juniBgpPeerGroupGracefulRestartRestartTime
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.9.1.39
Object
column
r/w
Integer32
The restart-time advertised in the graceful-restart capability sent to members of this peer-group. This is the estimated time (in seconds) it will take for the BGP session to be re-established after a restart. This can be used to speed up routing convergence by the peer in case that this BGP speaker does not come back after a restart. This value (if configured) overrides the global value configured in juniBgpGracefulRestartRestartTime.
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.9.1.39- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniBgpPeerGroupEntry
- Table
- juniBgpPeerGroupTable
- Siblings
- 44
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-3600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpPeerGroupVrfName The name of the VPN Routing Forwarding (VRF) instance in which this
peer-group is configured. The empty string indicates that this
peer-group is not in a VRF. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.9.1.1 |
| juniBgpPeerGroupDescription Peer textual description. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.9.1.10 |
| juniBgpPeerGroupWeight The weight assigned to routes learned from peer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.11 |
| juniBgpPeerGroupEbgpMultihop The EBGP multihop is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.12 |
| juniBgpPeerGroupEbgpMultihopTtl Maximum number of hops to the external peer (only relevant if EBGP
multihop turned on). | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.13 |
| juniBgpPeerGroupUpdateSource The source IP address for peer connections. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.9.1.14 |
| juniBgpPeerGroupMd5Password The password for MD5 authentication. Reading this object always
results in an OCTET STRING of length zero. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.9.1.15 |
| juniBgpPeerGroupMaxUpdateSize The maximum size in bytes of transmitted UPDATE messages. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.16 |
| juniBgpPeerGroupResetConnectionType Writing a value to this object causes the sessions to all peers in the
peer-group to be cleared; the value determines what type of clear is
executed (hard clear, soft clear in, so… | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.9.1.17 |
| juniBgpPeerGroupRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.9.1.18 |
| juniBgpPeerGroupLocalAsNumber deprecated Deprecated. The local autonomous system number to be used for members.
of this peer-group. Value zero (0) means that the global local automous
system number (as specified in the… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.19 |
| juniBgpPeerGroupGroupName The name of the Peer group this instance configures. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.9.1.2 |
| juniBgpPeerGroupFourOctetRemoteAsNumber The peer's four-octet autonomous system number. | column | JuniBgpFourOctetAsNumber | .1.3.6.1.4.1.4874.2.2.29.1.9.1.20 |
| juniBgpPeerGroupFourOctetLocalAsNumber The four-octet local autonomous system number to be used for this peer.
Value zero (0) means that the global local automous system number (as
specified in the object juniBgpPeerGr… | column | JuniBgpFourOctetAsNumber | .1.3.6.1.4.1.4874.2.2.29.1.9.1.21 |
| juniBgpPeerGroupShouldAdvertiseCapabilitiesOption Set this object to true if the capabilities option should be included
in OPEN messages sent to this peer. Even if this object is set to true,
BGP may decide not to include the ca… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.22 |
| juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefresh Set this object to true if the route-refresh capability should be
advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the route-refresh c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.23 |
| juniBgpPeerGroupShouldAdvertiseCapabilityRouteRefreshCisco Set this object to true if the route-refresh-cisco capability should be
advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the route-ref… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.24 |
| juniBgpPeerGroupShouldAdvertiseCapabilityFourOctetAsNumbers Set this object to true if the four-octet-as-numbers capability should
be advertised to this peer. Even if this object is set to true, BGP may
decide not to advertise the four-oc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.25 |
| juniBgpPeerGroupShouldAdvertiseCapabilityDynamicCapabilityNeg Set this object to true if the dynamic-capability-negotiation
capability should be advertised to this peer. Even if this object is
set to true, BGP may decide not to advertise th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.26 |
| juniBgpPeerGroupUnconfiguredAttributes On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operationa… | column | Bits | .1.3.6.1.4.1.4874.2.2.29.1.9.1.27 |
| juniBgpPeerGroupSiteOfOrigin The site-of-origin. This site-of-origin is added to the extended
communities for all routes received from the peer. When sending routes
to this peer-group all routes with this e… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.9.1.28 |
| juniBgpPeerGroupLenient Enable Lenient behavior for member peers so that they are more tolerant
of finite state machine errors and malformed messages received from the
remote peer and avoid terminating t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.29 |
| juniBgpPeerGroupAdminStatus The desired state of the BGP connection. A transition from 'stop' to
'start' will cause the BGP Start Event to be generated. A transition
from 'start' to 'stop' will cause the B… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.9.1.3 |
| juniBgpPeerGroupShouldAdvertiseCapabilityOldDynamicCapabilityNeg Set this object to true if the deprecated-dynamic-capability-
negotiation capability should be advertised to this peer. Even if this
object is set to true, BGP may decide not to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.30 |
| juniBgpPeerGroupPassive Set this object to true(1) to make members of this peer-group passive. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.31 |
| juniBgpPeerGroupConfiguredPeerType The type of the members of the peer-group. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.9.1.32 |
| juniBgpPeerGroupAllowAccessListName The name of the access-list for promiscuous peers. When an incoming
connection arrives whose remote address matches this access-list the
connection is accepted and a dynamic peer… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.9.1.33 |
| juniBgpPeerGroupAllowMaxPeers The maximum number of dynamic peers for this peer-group. Zero means
that there is no limit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.34 |
| juniBgpPeerGroupCurrentDynamicPeerCount The current number of dynamic peers for this peer-group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.35 |
| juniBgpPeerGroupHighWaterMarkDynamicPeerCount The high water mark for the number of dynamic peers for this
peer-group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.36 |
| juniBgpPeerGroupRejectedDynamicPeerCount The number of connection attempts for dynamic peers that were rejected
because the number number of dynamic peers was reached. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.37 |
| juniBgpPeerGroupShouldAdvertiseCapabilityGracefulRestart Set this object to true if the graceful-restart capability should be
advertised to all members of the peer-group. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.38 |
| juniBgpPeerGroupRemoteAsNumber deprecated Deprecated. The peer's autonomous system number. This object has been
replaced by juniBgpPeerGroupFourOctetRemoteAsNumber. It is still
possible to get and set this object, but … | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.4 |
| juniBgpPeerGroupGracefulRestartStalePathsTime The maximum amount of time in seconds we keep stale routes after the
session to a member of this peer-group goes down. This value (if
configured) overrides the global value confi… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.40 |
| juniBgpPeerGroupBfdEnabled Value true(1) the BFD is enabled for this peer-group. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.41 |
| juniBgpPeerGroupBfdMinTransmitInterval The minimum interval (in milliseconds) between BFD packets sent
to the remote BFD speaker. In other words, it specifies the maximum
rate at which we are willing to send BFD packet… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.42 |
| juniBgpPeerGroupBfdMinReceiveInterval The minimum interval (in milliseconds) between BFD packets received
from the remote BFD speaker. In other words, it specifies the maximum
rate at which we are willing to receive B… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.43 |
| juniBgpPeerGroupBfdMultiplier How many BFD packets can be missed before the BFD session is declared
down. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.44 |
| juniBgpPeerGroupIbgpSinglehop The IBGP single-hop is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.9.1.45 |
| juniBgpPeerGroupRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.5 |
| juniBgpPeerGroupConfigHoldTime Time interval in seconds for the Hold Time configured for this BGP
speaker with this peer. This value is placed in an OPEN message sent to
this peer by this BGP speaker, and is c… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.6 |
| juniBgpPeerGroupConfigKeepAliveInterval Time interval in seconds for the KeepAlive timer configured for this
BGP speaker with this peer. The value of this object will only
determine the KEEPALIVE messages' frequency re… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.7 |
| juniBgpPeerGroupAsOriginationInterval Time interval in seconds for the MinASOriginationInterval timer. The
suggested value for this timer is 10 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.8 |
| juniBgpPeerGroupAdvertisementInterval Time interval in seconds for the MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.9.1.9 |