dot11OperationalRateSet
IEEE802dot11-MIB ·
.1.2.840.10036.1.1.1.11
Object
column
r/w
OctetString
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
Context
- MIB
- IEEE802dot11-MIB
- OID
.1.2.840.10036.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot11StationConfigEntry
- Table
- dot11StationConfigTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-126
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot11StationID deprecated The purpose of dot11StationID is to allow a manager to
identify a station for its own purposes. This attribute
provides for that eventuality while keeping the true MAC
address i… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.1 |
| dot11DesiredBSSType This attribute shall specify the type of BSS the
station shall use when scanning for a BSS with
which to synchronize. This value is used to filter
Probe Response frames and Beac… | column | Enumeration | .1.2.840.10036.1.1.1.10 |
| dot11BeaconPeriod This attribute shall specify the number of TUs that
a station shall use for scheduling Beacon
transmissions. This value is transmitted in Beacon
and Probe Response frames. | column | Integer32 | .1.2.840.10036.1.1.1.12 |
| dot11DTIMPeriod This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This val… | column | Integer32 | .1.2.840.10036.1.1.1.13 |
| dot11AssociationResponseTimeOut This attribute shall specify the number of TU that a
requesting STA should wait for a response to a
transmitted association-request MMPDU. | column | Unsigned32 | .1.2.840.10036.1.1.1.14 |
| dot11DisassociateReason This attribute holds the most recently
transmitted Reason Code in a Disassociation
frame. If no Disassociation frame has been
transmitted, the value of this attribute shall
be 0. | column | Integer32 | .1.2.840.10036.1.1.1.15 |
| dot11DisassociateStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
Disassociation frame. If no Disassociation
frame has been transmitted, the value of… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.16 |
| dot11DeauthenticateReason This attribute holds the most recently
transmitted Reason Code in a Deauthentication
frame. If no Deauthentication frame has been
transmitted, the value of this attribute shall
b… | column | Integer32 | .1.2.840.10036.1.1.1.17 |
| dot11DeauthenticateStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
Deauthentication frame. If no Deauthentication
frame has been transmitted, the valu… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.18 |
| dot11AuthenticateFailStatus This attribute holds the most recently
transmitted Status Code in a failed
Authentication frame. If no failed
Authentication frame has been transmitted, the
value of this attribu… | column | Integer32 | .1.2.840.10036.1.1.1.19 |
| dot11MediumOccupancyLimit This attribute shall indicate the maximum amount of time,
in TU, that a point coordinator (PC) may control the usage
of the wireless medium (WM) without relinquishing control
fo… | column | Integer32 | .1.2.840.10036.1.1.1.2 |
| dot11AuthenticateFailStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
failed Authentication frame. If no failed
Authentication frame has been transmitted… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.20 |
| dot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the
station implementation is capable of supporting
multiple regulatory domains. The capability is
disabled, otherwise. The default … | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.21 |
| dot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the
capability of the station to operate in multiple
regulatory domains is enabled. The capability is
disabled, otherwise. The defau… | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.22 |
| dot11CountryString This attribute identifies the country in which the
station is operating. The first two octets of this
string is the two character country code as described
in document ISO/IEC … | column | OctetString | .1.2.840.10036.1.1.1.23 |
| dot11CFPollable When this attribute is true, it shall indicate that
the STA is able to respond to a CF-Poll with a data frame
within a SIFS time. This attribute shall be false if
the STA is no… | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.3 |
| dot11CFPPeriod The attribute shall describe the number of DTIM intervals
between the start of CFPs. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.2.840.10036.1.1.1.4 |
| dot11CFPMaxDuration The attribute shall describe the maximum duration of
the CFP in TU that may be generated by the PCF. It is
modified by MLME-START.request primitive. | column | Integer32 | .1.2.840.10036.1.1.1.5 |
| dot11AuthenticationResponseTimeOut This attribute shall specify the number of time units (TUs)
that a responding STA should wait for the next frame in the
authentication sequence. | column | Unsigned32 | .1.2.840.10036.1.1.1.6 |
| dot11PrivacyOptionImplemented This attribute, when true, shall indicate that the IEEE
802.11 WEP option is implemented. The default value of
this attribute shall be false. | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.7 |
| dot11PowerManagementMode This attribute shall specify the power management
mode of the STA. When set to active, it shall
indicate that the station is not in power-save
(PS) mode. When set to powersave, … | column | Enumeration | .1.2.840.10036.1.1.1.8 |
| dot11DesiredSSID This attribute reflects the Service Set ID (SSID)
used in the DesiredSSID parameter of the most recent
MLME_Scan.request. This value may be modified
by an external management ent… | column | OctetString | .1.2.840.10036.1.1.1.9 |