juniBgpVrfOperationalState
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.18.1.9
Object
column
Enumeration
The BGP VRF operational state.
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.18.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- juniBgpVrfEntry
- Table
- juniBgpVrfTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | up |
2 | down |
3 | overload |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpVrfName The name of the VPN Routing Forwarding (VRF) instance. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.18.1.1 |
| juniBgpVrfAddUnicastRoutesToMulticastView Set this object to true(1) in order to add routes learnt by IPv4
Unicast BGP to the multicast route table. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.18.1.10 |
| juniBgpVrfMaximumPathsEbgp The maximum number of routes received from EBGP peers which BGP
can select as equal cost. Zero means that routes from EBGP peers
cannot be selected as equal cost. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.11 |
| juniBgpVrfMaximumPathsIbgp The maximum number of routes received from IBGP peers which BGP
can select as equal cost. Zero means that routes from IBGP peers
cannot be selected as equal cost. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.12 |
| juniBgpVrfUnconfiguredAttributes On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operationa… | column | Bits | .1.3.6.1.4.1.4874.2.2.29.1.18.1.13 |
| juniBgpVrfMaximumPathsEIbgp The maximum number of routes received from both EBGP and IBGP peers
which BGP can select as equal cost. Zero means that routes from both
EBGP and IBGP peers cannot be selected as… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.14 |
| juniBgpVrfCarriersCarrierModeEnabled obsolete Obsolete the BGP carrier's carrier flag since there is no need for it
when in carrier's carrier mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.18.1.16 |
| juniBgpVrfSynchronization Set this object to true(1) in order to have IGP route synchronization
enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.18.1.2 |
| juniBgpVrfAutoSummary Set this object to true(1) in order to automatically summarize
redistributed routes to their natural network mask. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.18.1.3 |
| juniBgpVrfExternalDistance obsolete Obsolete administrative distance for external routes. Replaced by
juniBgpAddressFamilyExternalDistance. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.4 |
| juniBgpVrfInternalDistance obsolete Obsolete administrative distance for internal routes. Replaced by
juniBgpAddressFamilyInternalDistance. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.5 |
| juniBgpVrfLocalDistance obsolete Obsolete administrative distance for local routes. Replaced by
juniBgpAddressFamilyLocalDistance. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.18.1.6 |
| juniBgpVrfResetConnectionType Writing a value to this object causes the sessions to all peers in this
VRF to be cleared; the value determines what type of clear is executed
(hard clear, soft clear in, soft cle… | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.18.1.7 |
| juniBgpVrfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.18.1.8 |