olmRowStatus
INFINERA-ENTITY-OLM-MIB ·
.1.3.6.1.4.1.21296.2.2.2.1.25.1.1.9
Object
The row status of this OLM entry.
Because rows in this table are indexed by entPhysicalIndex, to create a new row one must
choose a value of entPhysicalIndex that is not already in use.
A side-effect of the creation of a row in this table is the creation of a corresponding
row in the eqptTable and the entPhysicalTable.
The status may not be set to active if the olmMoId and olmProvEqptType are not set to valid values.
This row may only be deleted if it was a pre-provisioned row and the hardware is not present.
If this row is deleted, the associated row in the Eqpt Table and entPhysicalTable will be
deleted by the agent.
Context
- MIB
- INFINERA-ENTITY-OLM-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.1.25.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- olmEntry
- Table
- olmTable
- Siblings
- 20
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| olmMoId This is the primary Key of the objects | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.1 |
| actvTimingSource | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.10 |
| olmRxEdfaGain | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.11 |
| olmRxEdfaOutputTargetPower | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.12 |
| olmDefFlexLicModformat This objects controls the operating mode for OLM and DLM in Gen1 and Gen2 modes. | column | INFINERA-TC-MIBInfnOlmDefFlexLicModformat | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.13 |
| olmBwQmax | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.14 |
| olmBwQused | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.15 |
| olmBwQlicensed | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.16 |
| olmBwBmax | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.17 |
| olmBwBused | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.18 |
| olmBwBlicensed | column | INFINERA-TC-MIBFloatThousandths | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.19 |
| olmProvEqptType The configured OLM type. | column | INFINERA-TC-MIBInfnEqptType | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.2 |
| olmOTNContainerRepresentation | column | INFINERA-TC-MIBInfnOtnOtuType | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.20 |
| olmInstalledOTNContainerRepresentation | column | INFINERA-TC-MIBInfnOtnOtuType | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.21 |
| olmOperatingMode This objects controls the operating mode for OLM and DLM in Gen1 and Gen2 modes. | column | INFINERA-TC-MIBInfnOperatingMode | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.3 |
| olmAvailableTunableOcgNumbers | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.4 |
| olmTunableOcgNumber | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.5 |
| olmCurOcgNumber | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.6 |
| olmPicDspVer The hardware version of the PIC on the OLM. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.7 |
| olmOcgNumber This represents the OCG number for which tunable line module will be tuned. | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.1.25.1.1.8 |