vrrpNewCfgVirtRtrInterval
IBM-GbTOR-G8264T-MIB ·
.1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.5
Object
column
r/w
Integer32
The time interval between VRRP advertisements in seconds. When FAST_ADVERTISEMENT is enabled, this object indicates advertisement interval in centi-seconds
Context
- MIB
- IBM-GbTOR-G8264T-MIB
- OID
.1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vrrpNewCfgVirtRtrTableEntry
- Table
- vrrpNewCfgVirtRtrTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpNewCfgVirtRtrIndx The VRRP virtual router table index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.1 |
| vrrpNewCfgVirtRtrTckVirtRtr Enable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.10 |
| vrrpNewCfgVirtRtrTckIpIntf Enable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.11 |
| vrrpNewCfgVirtRtrTckVlanPort Enable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.12 |
| vrrpNewCfgVirtRtrState Enable or disable the VRRP virtual router. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.17 |
| vrrpNewCfgVirtRtrFastAdvertisement This object can be enabled if sub-second advertisement interval is required.
When FAST_ADVERTISEMENT is enabled,
- New message type FAST_ADVERTISEMENT(2) will be used in the
VR… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.18 |
| vrrpNewCfgVirtRtrPreDelay The pre-emptive delay interval in seconds. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.19 |
| vrrpNewCfgVirtRtrID The VRRP virtual router identifier. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.2 |
| vrrpNewCfgVirtRtrAddr The VRRP virtual router IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.3 |
| vrrpNewCfgVirtRtrIfIndex The IfIndex that the VRRP virtual router is representing. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.4 |
| vrrpNewCfgVirtRtrPriority The priority value to be used by the specified VRRP virtual router. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.6 |
| vrrpNewCfgVirtRtrPreempt This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit p… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.7 |
| vrrpNewCfgVirtRtrDelete When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.3.1.6.4.1.8 |