dot1agCfmMepFngAlarmTime
IEEE8021-CFM-MIB ·
.1.3.111.2.802.1.1.8.1.7.1.1.11
Object
column
r/w
Integer32
The time that defects MUST be present before a Fault Alarm is issued (fngAlarmTime, 20.3.3) (default 2.5s).
Context
- MIB
- IEEE8021-CFM-MIB
- OID
.1.3.111.2.802.1.1.8.1.7.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot1agCfmMepEntry
- Table
- dot1agCfmMepTable
- Siblings
- 50
Syntax
Integer32
Values & Constraints
Object Constraints
range: 250-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot1agCfmMepIdentifier Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
ass… | column | Dot1agCfmMepId | .1.3.111.2.802.1.1.8.1.7.1.1.1 |
| dot1agCfmMepLowPrDef An integer value specifying the lowest priority defect
that is allowed to generate fault alarm. | column | Dot1agCfmLowestAlarmPri | .1.3.111.2.802.1.1.8.1.7.1.1.10 |
| dot1agCfmMepFngResetTime The time that defects MUST be absent before resetting a
Fault Alarm (fngResetTime, 20.35.4) (default 10s). | column | Integer32 | .1.3.111.2.802.1.1.8.1.7.1.1.12 |
| dot1agCfmMepHighestPrDefect The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state. | column | Dot1agCfmHighestDefectPri | .1.3.111.2.802.1.1.8.1.7.1.1.13 |
| dot1agCfmMepDefects A vector of Boolean error conditions from Table 20-1, any of
which may be true:
DefRDICCM(0)
DefMACstatus(1)
DefRemoteCCM(2)
DefErrorCCM(3)
DefXconCCM(4) | column | Dot1agCfmMepDefects | .1.3.111.2.802.1.1.8.1.7.1.1.14 |
| dot1agCfmMepErrorCcmLastFailure The last-received CCM that triggered an DefErrorCCM fault. | column | OctetString | .1.3.111.2.802.1.1.8.1.7.1.1.15 |
| dot1agCfmMepXconCcmLastFailure The last-received CCM that triggered a DefXconCCM fault. | column | OctetString | .1.3.111.2.802.1.1.8.1.7.1.1.16 |
| dot1agCfmMepCcmSequenceErrors The total number of out-of-sequence CCMs received from all
remote MEPs. | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.17 |
| dot1agCfmMepCciSentCcms Total number of Continuity Check messages transmitted. | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.18 |
| dot1agCfmMepNextLbmTransId Next sequence number/transaction identifier to be sent in a
Loopback message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.19 |
| dot1agCfmMepIfIndex This object is the interface index of the interface either a
Bridge Port, or an aggregated IEEE 802.1 link within a Bridge
port, to which the MEP is attached.
Upon … | column | IF-MIBInterfaceIndexOrZero | .1.3.111.2.802.1.1.8.1.7.1.1.2 |
| dot1agCfmMepLbrIn Total number of valid, in-order Loopback Replies received. | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.20 |
| dot1agCfmMepLbrInOutOfOrder The total number of valid, out-of-order Loopback Replies
received. | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.21 |
| dot1agCfmMepLbrBadMsdu The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3). | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.22 |
| dot1agCfmMepLtmNextSeqNumber Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around. | column | SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.23 |
| dot1agCfmMepUnexpLtrIn The total number of unexpected LTRs received (20.39.1). | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.24 |
| dot1agCfmMepLbrOut Total number of Loopback Replies transmitted. | column | SNMPv2-SMICounter32 | .1.3.111.2.802.1.1.8.1.7.1.1.25 |
| dot1agCfmMepTransmitLbmStatus A Boolean flag set to true by the MEP Loopback Initiator State
Machine or an MIB manager to indicate
that another LBM is being transmitted.
Reset to false by the MEP Loopback Init… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.26 |
| dot1agCfmMepTransmitLbmDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId is 'fals… | column | SNMPv2-TCMacAddress | .1.3.111.2.802.1.1.8.1.7.1.1.27 |
| dot1agCfmMepTransmitLbmDestMepId The Maintenance association Endpoint Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the co… | column | Dot1agCfmMepIdOrZero | .1.3.111.2.802.1.1.8.1.7.1.1.28 |
| dot1agCfmMepTransmitLbmDestIsMepId True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmis… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.29 |
| dot1agCfmMepDirection The direction in which the MEP faces on the Bridge port. | column | Dot1agCfmMpDirection | .1.3.111.2.802.1.1.8.1.7.1.1.3 |
| dot1agCfmMepTransmitLbmMessages The number of Loopback messages to be transmitted. | column | Integer32 | .1.3.111.2.802.1.1.8.1.7.1.1.30 |
| dot1agCfmMepTransmitLbmDataTlv An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent. The intent is to be able
to fill the frame carrying the CFM PDU to its maximum… | column | OctetString | .1.3.111.2.802.1.1.8.1.7.1.1.31 |
| dot1agCfmMepTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.
The default value is CCM priority. | column | Integer32 | .1.3.111.2.802.1.1.8.1.7.1.1.32 |
| dot1agCfmMepTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.
For more information about VLAN Drop Enable, check
IEEE Std 802.1ad. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.33 |
| dot1agCfmMepTransmitLbmResultOK Indicates the result of the operation:
- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.34 |
| dot1agCfmMepTransmitLbmSeqNumber The Loopback Transaction Identifier
(dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
dot1agCfmMepTransmitLbmResultOK is false. | column | SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.35 |
| dot1agCfmMepTransmitLtmStatus A Boolean flag set to true by the Bridge Port to indicate
that another LTM may be transmitted.
Reset to false by the MEP Linktrace Initiator State Machine. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.36 |
| dot1agCfmMepTransmitLtmFlags The flags field for LTMs transmitted by the MEP. | column | Bits | .1.3.111.2.802.1.1.8.1.7.1.1.37 |
| dot1agCfmMepTransmitLtmTargetMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLtmTargetIsMepId is 'fa… | column | SNMPv2-TCMacAddress | .1.3.111.2.802.1.1.8.1.7.1.1.38 |
| dot1agCfmMepTransmitLtmTargetMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association Endpoint Identifier of
another MEP in the same Maintenance Association
This address wi… | column | Dot1agCfmMepIdOrZero | .1.3.111.2.802.1.1.8.1.7.1.1.39 |
| dot1agCfmMepPrimaryVid An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or t… | column | Unsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.4 |
| dot1agCfmMepTransmitLtmTargetIsMepId True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.40 |
| dot1agCfmMepTransmitLtmTtl The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
hand… | column | Unsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.41 |
| dot1agCfmMepTransmitLtmResult Indicates the result of the operation:
- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.42 |
| dot1agCfmMepTransmitLtmSeqNumber The LTM Transaction Identifier
(dot1agCfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
dot1agCfmMepTransmitLtmResult is false. | column | SNMPv2-SMIUnsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.43 |
| dot1agCfmMepTransmitLtmEgressIdentifier Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
uni… | column | OctetString | .1.3.111.2.802.1.1.8.1.7.1.1.44 |
| dot1agCfmMepRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active. All columns MUST have a valid value before a row
can be activated. | column | SNMPv2-TCRowStatus | .1.3.111.2.802.1.1.8.1.7.1.1.45 |
| dot1agCfmMepPbbTeCanReportPbbTePresence A Boolean valued parameter that is set to true if the system
has the capability to report the presence of traffic and that
the capability is enabled. Traffic presence reporting is… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.46 |
| dot1agCfmMepPbbTeTrafficMismatchDefect A Boolean valued parameter that is set to true if the system
has detected a traffic field mismatch defect. Mismatch detection
is an optional PBB-TE feature. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.47 |
| dot1agCfmMepPbbTransmitLbmLtmReverseVid This column specifies the value to use in the Reverse VID value
field of PBB-TE MIP TLVs contained within TransmitLTM pdus. | column | IEEE8021-TC-MIBIEEE8021VlanIndex | .1.3.111.2.802.1.1.8.1.7.1.1.48 |
| dot1agCfmMepPbbTeMismatchAlarm A Boolean valued parameter that is set to true if the system
is to allow a mismatch defect to generate a fault alarm. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.49 |
| dot1agCfmMepActive Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
fa… | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.5 |
| dot1agCfmMepPbbTeLocalMismatchDefect A Boolean valued parameter that is set to true if the system
has detected a local mismatch defect. Mismatch detection
is an optional PBB-TE feature. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.50 |
| dot1agCfmMepPbbTeMismatchSinceReset A Boolean valued parameter indicating if the mismatch defect
has been present since the MEP Mismatch Fault Notification
Generator was last in the MFNG_RESET state. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.51 |
| dot1agCfmMepFngState Current state of the MEP Fault Notification Generator
State Machine. | column | Dot1agCfmFngState | .1.3.111.2.802.1.1.8.1.7.1.1.6 |
| dot1agCfmMepCciEnabled If set to true, the MEP will generate CCM messages. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.8.1.7.1.1.7 |
| dot1agCfmMepCcmLtmPriority The priority value for CCMs and LTMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass
through the Bridge Port for any of this MEPs VIDs.
The man… | column | Unsigned32 | .1.3.111.2.802.1.1.8.1.7.1.1.8 |
| dot1agCfmMepMacAddress MAC address of the MEP. | column | SNMPv2-TCMacAddress | .1.3.111.2.802.1.1.8.1.7.1.1.9 |