oduktClientCtpTxTTI
INFINERA-TP-ODUKTCLIENTCTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.8
Object
column
r/w
OctetString
The TTI message that needs to be transmitted from Trib to Line direction. This message is inserted only when the TribInsertTTI field is set to Enabled.
Context
- MIB
- INFINERA-TP-ODUKTCLIENTCTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oduktClientCtpEntry
- Table
- oduktClientCtpTable
- Siblings
- 25
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oduktClientCtpTcmIdentifier The TCM field identifier for this Tandem Connection Monitoring point.
This TCM identifier is used along with the Side identifier to explicitly formulate the AID of the
ODUkT Cli… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.1 |
| oduktClientCtpExpectedDAPI The Destination Access Point Identifier that is expected in the Trib to Line direction. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.10 |
| oduktClientCtpTimDetMode This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message.
The following are the values and their meaning:
OFF:… | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.11 |
| oduktClientCtpReceivedTTI The TTI message received from the side indicated by the AID of the ODUkT CTP. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.12 |
| oduktClientCtpPmHistStatsEnable Flag to enable or disable the collection of PMs on the side indicated by the AID of the ODUkT CTP. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.13 |
| oduktClientCtpRxEb15MinutesTce Number of Error Block in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.14 |
| oduktClientCtpRxEbDayTce Number of Error Block in received direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.15 |
| oduktClientCtpRxDs15MinutesTce Number of Defect Seconds in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.16 |
| oduktClientCtpRxDsDayTce Number of Defect Seconds in receive direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.17 |
| oduktClientCtpRxEbDayTceReporting Flag that enables/disables the reporting of RxEbDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.18 |
| oduktClientCtpRxEb15MinutesTceReporting Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.19 |
| oduktClientCtpSide TThe TCM Side identifier for this Tandem Connection Monitoring point.
This TCM Side identifier is used along with the TCM identifier to explicitly formulate the AID of the
ODUkT… | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.2 |
| oduktClientCtpRxDsDayTceReporting Flag that enables/disables the reporting of RxDsDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.20 |
| oduktClientCtpRxDs15MinutesTceReporting Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.21 |
| oduktClientCtpSDThreshold This attribute indicates the threshold level for declaring a Degraded Signal defect.
A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are det… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.22 |
| oduktClientCtpRxBei15MinutesTce This attribute indicates the threshold level for Received BEI counts for 15Min-interval | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.23 |
| oduktClientCtpRxBeiDayTce This attribute indicates the threshold level for Received BEI counts for day-interval | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.24 |
| oduktClientCtpRxBei15MinutesTceReporting Flag that enables/disables the reporting of RxBei15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.25 |
| oduktClientCtpRxBeiDayTceReporting Flag that enables/disables the reporting of RxBeiDay Tce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.26 |
| oduktClientCtpConfiguredServiceType The ODU Service type that is configured on this generic OduClientCtp managed object. | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.3 |
| oduktClientCtpAlarmReportControl The Alarm Reporting Control Flag for the ODUkT Clients. | column | INFINERA-TC-MIBInfnArc | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.4 |
| oduktClientCtpSupportingCircuitIdList The Supporting Circuit ID List that is this client is using. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.5 |
| oduktClientCtpMonitoringMode Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side). | column | INFINERA-TC-MIBInfnMonitoringMode | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.6 |
| oduktClientCtpDSThreshold This attribute indicates the threshold level for declaring a performance monitoring (PM) Second to be bad.
A PM Second is declared bad if the percentage of detected error blocks i… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.7 |
| oduktClientCtpExpectedSAPI The Source Access Point Identifier that is expected in the Trib to Line direction. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.9 |