juniBgpPeerAddressFamilyUnconfiguredAttributes
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.8.1.44
Object
column
r/w
Bits
On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operational value).
1 = The attribute is unconfigured (i.e. the operational value is
inherited from the a higher level which could be the default
value).
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
On write each bit indicates whether or not the corresponding attribute
should be set to the unconfigured state:
0 = No operation (i.e. do not change the state of the attribute).
1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.8.1.44- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniBgpPeerAddressFamilyEntry
- Table
- juniBgpPeerAddressFamilyTable
- Siblings
- 54
Syntax
Bits
Values & Constraints
Enumerated Values
0 | juniBgpPeerAddressFamilyPeerGroup |
1 | juniBgpPeerAddressFamilyDefaultOriginate |
2 | juniBgpPeerAddressFamilyNextHopSelf |
3 | juniBgpPeerAddressFamilySendCommunity |
4 | juniBgpPeerAddressFamilyDistributeListIn |
5 | juniBgpPeerAddressFamilyDistributeListOut |
6 | juniBgpPeerAddressFamilyPrefixListIn |
7 | juniBgpPeerAddressFamilyPrefixListOut |
8 | juniBgpPeerAddressFamilyPrefixTreeIn |
9 | juniBgpPeerAddressFamilyPrefixTreeOut |
10 | juniBgpPeerAddressFamilyFilterListIn |
11 | juniBgpPeerAddressFamilyFilterListOut |
12 | juniBgpPeerAddressFamilyFilterListWeight |
13 | juniBgpPeerAddressFamilyFilterListWeightValue |
14 | juniBgpPeerAddressFamilyRouteMapIn |
15 | juniBgpPeerAddressFamilyRouteMapOut |
16 | juniBgpPeerAddressFamilyRouteReflectorClient |
17 | juniBgpPeerAddressFamilyRouteLimitWarn |
18 | juniBgpPeerAddressFamilyRouteLimitReset |
19 | juniBgpPeerAddressFamilyRouteLimitWarnOnly |
20 | juniBgpPeerAddressFamilyRemovePrivateAs |
21 | juniBgpPeerAddressFamilyUnsuppressMap |
22 | juniBgpPeerAddressFamilyInboundSoftReconfig |
23 | juniBgpPeerAddressFamilyAsOverride |
24 | juniBgpPeerAddressFamilyAllowAsIn |
25 | juniBgpPeerAddressFamilySendExtendedCommunity |
26 | juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfSend |
27 | juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfReceive |
28 | juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfSend |
29 | juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfReceive |
30 | juniBgpPeerAddressFamilyReceivedOrfEntriesLimit |
31 | juniBgpPeerAddressFamilyMaximumPrefixStrict |
32 | juniBgpPeerAddressFamilySendLabel |
33 | juniBgpPeerAddressFamilyDefaultOriginateRouteMap |
34 | juniBgpPeerAddressFamilyNextHopUnchanged |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpPeerAddressFamilyVrfName The name of the VPN Routing Forwarding (VRF) instance in which this
peer is configured. The empty string indicates that this peer is not in
a VRF. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.8.1.1 |
| juniBgpPeerAddressFamilyDistributeListOut The outbound distribute IP access list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.10 |
| juniBgpPeerAddressFamilyPrefixListIn The inbound IP prefix list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.11 |
| juniBgpPeerAddressFamilyPrefixListOut The outbound IP prefix list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.12 |
| juniBgpPeerAddressFamilyPrefixTreeIn The inbound IP prefix tree name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.13 |
| juniBgpPeerAddressFamilyPrefixTreeOut The outbound IP prefix tree name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.14 |
| juniBgpPeerAddressFamilyFilterListIn The inbound filter AS path list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.15 |
| juniBgpPeerAddressFamilyFilterListOut The outbound filter AS path list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.16 |
| juniBgpPeerAddressFamilyFilterListWeight The weight filter AS path list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.17 |
| juniBgpPeerAddressFamilyFilterListWeightValue The weight to apply on weight filter list matches. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.8.1.18 |
| juniBgpPeerAddressFamilyRouteMapIn The inbound route-map name. An empty string means no inbound
route-map. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.19 |
| juniBgpPeerAddressFamilyAfi The AFI of the address-family in which this peer is configured. | column | JuniBgpAfi | .1.3.6.1.4.1.4874.2.2.29.1.8.1.2 |
| juniBgpPeerAddressFamilyRouteMapOut The outbound route-map name. An empty string means no outbound
route-map. | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.20 |
| juniBgpPeerAddressFamilyRouteReflectorClient The peer is a route reflector client. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.21 |
| juniBgpPeerAddressFamilyRouteLimitWarn Log a warning if pathCount exceeds this value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.8.1.22 |
| juniBgpPeerAddressFamilyRouteLimitReset Reset connection is pathCount exceeds this value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.8.1.23 |
| juniBgpPeerAddressFamilyRouteLimitWarnOnly Warn, but do not reset, if the path limit is exceeded. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.24 |
| juniBgpPeerAddressFamilyRemovePrivateAs Remove private AS numbers from AS paths. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.25 |
| juniBgpPeerAddressFamilyUnsuppressMap The unsuppress route-map name. Routes which are sent to this peer and
which match this route-map are not subject to suppression by
summary-only aggregates. An empty string means… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.26 |
| juniBgpPeerAddressFamilyInboundSoftReconfig Inbound soft-reconfiguration is enabled. If inbound
soft-reconfiguration is enabled we keep a copy of each received route
before inbound policy was applied. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.27 |
| juniBgpPeerAddressFamilyResetConnectionType Writing a value to this object causes one individual address family
within the session to the peer to be cleared; the value determines what
type of clear is executed (hard clear, … | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.8.1.28 |
| juniBgpPeerAddressFamilyRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.8.1.29 |
| juniBgpPeerAddressFamilySafi The SAFI of the address-family in which this peer is configured. | column | JuniBgpSafi | .1.3.6.1.4.1.4874.2.2.29.1.8.1.3 |
| juniBgpPeerAddressFamilyAsOverride Replace the AS number of the peer by our own AS number in the AS-path
attribute in UPDATEs sent to this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.30 |
| juniBgpPeerAddressFamilyAllowAsIn The maximum number of times our own AS number is allowed to occur in a
received AS-path before that received route is considered to be a loop
and therefore rejected. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.8.1.31 |
| juniBgpPeerAddressFamilySendExtendedCommunity Set this object to true(1) in order to send EXTENDED-COMMUNITIES
attributes in updates. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.32 |
| juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfSend Set this object to true(1) in order to send PREFIX-LIST ORF SEND
CAPABILITY in Open Message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.33 |
| juniBgpPeerAddressFamilyAdvertiseCapPrefixListOrfReceive Set this object to true(1) in order to send PREFIX-LIST ORF RECEIVE
CAPABILITY in Open Message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.34 |
| juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfSend Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF SEND
CAPABILITY in Open Message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.35 |
| juniBgpPeerAddressFamilyAdvertiseCapPrefixListCiscoOrfReceive Set this object to true(1) in order to send PREFIX-LIST-CISCO ORF
RECEIVE CAPABILITY in Open Message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.36 |
| juniBgpPeerAddressFamilyReceivedCapPrefixListOrfSend The peer has sent PREFIX-LIST ORF SEND CAPABILITY to us for this
address family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.37 |
| juniBgpPeerAddressFamilyReceivedCapPrefixListOrfReceive The peer has sent PREFIX-LIST ORF RECEIVE CAPABILITY to us for this
address family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.38 |
| juniBgpPeerAddressFamilyReceivedCapPrefixListCiscoOrfSend The peer has sent PREFIX-LIST-CISCO ORF SEND CAPABILITY to us for this
address family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.39 |
| juniBgpPeerAddressFamilyRemoteAddress The remote IP address of this entry's BGP peer. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4874.2.2.29.1.8.1.4 |
| juniBgpPeerAddressFamilyReceivedCapPrefixListCiscoOrfReceive The peer has sent PREFIX-LIST-CISCO ORF RECEIVE CAPABILITY to us for
this address family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.40 |
| juniBgpPeerAddressFamilyReceivedOrfEntriesLimit Ignore received ORF entries for this address family if count exceeds
this value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.8.1.41 |
| juniBgpPeerAddressFamilyReceivedPrefixListOrfName The prefix list name containing ORF entries received from the peer
for this address family | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.42 |
| juniBgpPeerAddressFamilyMaximumPrefixStrict If the juniBgpPeerAddressFamilyInboundSoftReconfig object is set to
true then routes which were rejected by inbound policy are stored in
memory anyway. The juniBgpPeerAddressFami… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.43 |
| juniBgpPeerAddressFamilySendLabel Send labeled prefixes to this peer for this address-family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.45 |
| juniBgpPeerAddressFamilyDefaultOriginateRouteMap The route-map to apply to the default route which is advertised to this
peer as a result of setting juniBgpPeerAddressFamilyDefaultOriginate to
true. An empty string means that n… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.46 |
| juniBgpPeerAddressFamilySentCapabilityGracefulRestart Value true(1) means that an AFI-SAFI block for this address-family
was included in the graceful-restart capability which we sent to this
peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.47 |
| juniBgpPeerAddressFamilyReceivedCapabilityGracefulRestart Value true(1) means that an AFI-SAFI block for this address-family
was included in the graceful-restart capability which we received from
this peer. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.48 |
| juniBgpPeerAddressFamilySentForwardingStatePreserved Value true(1) indicates that the OPEN message most recently sent to
this peer contained the graceful-restart capability which included an
AFI-SAFI block for this address-family … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.49 |
| juniBgpPeerAddressFamilyPeerGroup Peer group membership (null if none). | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.5 |
| juniBgpPeerAddressFamilyReceivedForwardingStatePreserved Value true(1) indicates that the OPEN message most recently received
from this peer contained the graceful-restart capability which included
an AFI-SAFI block for this address-fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.50 |
| juniBgpPeerAddressFamilySentEndOfRibMarker Value true(1) indicates that we have sent an End-of-RIB marker
for this address-family to this peer since the session became
established. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.51 |
| juniBgpPeerAddressFamilyReceivedEndOfRibMarker Value true(1) indicates that we have received an End-of-RIB marker
for this address-family from this peer since the session became
established. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.52 |
| juniBgpPeerAddressFamilyWaitingForEndOfRibBeforeFlushStaleRoutes Value true(1) indicates that we are still waiting for an
End-of-RIB marker from this peer before flushing all remaining
stale routes from the address-family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.53 |
| juniBgpPeerAddressFamilyWaitingForEndOfRibBeforePathSelection Value true(1) indicates that we are still waiting for an
End-of-RIB marker from this peer before we stop deferring
path selection for this address-family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.54 |
| juniBgpPeerAddressFamilyNextHopUnchanged Set this object to true(1) in order to always advertise the
the next-hop unchanged to this peer for this address-family. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.55 |
| juniBgpPeerAddressFamilyDefaultOriginate Set this object to true(1) in order to advertise a default route to
this peer, if present. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.6 |
| juniBgpPeerAddressFamilyNextHopSelf Set this object to true(1) in order to always advertise this router as
the next hop. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.7 |
| juniBgpPeerAddressFamilySendCommunity Set this object to true(1) in order to send COMMUNITIES attributes in
updates. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.8.1.8 |
| juniBgpPeerAddressFamilyDistributeListIn The inbound distribute IP access list name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.29.1.8.1.9 |