tribPtpAutoDiscovery

INFINERA-TP-TRIBPTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.17.1.1.32
MIB view Table view

Object

column r/w INFINERA-TC-MIBInfnEnableDisable 
ATN DTN Auto Discovery

Context

MIB
INFINERA-TP-TRIBPTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.32
Type
column
Access
readwrite
Status
current
Parent
tribPtpEntry
Table
tribPtpTable
Siblings
36

Syntax

INFINERA-TC-MIBInfnEnableDisable
Source
INFINERA-TC-MIBInfnEnableDisable
Base type
Enumeration

Values & Constraints

Type Values
1disabled
2enabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tribPtpPgMoId
An identifer for the digital SNCP protection.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.1
tribPtpProvisionedServiceType
The supported values for this field are determined based on the circuit pack inserted (and its capabilities). The appropriate Client CTP object is created based on this value. Cha…
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.10
tribPtpOprOorHighThresholdOffset
An offset to the already configured hardware value for the high threshold can be set.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.11
tribPtpOprOorLowThresholdOffset
An offset to the already configured hardware value for the low threshold can be set.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.12
tribPtpOprOorAlarmReporting
Flag to enable Optical Power Received - Out of Range alarm reporting.
columnINFINERA-TC-MIBInfnReporting.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.13
tribPtpOprOverloadThreshold
TRIB port receiver overload threshold.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.14
tribPtpOprSensitivityThreshold
TRIB port receiver sensitivity threshold.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.15
tribPtpAINS
Flag to enable or disable AINS.
columnINFINERA-TC-MIBInfnOperationalState.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.16
tribPtpValidSignalTimeInterval
The valid signal time interval can be configured only when AINS is enabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.17
tribPtpRemValidSignalTimer
The remaining time interval for which AINS is enabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.18
tribPtpSupportedServiceTypes
The list of services that can be supported by the hardware.
columnINFINERA-TC-MIBInfnServiceTypeList.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.19
tribPtpProtMod
This attribute represents whether this DTP (as PU or Reliable TP) is contributing to Single TAM SDNCP or Dual TAM DSNCP. For GTP this will always be STDSNCP if Protected. For unpr…
columnINFINERA-TC-MIBInfnProtectionMode.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.2
tribPtpPmHistStatsEnable
Flag to enable or disable PM collection.
columnINFINERA-TC-MIBInfnPmHistStatsControl.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.20
tribPtpMaxAllowedDrops
The maximum number of drops allowed on this trip port. This is decided based on the type of xcon or snc and dsncp to be created.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.21
tribPtpCurrNumOfDrops
The count of the number of drops on this trib port
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.22
tribPtpLocalInterfaceIndex
An identifier for the UNI GMPLS Link interface on the local end, auto-generated by the network element. When the UNI GMPLS Link is first created, the index is empty.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.23
tribPtpRemoteInterfaceIndex
An identifier for the UNI GMPLS Link interface on the remote end.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.24
tribPtpAssocMoInteropCPTEInterface
TE interface for UNI.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.25
tribPtpDtpAISOnClientSF
Object controls the client failure insertion in the infinera digital path failure.
columnINFINERA-TC-MIBInfnOperationalState.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.26
tribPtpEnetPswLaserCtrl
Flag to control the laser of trib port.
columnINFINERA-TC-MIBInfnEnetPswLaserCtrlState.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.27
tribPtpDisableActionOnBERSF
Flag to disable trib on DTP signal failure
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.28
tribPtpAutoCableEqualization
Auto Cable equalization
columnINFINERA-TC-MIBInfnAutoCableEqualization.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.29
tribPtpCfgProtSt
The preferred state of the protection unit.
columnINFINERA-TC-MIBInfnProtectionMode.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.3
tribPtpDirectionality
Directionality
columnINFINERA-TC-MIBInfnDirectionality.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.30
tribPtpInterfaceType
Interface type
columnINFINERA-TC-MIBInfnInterfaceType.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.31
tribPtpDiscoveredRemoteTP
ATN DTN DiscoveredRemote TP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.33
tribPtpProvisionedRemoteTP
ATN DTN Provisioned Remote TP
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.34
tribPtpForwardDefectTDATrigger
Egress Trib Disable Action
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.35
tribPtpProvisionedFecEncodingMode
Provisioned FEC Encoding
columnINFINERA-TC-MIBInfnFecEncodingMode.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.36
tribPtpAppliedFecEncodingMode
Applied FEC Encoding
columnINFINERA-TC-MIBInfnFecEncodingMode.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.37
tribPtpCurProtSt
The actual state of the protection unit.
columnINFINERA-TC-MIBInfnCurrProtState.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.4
tribPtpPsDirn
Protection switch direction (unidirectional or bidirectional) of the protection group.
columnINFINERA-TC-MIBInfnPsDirn.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.5
tribPtpSwReason
The reason for the protection switch.
columnINFINERA-TC-MIBInfnSwitchReason.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.6
tribPtpSwRqState
Indicates the protection switch request state of the protecting protection unit.
columnINFINERA-TC-MIBInfnSwitchRequestState.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.7
tribPtpMaxPerChannelCapacity
The maximum channel capacity of the signal port of the TOM.
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.8
tribPtpTribDisableAction
This attribute indicates the action taken on the trib/facility side when the line-side is not receiving valid signal. Any loss of signal trigger this action. Similarly, a valid si…
columnINFINERA-TC-MIBInfnTribAction.1.3.6.1.4.1.21296.2.2.2.2.17.1.1.9