interfaceTopNCaps
INTERFACETOPN-MIB ·
.1.3.6.1.2.1.16.27.1.1
Object
scalar
Bits
The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the
values of ifInOctets, as defined in [RFC2863],
then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUcastPkts, as defined in [RFC2863],
then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInNUcastPkts, as defined in [RFC2863],
then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInDiscards, as defined in [RFC2863],
then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInErrors, as defined in [RFC2863],
then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInUnknownProtocols, as defined in [RFC2863],
then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutOctets, as defined in [RFC2863],
then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutUcastPackets, as defined in [RFC2863],
then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutNUcastPackets, as defined in [RFC2863],
then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutDiscards, as defined in [RFC2863],
then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutErrors, as defined in [RFC2863],
then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInMulticastPkts, as defined in [RFC2863],
then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifInBroadcastPkts, as defined in [RFC2863],
then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutMulticastPkts, as defined in [RFC2863],
then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifOutBroadcastPkts, as defined in [RFC2863],
then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInOctets, as defined in [RFC2863],
then the 'ifHCInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInMulticastPkts, as defined in [RFC2863],
then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCInBroadcastPkts, as defined in [RFC2863],
then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutOctets, as defined in [RFC2863],
then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutUcastPkts, as defined in [RFC2863],
then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutMulticastPkts, as defined in [RFC2863],
then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of ifHCOutBroadcastPkts, as defined in [RFC2863],
then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsAlignmentErrors, as defined in [RFC2665],
then the 'dot3StatsAlignmentErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFCSErrors, as defined in [RFC2665],
then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSingleCollisionFrames, as defined in
[RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSQETestErrors, as defined in [RFC2665],
then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsDeferredTransmissions, as defined in
[RFC2665], then the 'dot3StatsDeferredTransmissions' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsLateCollisions, as defined in [RFC2665],
then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsExcessiveCollisions, as defined in [RFC2665],
then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacTxErrors, as defined in
[RFC2665],then the 'dot3StatsInternalMacTxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsCarrierSenseErrors, as defined in [RFC2665],
then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsFrameTooLongs, as defined in [RFC2665],
then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsInternalMacRxErrors, as defined in
[RFC2665], then the 'dot3StatsInternalMacRxErrors' bit
will be set.
If the agent can perform sorting of interfaces according to the
values of dot3StatsSymbolErrors, as defined in [RFC2665],
then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3InPauseFrames, as defined in [RFC2665],
then the 'dot3InPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot3OutPauseFrames, as defined in [RFC2665],
then the 'dot3OutPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLineErrors, as defined in [RFC1748],
then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsBurstErrors, as defined in [RFC1748],
then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsACErrors, as defined in [RFC1748],
then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsAbortTransErrors, as defined in [RFC1748],
then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsInternalErrors, as defined in [RFC1748],
then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLostFrameErrors, as defined in [RFC1748],
then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsReceiveCongestionErrors, as defined in
[RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFrameCopiedErrors, as defined in [RFC1748],
then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTokenErrors, as defined in [RFC1748],
then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSoftErrors, as defined in [RFC1748],
then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748],
then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSignalLoss, as defined in [RFC1748],
then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsTransmitBeacons, as defined in [RFC1748],
then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the 'dot1dTpPortInDiscards' bit will be set.
Context
- MIB
- INTERFACETOPN-MIB
- OID
.1.3.6.1.2.1.16.27.1.1- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- interfaceTopNObjects
- Siblings
- 2
Syntax
Bits
Values & Constraints
Enumerated Values
0 | ifInOctets |
1 | ifInUcastPkts |
2 | ifInNUcastPkts |
3 | ifInDiscards |
4 | ifInErrors |
5 | ifInUnknownProtos |
6 | ifOutOctets |
7 | ifOutUcastPkts |
8 | ifOutNUcastPkts |
9 | ifOutDiscards |
10 | ifOutErrors |
11 | ifInMulticastPkts |
12 | ifInBroadcastPkts |
13 | ifOutMulticastPkts |
14 | ifOutBroadcastPkts |
15 | ifHCInOctets |
16 | ifHCInUcastPkts |
17 | ifHCInMulticastPkts |
18 | ifHCInBroadcastPkts |
19 | ifHCOutOctets |
20 | ifHCOutUcastPkts |
21 | ifHCOutMulticastPkts |
22 | ifHCOutBroadcastPkts |
23 | dot3StatsAlignmentErrors |
24 | dot3StatsFCSErrors |
25 | dot3StatsSingleCollisionFrames |
26 | dot3StatsMultipleCollisionFrames |
27 | dot3StatsSQETestErrors |
28 | dot3StatsDeferredTransmissions |
29 | dot3StatsLateCollisions |
30 | dot3StatsExcessiveCollisions |
31 | dot3StatsInternalMacTxErrors |
32 | dot3StatsCarrierSenseErrors |
33 | dot3StatsFrameTooLongs |
34 | dot3StatsInternalMacRxErrors |
35 | dot3StatsSymbolErrors |
36 | dot3InPauseFrames |
37 | dot3OutPauseFrames |
38 | dot5StatsLineErrors |
39 | dot5StatsBurstErrors |
40 | dot5StatsACErrors |
41 | dot5StatsAbortTransErrors |
42 | dot5StatsInternalErrors |
43 | dot5StatsLostFrameErrors |
44 | dot5StatsReceiveCongestions |
45 | dot5StatsFrameCopiedErrors |
46 | dot5StatsTokenErrors |
47 | dot5StatsSoftErrors |
48 | dot5StatsHardErrors |
49 | dot5StatsSignalLoss |
50 | dot5StatsTransmitBeacons |
51 | dot5StatsRecoverys |
52 | dot5StatsLobeWires |
53 | dot5StatsRemoves |
54 | dot5StatsSingles |
55 | dot5StatsFreqErrors |
56 | etherStatsDropEvents |
57 | etherStatsOctets |
58 | etherStatsPkts |
59 | etherStatsBroadcastPkts |
60 | etherStatsMulticastPkts |
61 | etherStatsCRCAlignErrors |
62 | etherStatsUndersizePkts |
63 | etherStatsOversizePkts |
64 | etherStatsFragments |
65 | etherStatsJabbers |
66 | etherStatsCollisions |
67 | etherStatsPkts64Octets |
68 | etherStatsPkts65to127Octets |
69 | etherStatsPkts128to255Octets |
70 | etherStatsPkts256to511Octets |
71 | etherStatsPkts512to1023Octets |
72 | etherStatsPkts1024to1518Octets |
73 | dot1dTpPortInFrames |
74 | dot1dTpPortOutFrames |
75 | dot1dTpPortInDiscards |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| interfaceTopNControlTable A table of control records for reports on the top `N'
interfaces for the value or rate of a selected object.
The number of entries depends on the configuration of the agent.
The m… | table | - | .1.3.6.1.2.1.16.27.1.2 |
| interfaceTopNTable A table of reports for the top `N' ports based on
setting of associated control table entries. The
maximum number of entries depends on the number
of entries in table i… | table | - | .1.3.6.1.2.1.16.27.1.3 |