dot11StationID

IEEE802dot11-MIB · .1.2.840.10036.1.1.1.1
MIB view Table view

Object

column deprecated r/w SNMPv2-TCMacAddress 
The purpose of dot11StationID is to allow a manager to 
identify a station for its own purposes.  This attribute
provides for that eventuality while keeping the true MAC
address independent.  Its syntax is MAC address, and the
default value is the station's assigned, unique 
MAC address.

Context

MIB
IEEE802dot11-MIB
OID
.1.2.840.10036.1.1.1.1
Type
column
Access
readwrite
Status
deprecated
Parent
dot11StationConfigEntry
Table
dot11StationConfigTable
Siblings
22

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dot11DesiredBSSType
This attribute shall specify the type of BSS the station shall use when scanning for a BSS with which to synchronize. This value is used to filter Probe Response frames and Beac…
columnEnumeration.1.2.840.10036.1.1.1.10
dot11OperationalRateSet
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the rang…
columnOctetString.1.2.840.10036.1.1.1.11
dot11BeaconPeriod
This attribute shall specify the number of TUs that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
columnInteger32.1.2.840.10036.1.1.1.12
dot11DTIMPeriod
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This val…
columnInteger32.1.2.840.10036.1.1.1.13
dot11AssociationResponseTimeOut
This attribute shall specify the number of TU that a requesting STA should wait for a response to a transmitted association-request MMPDU.
columnUnsigned32.1.2.840.10036.1.1.1.14
dot11DisassociateReason
This attribute holds the most recently transmitted Reason Code in a Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0.
columnInteger32.1.2.840.10036.1.1.1.15
dot11DisassociateStation
This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disassociation frame has been transmitted, the value of…
columnSNMPv2-TCMacAddress.1.2.840.10036.1.1.1.16
dot11DeauthenticateReason
This attribute holds the most recently transmitted Reason Code in a Deauthentication frame. If no Deauthentication frame has been transmitted, the value of this attribute shall b…
columnInteger32.1.2.840.10036.1.1.1.17
dot11DeauthenticateStation
This attribute holds the MAC address from the Address 1 field of the most recently transmitted Deauthentication frame. If no Deauthentication frame has been transmitted, the valu…
columnSNMPv2-TCMacAddress.1.2.840.10036.1.1.1.18
dot11AuthenticateFailStatus
This attribute holds the most recently transmitted Status Code in a failed Authentication frame. If no failed Authentication frame has been transmitted, the value of this attribu…
columnInteger32.1.2.840.10036.1.1.1.19
dot11MediumOccupancyLimit
This attribute shall indicate the maximum amount of time, in TU, that a point coordinator (PC) may control the usage of the wireless medium (WM) without relinquishing control fo…
columnInteger32.1.2.840.10036.1.1.1.2
dot11AuthenticateFailStation
This attribute holds the MAC address from the Address 1 field of the most recently transmitted failed Authentication frame. If no failed Authentication frame has been transmitted…
columnSNMPv2-TCMacAddress.1.2.840.10036.1.1.1.20
dot11MultiDomainCapabilityImplemented
This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default …
columnSNMPv2-TCTruthValue.1.2.840.10036.1.1.1.21
dot11MultiDomainCapabilityEnabled
This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The defau…
columnSNMPv2-TCTruthValue.1.2.840.10036.1.1.1.22
dot11CountryString
This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC …
columnOctetString.1.2.840.10036.1.1.1.23
dot11CFPollable
When this attribute is true, it shall indicate that the STA is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the STA is no…
columnSNMPv2-TCTruthValue.1.2.840.10036.1.1.1.3
dot11CFPPeriod
The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive.
columnInteger32.1.2.840.10036.1.1.1.4
dot11CFPMaxDuration
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
columnInteger32.1.2.840.10036.1.1.1.5
dot11AuthenticationResponseTimeOut
This attribute shall specify the number of time units (TUs) that a responding STA should wait for the next frame in the authentication sequence.
columnUnsigned32.1.2.840.10036.1.1.1.6
dot11PrivacyOptionImplemented
This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute shall be false.
columnSNMPv2-TCTruthValue.1.2.840.10036.1.1.1.7
dot11PowerManagementMode
This attribute shall specify the power management mode of the STA. When set to active, it shall indicate that the station is not in power-save (PS) mode. When set to powersave, …
columnEnumeration.1.2.840.10036.1.1.1.8
dot11DesiredSSID
This attribute reflects the Service Set ID (SSID) used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external management ent…
columnOctetString.1.2.840.10036.1.1.1.9