dot11CFPMaxDuration
IEEE802dot11-MIB ·
.1.2.840.10036.1.1.1.5
Object
column
r/w
Integer32
The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive.
Context
- MIB
- IEEE802dot11-MIB
- OID
.1.2.840.10036.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot11StationConfigEntry
- Table
- dot11StationConfigTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot11StationID deprecated The purpose of dot11StationID is to allow a manager to
identify a station for its own purposes. This attribute
provides for that eventuality while keeping the true MAC
address i… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.1 |
| dot11DesiredBSSType This attribute shall specify the type of BSS the
station shall use when scanning for a BSS with
which to synchronize. This value is used to filter
Probe Response frames and Beac… | column | Enumeration | .1.2.840.10036.1.1.1.10 |
| dot11OperationalRateSet This attribute shall specify the set of data
rates at which the station may transmit data.
Each octet contains a value representing a rate.
Each rate shall be within the rang… | column | OctetString | .1.2.840.10036.1.1.1.11 |
| dot11BeaconPeriod This attribute shall specify the number of TUs that
a station shall use for scheduling Beacon
transmissions. This value is transmitted in Beacon
and Probe Response frames. | column | Integer32 | .1.2.840.10036.1.1.1.12 |
| dot11DTIMPeriod This attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This val… | column | Integer32 | .1.2.840.10036.1.1.1.13 |
| dot11AssociationResponseTimeOut This attribute shall specify the number of TU that a
requesting STA should wait for a response to a
transmitted association-request MMPDU. | column | Unsigned32 | .1.2.840.10036.1.1.1.14 |
| dot11DisassociateReason This attribute holds the most recently
transmitted Reason Code in a Disassociation
frame. If no Disassociation frame has been
transmitted, the value of this attribute shall
be 0. | column | Integer32 | .1.2.840.10036.1.1.1.15 |
| dot11DisassociateStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
Disassociation frame. If no Disassociation
frame has been transmitted, the value of… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.16 |
| dot11DeauthenticateReason This attribute holds the most recently
transmitted Reason Code in a Deauthentication
frame. If no Deauthentication frame has been
transmitted, the value of this attribute shall
b… | column | Integer32 | .1.2.840.10036.1.1.1.17 |
| dot11DeauthenticateStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
Deauthentication frame. If no Deauthentication
frame has been transmitted, the valu… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.18 |
| dot11AuthenticateFailStatus This attribute holds the most recently
transmitted Status Code in a failed
Authentication frame. If no failed
Authentication frame has been transmitted, the
value of this attribu… | column | Integer32 | .1.2.840.10036.1.1.1.19 |
| dot11MediumOccupancyLimit This attribute shall indicate the maximum amount of time,
in TU, that a point coordinator (PC) may control the usage
of the wireless medium (WM) without relinquishing control
fo… | column | Integer32 | .1.2.840.10036.1.1.1.2 |
| dot11AuthenticateFailStation This attribute holds the MAC address from the
Address 1 field of the most recently transmitted
failed Authentication frame. If no failed
Authentication frame has been transmitted… | column | SNMPv2-TCMacAddress | .1.2.840.10036.1.1.1.20 |
| dot11MultiDomainCapabilityImplemented This attribute, when TRUE, indicates that the
station implementation is capable of supporting
multiple regulatory domains. The capability is
disabled, otherwise. The default … | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.21 |
| dot11MultiDomainCapabilityEnabled This attribute, when TRUE, indicates that the
capability of the station to operate in multiple
regulatory domains is enabled. The capability is
disabled, otherwise. The defau… | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.22 |
| dot11CountryString This attribute identifies the country in which the
station is operating. The first two octets of this
string is the two character country code as described
in document ISO/IEC … | column | OctetString | .1.2.840.10036.1.1.1.23 |
| dot11CFPollable When this attribute is true, it shall indicate that
the STA is able to respond to a CF-Poll with a data frame
within a SIFS time. This attribute shall be false if
the STA is no… | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.3 |
| dot11CFPPeriod The attribute shall describe the number of DTIM intervals
between the start of CFPs. It is modified by
MLME-START.request primitive. | column | Integer32 | .1.2.840.10036.1.1.1.4 |
| dot11AuthenticationResponseTimeOut This attribute shall specify the number of time units (TUs)
that a responding STA should wait for the next frame in the
authentication sequence. | column | Unsigned32 | .1.2.840.10036.1.1.1.6 |
| dot11PrivacyOptionImplemented This attribute, when true, shall indicate that the IEEE
802.11 WEP option is implemented. The default value of
this attribute shall be false. | column | SNMPv2-TCTruthValue | .1.2.840.10036.1.1.1.7 |
| dot11PowerManagementMode This attribute shall specify the power management
mode of the STA. When set to active, it shall
indicate that the station is not in power-save
(PS) mode. When set to powersave, … | column | Enumeration | .1.2.840.10036.1.1.1.8 |
| dot11DesiredSSID This attribute reflects the Service Set ID (SSID)
used in the DesiredSSID parameter of the most recent
MLME_Scan.request. This value may be modified
by an external management ent… | column | OctetString | .1.2.840.10036.1.1.1.9 |