for internal routes. Replaced by juniBgpAddressFamilyInternalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.5
juniBgpVrfLocalDistance obsolete
Obsolete administrative distance for local routes. Replaced by juniBgpAddressFamilyLocalDistance.
columnInteger32.1.3.6.1.4.1.4874.2.2.29.1.18.1.6
juniBgpVrfResetConnectionType
Writing a value to this object causes the sessions to all peers in this VRF to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft cle…
columnJuniBgpResetConnectionType.1.3.6.1.4.1.4874.2.2.29.1.18.1.7
juniBgpVrfRowStatus
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.29.1.18.1.8
juniBgpVrfOperationalState
The BGP VRF operational state.
columnEnumeration.1.3.6.1.4.1.4874.2.2.29.1.18.1.9