tribPtpCurrNumOfDrops
INFINERA-TP-TRIBPTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.22
Object
column
SNMPv2-SMIInteger32
The count of the number of drops on this trib port
Context
- MIB
- INFINERA-TP-TRIBPTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.22- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tribPtpEntry
- Table
- tribPtpTable
- Siblings
- 36
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tribPtpPgMoId An identifer for the digital SNCP protection. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.1 |
| tribPtpProvisionedServiceType The supported values for this field are determined based on
the circuit pack inserted (and its capabilities). The appropriate
Client CTP object is created based on this value. Cha… | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.10 |
| tribPtpOprOorHighThresholdOffset An offset to the already configured hardware value for the high threshold can be set. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.11 |
| tribPtpOprOorLowThresholdOffset An offset to the already configured hardware value for the low threshold can be set. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.12 |
| tribPtpOprOorAlarmReporting Flag to enable Optical Power Received - Out of Range alarm reporting. | column | INFINERA-TC-MIBInfnReporting | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.13 |
| tribPtpOprOverloadThreshold TRIB port receiver overload threshold. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.14 |
| tribPtpOprSensitivityThreshold TRIB port receiver sensitivity threshold. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.15 |
| tribPtpAINS Flag to enable or disable AINS. | column | INFINERA-TC-MIBInfnOperationalState | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.16 |
| tribPtpValidSignalTimeInterval The valid signal time interval can be configured only when AINS is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.17 |
| tribPtpRemValidSignalTimer The remaining time interval for which AINS is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.18 |
| tribPtpSupportedServiceTypes The list of services that can be supported by the hardware. | column | INFINERA-TC-MIBInfnServiceTypeList | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.19 |
| tribPtpProtMod This attribute represents whether this DTP (as PU or Reliable TP)
is contributing to Single TAM SDNCP or Dual TAM DSNCP. For GTP this
will always be STDSNCP if Protected. For unpr… | column | INFINERA-TC-MIBInfnProtectionMode | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.2 |
| tribPtpPmHistStatsEnable Flag to enable or disable PM collection. | column | INFINERA-TC-MIBInfnPmHistStatsControl | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.20 |
| tribPtpMaxAllowedDrops The maximum number of drops allowed on this trip port. This is decided
based on the type of xcon or snc and dsncp to be created. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.21 |
| tribPtpLocalInterfaceIndex An identifier for the UNI GMPLS Link interface on the local end,
auto-generated by the network element. When the UNI GMPLS Link is
first created, the index is empty. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.23 |
| tribPtpRemoteInterfaceIndex An identifier for the UNI GMPLS Link interface on the remote end. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.24 |
| tribPtpAssocMoInteropCPTEInterface TE interface for UNI. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.25 |
| tribPtpDtpAISOnClientSF Object controls the client failure insertion in the infinera digital path failure. | column | INFINERA-TC-MIBInfnOperationalState | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.26 |
| tribPtpEnetPswLaserCtrl Flag to control the laser of trib port. | column | INFINERA-TC-MIBInfnEnetPswLaserCtrlState | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.27 |
| tribPtpDisableActionOnBERSF Flag to disable trib on DTP signal failure | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.28 |
| tribPtpAutoCableEqualization Auto Cable equalization | column | INFINERA-TC-MIBInfnAutoCableEqualization | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.29 |
| tribPtpCfgProtSt The preferred state of the protection unit. | column | INFINERA-TC-MIBInfnProtectionMode | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.3 |
| tribPtpDirectionality Directionality | column | INFINERA-TC-MIBInfnDirectionality | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.30 |
| tribPtpInterfaceType Interface type | column | INFINERA-TC-MIBInfnInterfaceType | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.31 |
| tribPtpAutoDiscovery ATN DTN Auto Discovery | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.32 |
| tribPtpDiscoveredRemoteTP ATN DTN DiscoveredRemote TP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.33 |
| tribPtpProvisionedRemoteTP ATN DTN Provisioned Remote TP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.34 |
| tribPtpForwardDefectTDATrigger Egress Trib Disable Action | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.35 |
| tribPtpProvisionedFecEncodingMode Provisioned FEC Encoding | column | INFINERA-TC-MIBInfnFecEncodingMode | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.36 |
| tribPtpAppliedFecEncodingMode Applied FEC Encoding | column | INFINERA-TC-MIBInfnFecEncodingMode | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.37 |
| tribPtpCurProtSt The actual state of the protection unit. | column | INFINERA-TC-MIBInfnCurrProtState | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.4 |
| tribPtpPsDirn Protection switch direction (unidirectional or bidirectional) of the
protection group. | column | INFINERA-TC-MIBInfnPsDirn | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.5 |
| tribPtpSwReason The reason for the protection switch. | column | INFINERA-TC-MIBInfnSwitchReason | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.6 |
| tribPtpSwRqState Indicates the protection switch request state of the protecting
protection unit. | column | INFINERA-TC-MIBInfnSwitchRequestState | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.7 |
| tribPtpMaxPerChannelCapacity The maximum channel capacity of the signal port of the TOM. | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.8 |
| tribPtpTribDisableAction This attribute indicates the action taken on the
trib/facility side when the line-side is not receiving valid
signal. Any loss of signal trigger this action. Similarly, a
valid si… | column | INFINERA-TC-MIBInfnTribAction | .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.9 |