oduktClientCtpConfiguredServiceType

INFINERA-TP-ODUKTCLIENTCTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.24.1.1.3
MIB view Table view

Object

column INFINERA-TC-MIBInfnServiceType 
The ODU Service type that is configured on this generic OduClientCtp managed object.

Context

MIB
INFINERA-TP-ODUKTCLIENTCTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.3
Type
column
Access
readonly
Status
current
Parent
oduktClientCtpEntry
Table
oduktClientCtpTable
Siblings
25

Syntax

INFINERA-TC-MIBInfnServiceType
Source
INFINERA-TC-MIBInfnServiceType
Base type
Enumeration

Values & Constraints

Type Values
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
119bwOtuAdapti
120bwOduAdapti

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oduktClientCtpTcmIdentifier
The TCM field identifier for this Tandem Connection Monitoring point. This TCM identifier is used along with the Side identifier to explicitly formulate the AID of the ODUkT Cli…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.1
oduktClientCtpExpectedDAPI
The Destination Access Point Identifier that is expected in the Trib to Line direction.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.10
oduktClientCtpTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning: OFF:…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.11
oduktClientCtpReceivedTTI
The TTI message received from the side indicated by the AID of the ODUkT CTP.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.12
oduktClientCtpPmHistStatsEnable
Flag to enable or disable the collection of PMs on the side indicated by the AID of the ODUkT CTP.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.13
oduktClientCtpRxEb15MinutesTce
Number of Error Block in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.14
oduktClientCtpRxEbDayTce
Number of Error Block in received direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.15
oduktClientCtpRxDs15MinutesTce
Number of Defect Seconds in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.16
oduktClientCtpRxDsDayTce
Number of Defect Seconds in receive direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.17
oduktClientCtpRxEbDayTceReporting
Flag that enables/disables the reporting of RxEbDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.18
oduktClientCtpRxEb15MinutesTceReporting
Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.19
oduktClientCtpSide
TThe TCM Side identifier for this Tandem Connection Monitoring point. This TCM Side identifier is used along with the TCM identifier to explicitly formulate the AID of the ODUkT…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.2
oduktClientCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.20
oduktClientCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.21
oduktClientCtpSDThreshold
This attribute indicates the threshold level for declaring a Degraded Signal defect. A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are det…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.22
oduktClientCtpRxBei15MinutesTce
This attribute indicates the threshold level for Received BEI counts for 15Min-interval
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.23
oduktClientCtpRxBeiDayTce
This attribute indicates the threshold level for Received BEI counts for day-interval
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.24
oduktClientCtpRxBei15MinutesTceReporting
Flag that enables/disables the reporting of RxBei15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.25
oduktClientCtpRxBeiDayTceReporting
Flag that enables/disables the reporting of RxBeiDay Tce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.26
oduktClientCtpAlarmReportControl
The Alarm Reporting Control Flag for the ODUkT Clients.
columnINFINERA-TC-MIBInfnArc.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.4
oduktClientCtpSupportingCircuitIdList
The Supporting Circuit ID List that is this client is using.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.5
oduktClientCtpMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.6
oduktClientCtpDSThreshold
This attribute indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected error blocks i…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.7
oduktClientCtpTxTTI
The TTI message that needs to be transmitted from Trib to Line direction. This message is inserted only when the TribInsertTTI field is set to Enabled.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.8
oduktClientCtpExpectedSAPI
The Source Access Point Identifier that is expected in the Trib to Line direction.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.24.1.1.9