juniBgpPeerUnconfiguredAttributes
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.4.1.60
Object
column
r/w
Bits
On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operational value).
1 = The attribute is unconfigured (i.e. the operational value is
inherited from the a higher level which could be the default
value).
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
On write each bit indicates whether or not the corresponding attribute
should be set to the unconfigured state:
0 = No operation (i.e. do not change the state of the attribute).
1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.4.1.60- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniBgpPeerEntry
- Table
- juniBgpPeerTable
- Siblings
- 84
Syntax
Bits
Values & Constraints
Enumerated Values
0 | juniBgpPeerAdminStatus |
1 | juniBgpPeerRetryInterval |
2 | juniBgpPeerConfigHoldTime |
3 | juniBgpPeerConfigKeepAliveInterval |
4 | juniBgpPeerAsOriginationInterval |
5 | juniBgpPeerAdvertisementInterval |
6 | juniBgpPeerDescription |
7 | juniBgpPeerWeight |
8 | juniBgpPeerEbgpMultihop |
9 | juniBgpPeerEbgpMultihopTtl |
10 | juniBgpPeerUpdateSource |
11 | juniBgpPeerMd5Password |
12 | juniBgpPeerMaxUpdateSize |
13 | juniBgpPeerFourOctetRemoteAsNumber |
14 | juniBgpPeerFourOctetLocalAsNumber |
15 | juniBgpPeerShouldAdvertiseCapabilitiesOption |
16 | juniBgpPeerShouldAdvertiseCapabilityRouteRefresh |
17 | juniBgpPeerShouldAdvertiseCapabilityRouteRefreshCisco |
18 | juniBgpPeerShouldAdvertiseCapabilityFourOctetAsNumbers |
19 | juniBgpPeerShouldAdvertiseCapabilityDynamicCapabilityNeg |
20 | juniBgpPeerSiteOfOrigin |
21 | juniBgpPeerLenient |
22 | juniBgpPeerShouldAdvertiseCapabilityOldDynamicCapabilityNeg |
23 | juniBgpPeerPassive |
24 | juniBgpPeerShouldAdvertiseCapabilityGracefulRestart |
25 | juniBgpPeerGracefulRestartRestartTime |
26 | juniBgpPeerGracefulRestartStalePathsTime |
27 | juniBgpPeerBfdEnabled |
28 | juniBgpPeerBfdMinTransmitInterval |
29 | juniBgpPeerBfdMinReceiveInterval |
30 | juniBgpPeerBfdMultiplier |
31 | juniBgpPeerIbgpSinglehop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpPeerVrfName The name of the VPN Routing Forwarding (VRF) instance in which this
peer is configured. The empty string indicates that this peer is not in
a VRF. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.4.1.1 |
| juniBgpPeerRemotePort The remote port for the TCP connection between the BGP peers. Note
that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr
and bgpPeerRemotePort provide the approp… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.10 |
| juniBgpPeerInUpdates The number of BGP UPDATE messages received on this connection. This
object should be initialized to zero (0) when the connection is
established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.11 |
| juniBgpPeerOutUpdates The number of BGP UPDATE messages transmitted on this connection. This
object should be initialized to zero (0) when the connection is
established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.12 |
| juniBgpPeerInTotalMessages The total number of messages received from the remote peer on this
connection. This object should be initialized to zero when the
connection is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.13 |
| juniBgpPeerOutTotalMessages The total number of messages transmitted to the remote peer on this
connection. This object should be initialized to zero when the
connection is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.14 |
| juniBgpPeerLastErrorCode The last error code and subcode seen by this peer on this connection.
If no error has occurred, this field is zero. Otherwise, the first byte
of this two byte OCTET STRING contai… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.4.1.15 |
| juniBgpPeerLastResetReason The string representing the last error code seen by this peer on this
connection. If no error has occurred, this string is null. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.4.1.16 |
| juniBgpPeerFsmEstablishedTransitions The total number of times the BGP FSM transitioned into the established
state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.17 |
| juniBgpPeerFsmEstablishedTime This timer indicates how long (in seconds) this peer has been in the
Established state or how long since this peer was last in the
Established state. It is set to zero when a new… | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.18 |
| juniBgpPeerRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.19 |
| juniBgpPeerRemoteAddress The remote IP address of this entry's BGP peer. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.4.1.2 |
| juniBgpPeerHoldTime Time interval in seconds for the Hold Timer established with the peer.
The value of this object is calculated by this BGP speaker by using the
smaller of the value in bgpPeerHoldT… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.20 |
| juniBgpPeerKeepAliveInterval Time interval in seconds for the KeepAlive timer established with the
peer. The value of this object is calculated by this BGP speaker such
that, when compared with bgpPeerHoldTi… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.21 |
| juniBgpPeerConfigHoldTime Time interval in seconds for the Hold Time configured for this BGP
speaker with this peer. This value is placed in an OPEN message sent to
this peer by this BGP speaker, and is c… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.22 |
| juniBgpPeerConfigKeepAliveInterval Time interval in seconds for the KeepAlive timer configured for this
BGP speaker with this peer. The value of this object will only
determine the KEEPALIVE messages' frequency re… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.23 |
| juniBgpPeerAsOriginationInterval Time interval in seconds for the MinASOriginationInterval timer. The
suggested value for this timer is 10 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.24 |
| juniBgpPeerAdvertisementInterval Time interval in seconds for the MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.25 |
| juniBgpPeerInUpdateElapsedTime Elapsed time in seconds since the last BGP UPDATE message was received
from the peer. Each time bgpPeerInUpdates is incremented, the value of
this object is set to zero (0). | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.26 |
| juniBgpPeerDescription Peer textual description. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.4.1.27 |
| juniBgpPeerRemoteIdentifier Peer's remote router ID. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.4.1.28 |
| juniBgpPeerWeight The weight assigned to routes learned from peer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.29 |
| juniBgpPeerAdminStatus The desired state of the BGP connection. A transition from 'stop' to
'start' will cause the BGP Start Event to be generated. A transition
from 'start' to 'stop' will cause the B… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.4.1.3 |
| juniBgpPeerEbgpMultihop The EBGP multihop is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.30 |
| juniBgpPeerEbgpMultihopTtl Maximum number of hops to the external peer (only relevant if EBGP
multihop turned on). | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.31 |
| juniBgpPeerUpdateSource The source IP address for peer connections. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.4.1.32 |
| juniBgpPeerMd5Password The password for MD5 authentication. Reading this object always
results in an OCTET STRING of length zero. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.4.1.33 |
| juniBgpPeerMaxUpdateSize The maximum size in bytes of transmitted UPDATE messages. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.34 |
| juniBgpPeerType The type of peer. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.4.1.35 |
| juniBgpPeerReceivedCapabilitiesOption The peer sent the capabilities optional parameter in its open message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.36 |
| juniBgpPeerReceivedCapabilityMultiProtocol The peer has advertised the multi-protocol capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.37 |
| juniBgpPeerReceivedCapabilityRouteRefresh The peer has advertised the route-refresh capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.38 |
| juniBgpPeerReceivedCapabilityRouteRefreshCisco The peer has advertised the route-refresh-cisco capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.39 |
| juniBgpPeerState The BGP peer connection state. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.4.1.4 |
| juniBgpPeerResetConnectionType Writing a value to this object causes the session to the peer to be
cleared; the value determines what type of clear is executed (hard
clear, soft clear in, soft clear out, etc.).… | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.4.1.40 |
| juniBgpPeerRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.4.1.41 |
| juniBgpPeerLocalAsNumber deprecated Deprecated. The local autonomous system number to be used for this
peer. Value zero (0) means that the global local automous system number
(as specified in the object juniBgpPee… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.42 |
| juniBgpPeerFourOctetRemoteAsNumber The peer's four-octet autonomous system number. | column | JuniBgpFourOctetAsNumber | .1.3.6.1.4.1.4874.2.2.29.1.4.1.43 |
| juniBgpPeerFourOctetLocalAsNumber The four-octet local autonomous system number to be used for this peer.
Value zero (0) means that the global local automous system number (as
specified in the object juniBgpPeerFo… | column | JuniBgpFourOctetAsNumber | .1.3.6.1.4.1.4874.2.2.29.1.4.1.44 |
| juniBgpPeerReceivedCapabilityFourOctetAsNumbers The peer has advertised the four-octet-as-numbers capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.45 |
| juniBgpPeerReceivedCapabilityDynamicCapabilityNeg The peer has advertised the dynamic-capability-negotiation capability
to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.46 |
| juniBgpPeerShouldAdvertiseCapabilitiesOption Set this object to true if the capabilities option should be included
in OPEN messages sent to this peer. Even if this object is set to true,
BGP may decide not to include the ca… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.47 |
| juniBgpPeerShouldAdvertiseCapabilityRouteRefresh Set this object to true if the route-refresh capability should be
advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the route-refresh c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.48 |
| juniBgpPeerShouldAdvertiseCapabilityRouteRefreshCisco Set this object to true if the route-refresh-cisco capability should be
advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the route-ref… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.49 |
| juniBgpPeerNegotiatedVersion The negotiated version of BGP running between the two peers. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.5 |
| juniBgpPeerShouldAdvertiseCapabilityFourOctetAsNumbers Set this object to true if the four-octet-as-numbers capability should
be advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the four-oc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.50 |
| juniBgpPeerShouldAdvertiseCapabilityDynamicCapabilityNeg Set this object to true if the dynamic-capability-negotiation
capability should be advertised to this peer. Even if this object is
set to true, BGP may decide not to advertise th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.51 |
| juniBgpPeerSentCapabilitiesOption We sent the capabilities optional parameter in the OPEN message to this
peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.52 |
| juniBgpPeerSentCapabilityMultiProtocol We advertised the multi-protocol capability to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.53 |
| juniBgpPeerSentCapabilityRouteRefresh We advertised the route-refresh capability to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.54 |
| juniBgpPeerSentCapabilityRouteRefreshCisco We advertised the route-refresh-cisco capability to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.55 |
| juniBgpPeerSentCapabilityFourOctetAsNumbers We advertised the four-octet-as-numbers capability to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.56 |
| juniBgpPeerSentCapabilityDynamicCapabilityNeg We advertised the dynamic-capability-negotiation capability to this
peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.57 |
| juniBgpPeerReceivedUnsupportedOptionalParameterNotification We received an unsupported optional parameter notification from this
peer. This indicates that the peer does not support capability
negotiation. When this object is set to true,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.58 |
| juniBgpPeerReceivedUnsupportedCapabilityNotification We received an unsupported capability notification from this peer.
This often happens because the peer did not recognize a capability which
we advertised to the peer and that peer… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.59 |
| juniBgpPeerLocalAddress The local IP address of this entry's BGP connection. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.4.1.6 |
| juniBgpPeerSiteOfOrigin The site-of-origin. This site-of-origin is added to the extended
communities for all routes received from the peer. When sending routes
to this peer all routes with this extende… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.4.1.61 |
| juniBgpPeerLenient Enable Lenient behavior for this peer so that it is more tolerant of
finite state machine errors and malformed messages received from the
remote peer and avoids terminating the pe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.62 |
| juniBgpPeerReceivedCapabilityOldDynamicCapabilityNeg The peer has advertised the old deprecated dynamic-capability-
negotiation capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.63 |
| juniBgpPeerShouldAdvertiseCapabilityOldDynamicCapabilityNeg Set this object to true if the deprecated-dynamic-capability-
negotiation capability should be advertised to this peer. Even if this
object is set to true, BGP may decide not to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.64 |
| juniBgpPeerSentCapabilityOldDynamicCapabilityNeg We advertised the old-dynamic-capability-negotiation capability to this
peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.65 |
| juniBgpPeerPassive Set this object to true(1) to make this a passive peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.66 |
| juniBgpPeerDynamic This object return true(1) if this is a dynamically created peer or
false(2) if this is a configured peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.67 |
| juniBgpPeerShouldAdvertiseCapabilityGracefulRestart Set this object to true if the graceful-restart capability should be
advertised to all peers. Even if this object is set to true, BGP may
decide not to advertise the graceful-res… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.68 |
| juniBgpPeerSentCapabilityGracefulRestart We advertised the graceful-restart capability to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.69 |
| juniBgpPeerLocalAddressMask The local IP address mask of this entry's BGP connection. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.4.1.7 |
| juniBgpPeerReceivedCapabilityGracefulRestart The peer has advertised the graceful-restart capability to us. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.70 |
| juniBgpPeerGracefulRestartRestartTime The restart-time advertised in the graceful-restart capability sent to
this peer. This is the estimated time (in seconds) it will take for
the BGP session to be re-established a… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.71 |
| juniBgpPeerGracefulRestartStalePathsTime The maximum amount of time in seconds we keep stale routes after the
session to this peer goes down. This value (if configured)
overrides the global value configured in juniBgpGra… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.72 |
| juniBgpPeerSentGracefulRestartRestartState Value true(1) indicates that the OPEN message most recently sent to
this peer contained the graceful-restart capability with the
Restart-State (R) bit in the Restart Flags field… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.73 |
| juniBgpPeerReceivedGracefulRestartRestartState Value true(1) indicates that the OPEN message most recently received
from this peer contained the graceful-restart capability with the
Restart-State (R) bit in the Restart Flags … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.74 |
| juniBgpPeerSentGracefulRestartRestartTime The restart time in seconds field in the graceful-restart capability
which we sent to the peer. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.75 |
| juniBgpPeerReceivedGracefulRestartRestartTime The restart time in seconds field in the graceful-restart capability
which we received from the peer. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.76 |
| juniBgpPeerTimeUntilGracefulRestartRestartTimerExpires If the restart-timer is running this object contains the number of
seconds before it will expire. If the restart-timer is not running this
object contains zero. The restart-time… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.77 |
| juniBgpPeerTimeUntilGracefulRestartStalePathsTimerExpires If the stale-paths-timer is running this object contains the number
of seconds before it will expire. If the stale-paths-timer is not
running this object contains zero. The stal… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.78 |
| juniBgpPeerBfdEnabled Value true(1) the BFD is enabled for this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.79 |
| juniBgpPeerLocalPort The local port for the TCP connection between the BGP peers. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.8 |
| juniBgpPeerBfdMinTransmitInterval The minimum interval (in milliseconds) between BFD packets sent
to the remote BFD speaker. In other words, it specifies the maximum
rate at which we are willing to send BFD packet… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.80 |
| juniBgpPeerBfdMinReceiveInterval The minimum interval (in milliseconds) between BFD packets received
from the remote BFD speaker. In other words, it specifies the maximum
rate at which we are willing to receive B… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.81 |
| juniBgpPeerBfdMultiplier How many BFD packets can be missed before the BFD session is declared
down. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.82 |
| juniBgpPeerBfdSessionUp Is the BFD session up. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.83 |
| juniBgpPeerBfdDetectionTime The BFD detection time (in milliseconds) negotiated with the remote BFD
speaker. In other words, how quickly can a broken connection be detected. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.84 |
| juniBgpPeerIbgpSinglehop The IBGP single-hop is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.4.1.85 |
| juniBgpPeerRemoteAsNumber deprecated Deprecated. The peer's autonomous system number. This object has been
replaced by juniBgpPeerFourOctetRemoteAsNumber. It is still possible to
get and set this object, but if th… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.4.1.9 |