jnxIpSecTunMonKeyType

JUNIPER-IPSEC-FLOW-MON-MIB · .1.3.6.1.4.1.2636.3.52.1.2.2.1.8
MIB view Table view

Object

column JnxKeyType 
The type of key used by the IPsec Phase-2 Tunnel. It can be
one of the following two types:
  - IKE negotiated
  - Manually installed

Context

MIB
JUNIPER-IPSEC-FLOW-MON-MIB
OID
.1.3.6.1.4.1.2636.3.52.1.2.2.1.8
Type
column
Access
readonly
Status
current
Parent
jnxIpSecTunnelMonEntry
Table
jnxIpSecTunnelMonTable
Siblings
35

Syntax

JnxKeyType
Source
JnxKeyType
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1keyIke
2keyManual

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxIpSecTunMonRemoteGwAddrType
The IP address type of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2636.3.52.1.2.2.1.1
jnxIpSecTunMonOutEncryptedBytes
Number of bytes encrypted by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.10
jnxIpSecTunMonOutEncryptedPkts
Number of packets encrypted by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.11
jnxIpSecTunMonInDecryptedBytes
Number of bytes decrypted by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.12
jnxIpSecTunMonInDecryptedPkts
Number of packets decrypted by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.13
jnxIpSecTunMonAHInBytes
Number of incoming bytes authenticated using AH by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.14
jnxIpSecTunMonAHInPkts
Number of incoming packets authenticated using AH by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.15
jnxIpSecTunMonAHOutBytes
Number of outgoing bytes applied AH by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.16
jnxIpSecTunMonAHOutPkts
Number of outgoing packets applied AH by this Phase-2 tunnel.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.17
jnxIpSecTunMonReplayDropPkts
Number of packets dropped by this Phase-2 tunnel due to anti replay check failure.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.18
jnxIpSecTunMonAhAuthFails
Number of packets received by this Phase-2 tunnel that failed AH authentication.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.19
jnxIpSecTunMonRemoteGwAddr
The IP address of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2636.3.52.1.2.2.1.2
jnxIpSecTunMonEspAuthFails
Number of packets received by this Phase-2 tunnel that failed ESP authentication.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.20
jnxIpSecTunMonDecryptFails
Number of packets received by this Phase-2 tunnel that failed decryption.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.21
jnxIpSecTunMonBadHeaders
Number of packets received by this Phase-2 tunnel that failed due to bad headers.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.22
jnxIpSecTunMonBadTrailers
Number of packets received by this Phase-2 tunnel that failed due to bad ESP trailers.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.23
jnxIpSecTunMonDroppedPkts obsolete
Total number of dropped packets for this Phase-2 tunnel. This attribute is obsolete.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.26
jnxIpSecTunMonVpnName
VPN tunnel name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.27
jnxIpSecTunMonTsName
Traffic selector name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.28
jnxIpSecTunMonMultiSa
Multi-SA Configuration Status.
columnEnumeration.1.3.6.1.4.1.2636.3.52.1.2.2.1.29
jnxIpSecTunMonIndex
The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of t…
columnInteger32.1.3.6.1.4.1.2636.3.52.1.2.2.1.3
jnxIpSecTunMonInvalidSpi
Total number of Invalid SPI for this IPSec tunnel.
columnPackets SNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.30
jnxIpSecTunMonTsCheckFail
Total number of TS check fail for this IPSec tunnel.
columnPackets SNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.31
jnxIpSecTunMonDiscarded
Total number of discarded packets for this IPSec tunnel.
columnPackets SNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.32
jnxIpSecTunMonTunType
The Tunnel type. It can be regular (1) or ha-link (2).
columnJnxIkeTunType.1.3.6.1.4.1.2636.3.52.1.2.2.1.33
jnxIpSecTunMonTsType
The TS type. It can be proxyId (1) or trafficSelector (2).
columnJnxIpSecTsType.1.3.6.1.4.1.2636.3.52.1.2.2.1.34
jnxIpSecTunMonTSi
Negotiated Traffic Selector or Proxy ID for the local end.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.35
jnxIpSecTunMonTSr
Negotiated Traffic Selector or Proxy ID for the remote end.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.36
jnxIpSecTunMonTunMtu
The maximum transmit packet size (256..9192) for IPSec tunnels. The value of this object will be 0, if tunnel MTU is not configured.
columnInteger32.1.3.6.1.4.1.2636.3.52.1.2.2.1.37
jnxIpSecTunMonExceedsTunMtu
Number of packets received by this Phase-2 tunnel that failed due to Exceeding Tunnel MTU.
columnPackets SNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.52.1.2.2.1.38
jnxIpSecTunMonLocalGwAddrType
The IP address type of the local gateway (endpoint) for the IPsec Phase-2 Tunnel.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2636.3.52.1.2.2.1.4
jnxIpSecTunMonLocalGwAddr
The IP address of the local gateway (endpoint) for the IPsec Phase-2 Tunnel.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2636.3.52.1.2.2.1.5
jnxIpSecTunMonLocalProxyId deprecated
Identifier for the local end.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.6
jnxIpSecTunMonRemoteProxyId deprecated
Identifier for the remote end.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.52.1.2.2.1.7
jnxIpSecTunMonRemotePeerType
The type of the remote peer gateway (endpoint). It can be one of the following two types: - static (Remote peer whose IP address is known beforehand) - dynamic (Remote peer wh…
columnJnxRemotePeerType.1.3.6.1.4.1.2636.3.52.1.2.2.1.9