ieee8021BridgeBasePortTypeCapabilities

IEEE8021-BRIDGE-MIB · .1.3.111.2.802.1.1.2.1.1.4.1.7

Object

column Bits

Indicates the capabilities of this port.  The corresponding
instance of ieee8021BridgeBasePortType can potentially take
any of the values for which the corresponding bit in this
object is 1.  The possible port types are as follows:
              
    customerVlanPort(0) - Indicates the port can be a C-TAG-
        aware port of an enterprise VLAN-aware Bridge.
              
    providerNetworkPort(1) - Indicates the port can be an
        S-TAG-aware port of a Provider Bridge or Backbone
        Edge Bridge used for connections within a PBN or
        PBBN.
              
    customerNetworkPort(2) - Indicates the port can be an
        S-TAG-aware port of a Provider Bridge or Backbone
        Edge Bridge used for connections to the exterior of
        a PBN or PBBN.
              
    customerEdgePort(3) - Indicates the port can be a C-TAG-
        aware port of a Provider Bridge used for connections
        to the exterior of a PBN or PBBN.
              
    customerBackbonePort(4) - Indicates the port can be a
        I-TAG-aware port of a Backbone Edge Bridge's
        B-component.
              
    virtualInstancePort(5) - Indicates the port can be a
        virtual S-TAG-aware port within a Backbone Edge
        Bridge's I-component which is responsible for
        handling S-tagged traffic for a specific backbone
        service instance.
              
    dBridgePort(6) - Indicates the port can be a VLAN-unaware
        member of an IEEE 802.1Q Bridge.
              
    remoteCustomerAccessPort(7) - Indicates the port can be an
        S-TAG-aware port of a Provider Bridge capable of providing
        Remote Customer Service Interfaces.
                      
    stationFacingBridgePort(8) - Indicates the station-facing
        Bridge Port in a EVB Bridge.
                               
    uplinkAccessPort(9)  -  Indicates the uplink access port
        in an EVB Bridge or EVB station.
                  
    uplinkRelayPort (10)  - Indicates the uplink relay port
        in an EVB station.

Context

MIB: IEEE8021-BRIDGE-MIB
OID: .1.3.111.2.802.1.1.2.1.1.4.1.7
Type: column
Access: readonly
Status: current
Parent: ieee8021BridgeBasePortEntry
Table: ieee8021BridgeBasePortTable
Siblings: 11

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	customerVlanPort
`1`	providerNetworkPort
`2`	customerNetworkPort
`3`	customerEdgePort
`4`	customerBackbonePort
`5`	virtualInstancePort
`6`	dBridgePort
`7`	remoteCustomerAccessPort
`8`	stationFacingBridgePort
`9`	uplinkAccessPort
`10`	uplinkRelayPort

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ieee8021BridgeBasePortComponentId The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single component the defaul…	column	IEEE8021-TC-MIBIEEE8021PbbComponentIdentifier	`.1.3.111.2.802.1.1.2.1.1.4.1.1`
ieee8021BridgeBasePortAdminPointToPoint For a port running spanning tree, this object represents the administrative point-to-point status of the LAN segment attached to this port, using the enumeration values of IEEE S…	column	Enumeration	`.1.3.111.2.802.1.1.2.1.1.4.1.10`
ieee8021BridgeBasePortOperPointToPoint For a port running spanning tree, this object represents the operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered…	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.1.1.2.1.1.4.1.11`
ieee8021BridgeBasePortName A text string of up to 32 characters, of locally determined significance.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.111.2.802.1.1.2.1.1.4.1.12`
ieee8021BridgeBasePort The port number of the port for which this entry contains Bridge management information.	column	IEEE8021-TC-MIBIEEE8021BridgePortNumber	`.1.3.111.2.802.1.1.2.1.1.4.1.2`
ieee8021BridgeBasePortIfIndex The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlyin…	column	IF-MIBInterfaceIndexOrZero	`.1.3.111.2.802.1.1.2.1.1.4.1.3`
ieee8021BridgeBasePortDelayExceededDiscards The number of frames discarded by this port due to excessive transit delay through the Bridge. It is incremented by both transparent and source route Bridges. Disc…	column	frames SNMPv2-SMICounter64	`.1.3.111.2.802.1.1.2.1.1.4.1.4`
ieee8021BridgeBasePortMtuExceededDiscards The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route Bridges. Discontinuities in the value …	column	frames SNMPv2-SMICounter64	`.1.3.111.2.802.1.1.2.1.1.4.1.5`
ieee8021BridgeBasePortCapabilities Indicates the parts of IEEE 802.1Q that are optional on a per-port basis, that are implemented by this device, and that are manageable through this MIB. dot1qDot1qT…	column	Bits	`.1.3.111.2.802.1.1.2.1.1.4.1.6`
ieee8021BridgeBasePortType The port type. This value MUST be persistent over power up restart/reboot.	column	IEEE8021-TC-MIBIEEE8021BridgePortType	`.1.3.111.2.802.1.1.2.1.1.4.1.8`
ieee8021BridgeBasePortExternal A boolean indicating whether the port is external. A value of true(1) means the port is external. A value of false(2) means the port is internal.	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.1.1.2.1.1.4.1.9`