jnxPppMlPppLinkConfigKeepalive
JNX-PPP-MIB ·
.1.3.6.1.4.1.2636.3.68.1.1.6.3.1.4
Object
column
seconds Integer32
Keepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo.
Context
- MIB
- JNX-PPP-MIB
- OID
.1.3.6.1.4.1.2636.3.68.1.1.6.3.1.4- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- jnxPppMlPppLinkConfigEntry
- Table
- jnxPppMlPppLinkConfigTable
- Siblings
- 20
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-0
range: 10-64800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxPppMlPppLinkConfigIfIndex The ifIndex of the MLPPP interface. When creating entries in this
table, suitable values for this object are determined by reading
jnxPppMlPppNextLinkIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.1 |
| jnxPppMlPppLinkConfigChapMaxChallengeLength Maximum value of the CHAP authenticator challenge length value. | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.10 |
| jnxPppMlPppLinkConfigPassiveMode When enabled, LCP state machine is forced into passive mode on lower
layer UP message. It adds compatibility with slow and buggy clients. | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.11 |
| jnxPppMlPppLinkConfigAuthenticatorLogicalSystem The name of the Logical System (Jnxper-ROUTER-MIB.jnxRouterName) to
be used for authentication on the PPP interface. Setting this object
statically binds the authenticating vir… | column | OctetString | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.12 |
| jnxPppMlPppLinkConfigAuthenticatorRoutingInstance The name of the Routing Instance (Jnxper-ROUTER-MIB.jnxRouterName)
to be used for authentication on the PPP interface. Setting this
object statically binds the authenticating v… | column | OctetString | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.13 |
| jnxPppMlPppLinkConfigFragmentation Enables MLPPP fragmentation.With read-create maximum access,
changing this object has an effect when the link is next restarted. | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.14 |
| jnxPppMlPppLinkConfigReassembly Enables MLPPP reassembly. With read-create maximum access,
changing this object has an effect when the link is next restarted. | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.15 |
| jnxPppMlPppLinkConfigMaxReceiveReconstructedUnit The Maximum Receive Reconstructed Unit (MRRU) that the local
PPP entity will advertise to the remote entity. If the value of
this variable is 1, then the MRRU is set to the loca… | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.16 |
| jnxPppMlPppLinkConfigFragmentSize The size of fragments transmitted by the local PPP entity.
If the value of this variable is 1, then the fragment size is set to
the link's MTU value. With read-create maximum acc… | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.17 |
| jnxPppMlPppLinkConfigHashLinkSelection Enables MLPPP hash-based link selection for non-best-effort traffic.
With read-create maximum access,changing this object has an effect
when the link is next restarted. | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.18 |
| jnxPppMlPppLinkConfigAuthentication2 A configuration variable comprised of nibbles i.e. 4 bits, such
that a client can supply a list of 0 to 8 selections. The least
significant nibble is the first value of the lis… | column | JnxNibbleConfig | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.19 |
| jnxPppMlPppLinkConfigLowerIfIndex The ifIndex of an interface over which this PPP interface is to be
layered. A value of zero indicates no layering. An implementation
may choose to require that a non-zero valu… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.2 |
| jnxPppMlPppLinkConfigIgnoreMagicNumberMismatch The ignore magic number mismatch option of the PPP interface determines
the action to be taken, when the peer has not negotiated any value yet
sent null or invalid magic number i… | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.20 |
| jnxPppMlPppLinkConfigMultilinkMulticlass Enables Multiclass Multilink PPP (MCML). With read-create maximum
access,changing this object has an effect when the link is next
restarted. | column | Enumeration | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.21 |
| jnxPppMlPppLinkConfigMultilinkMaxMultiClasses Maximum number of MCML classes to be negotiated.With read-create
maximum access,changing this object has an effect when the link
is next restarted. | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.22 |
| jnxPppMlPppLinkConfigAuthentication deprecated Specifies the type(s) of authentication, if any, to be
negotiated with the peer:
none No authentication is negotiated.
pap PAP negotiation only.
chap CHAP n… | column | JnxPppAuthentication | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.5 |
| jnxPppMlPppLinkConfigMaxAuthenRetries The number of authentication retries permitted, in addition to a
failed initial attempt. If all retries fail, the link is reset. | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.6 |
| jnxPppMlPppLinkConfigRowStatus Controls creation/deletion of entries in this table with read-carete
maximum access,according to the RowStatus textual convention,
constrained to support the following values on… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.7 |
| jnxPppMlPppLinkConfigAaaProfile The name of the AAA profile to be used for authentication on the
PPP interface.Setting this object statically binds the AAA profile
with the PPP interface. If this object is not … | column | OctetString | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.8 |
| jnxPppMlPppLinkConfigChapMinChallengeLength Minimum value of the CHAP authenticator challenge length value.
This value is never allowed to be set to a value greater than
jnxPppMlPppLinkConfigChapMaxChallengeLength. | column | Integer32 | .1.3.6.1.4.1.2636.3.68.1.1.6.3.1.9 |