portInfoLink
IBM-GbTOR-G8264T-MIB ·
.1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.5
Object
column
Enumeration
The current operational link status of the port.
Context
- MIB
- IBM-GbTOR-G8264T-MIB
- OID
.1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portInfoTableEntry
- Table
- portInfoTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | disabled |
4 | inoperative |
5 | errdisabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portInfoIndx The port index. | column | PortNumber | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.1 |
| portInfoPhyIfOperStatus The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.10 |
| portInfoPhyIfLastChange The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.11 |
| portInfoLearning The port L2 (FDB) Learning state. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.18 |
| portInfoSpeed The current operational speed of the port. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.2 |
| portInfoBpduGuard The operational status of BPDU Guard on the port. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.20 |
| portInfoPvid This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.21 |
| portInfoVlanTag This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
e… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.22 |
| portInfoErrDisableRecovery This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is … | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.23 |
| portInfoErrDisableTimeLeft If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, i… | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.24 |
| portInfoExtGuard The operational status of STP Loop/Root Guard on the port. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.25 |
| portInfoLFDState This object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.26 |
| portInfoMode The current operational mode of the port. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.3 |
| portInfoFlowCtrl The current operational flow control of the port. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.4 |
| portInfoPhyIfDescr A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface. | column | OctetString | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.6 |
| portInfoPhyIfType The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.7 |
| portInfoPhyIfMtu The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the si… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.8 |
| portInfoPhyIfPhysAddress The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), … | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.20301.2.7.13.1.3.2.1.1.9 |