lacpInfoPortSelected

IBM-GbTOR-G8264T-MIB · .1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.15
MIB view Table view

Object

column Enumeration 
Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no 
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently prevent the port from being 
enabled as part of the aggregation, and so the port is being held
in standby condition. 
A value of suspended indicates that the port in a LACP port-channel 
cannot be aggregated due to, for example, not receiveing LACPDU. 
A value of individual indicates that the port works as a normal link-up 
port due to not receiving LACPDU.

Context

MIB
IBM-GbTOR-G8264T-MIB
OID
.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.15
Type
column
Access
readonly
Status
current
Parent
lacpInfoPortGeneralTableEntry
Table
lacpInfoPortGeneralTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1selected
2unselected
3standby
4suspended
5individual

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lacpInfoPortGeneralIndex
The port identifier.
columnPortNumber.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.1
lacpInfoPortIndivState
LACP port individual state
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.10
lacpInfoSelAggrId
LACP port selected aggregator ID
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.11
lacpInfoAttAggrId
LACP port attached aggregator ID
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.12
lacpInfoPortReadyN
True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.13
lacpInfoPortNtt
Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.14
lacpInfoPortMoved
Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by …
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.16
lacpInfoCollDetState
LACP port collision and detection state
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.17
lacpInfoPortRxState
LACP port RX machine state
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.18
lacpInfoPortMuxState
LACP port Mux machine state
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.19
lacpInfoPortLacpEna
LACP enabled on port
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.2
lacpInfoPortPerState
LACP port periodic machine state
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.20
lacpInfoPortPerTraTimer
Periodic Transmit Timer
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.21
lacpInfoPortCurWhileTimer
Current While Timer
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.22
lacpInfoPortOperState
The current operational state of LACP on the port.
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.23
lacpInfoPortAdminEna
LACP port admin enabled
columnEnumeration.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.3
lacpInfoPortActSysId
LACP port actor system ID
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.4
lacpInfoPortActSysPrio
LACP port actor system priority
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.5
lacpInfoPortActAdminKey
LACP port actor admin key
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.6
lacpInfoPortActOperKey
LACP port actor oper key
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.7
lacpInfoPortActPortNum
LACP port number
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.8
lacpInfoPortActPortPrio
LACP port priority
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.20301.2.7.13.2.3.3.2.1.1.9