acl6NewCfgRemoveEgressPort
IBM-GbTOR-G8264T-MIB ·
.1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.21
Object
column
r/w
PortNumber
The port to be removed from the specified ACL6. A value of zero is always returned when this object is read.
Context
- MIB
- IBM-GbTOR-G8264T-MIB
- OID
.1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acl6NewCfgEntry
- Table
- acl6NewCfgTable
- Siblings
- 38
Syntax
PortNumber
- Source
- PortNumber
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acl6NewCfgIndex The index associated with this ACL6 entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.1 |
| acl6NewCfgIPv6TrafficClass The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.10 |
| acl6NewCfgIPv6NextHeader The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.11 |
| acl6NewCfgSrcPort The source TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.12 |
| acl6NewCfgSrcPortMask The mask applied to acl6CurCfgSrcPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.13 |
| acl6NewCfgDstPort The destination TCP/UDP port number to be filtered. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.14 |
| acl6NewCfgDstPortMask The mask applied to acl6CurCfgDstPort for filtering. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.15 |
| acl6NewCfgTCPFlags The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.16 |
| acl6NewCfgTCPFlagsMask The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
… | column | Bits | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.17 |
| acl6NewCfgEgressPorts The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx ...… | column | OctetString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.18 |
| acl6NewCfgStatistics Whether statistics collection for this ACL6 is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.19 |
| acl6NewCfgGroup The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.2 |
| acl6NewCfgAddEgressPort The port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read. | column | PortNumber | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.20 |
| acl6NewCfgDelete This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.22 |
| acl6NewCfgUser Set user defined priority for this ACL6. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.23 |
| acl6NewCfgInprofDscp Set in profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.24 |
| acl6NewCfgTos To enable/disable setting pkts based on TOS bits. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.25 |
| acl6NewCfgUserEnable Set update method for this ACL6. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.27 |
| acl6NewCfgInprofDscpEnable Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value en… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.28 |
| acl6NewCfgFilterAction The action to be performed on a packet that matches the filter
settings of this ACL6 entry. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.3 |
| acl6NewCfgIPv6Reset This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.30 |
| acl6NewCfgTcpudpReset This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.31 |
| acl6NewCfgRemarkInprofReset This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.32 |
| acl6NewCfgLog Whether log for this ACL is enabled or not. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.33 |
| acl6NewCfgMeterAction Meter Action for this ACL. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.35 |
| acl6NewCfgMeterEnable Meter state for this ACL. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.36 |
| acl6NewCfgKbitsSec The commited rate of meter associated with this ACL entry. | column | Unsigned32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.37 |
| acl6NewCfgKbitsBurst The maximum burst size of the meter associated with this ACL entry. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.38 |
| acl6NewCfgMeterReset This is an action object to reset an ACL6 Meter entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.39 |
| acl6NewCfgFilterActionSetPrio The COS queue to be used when the action for this ACL6 entry is
set to setprio. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.4 |
| acl6NewCfgOutprofDscp Set out profile pkts DSCP value. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.40 |
| acl6NewCfgOutprofDscpEnable Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value en… | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.41 |
| acl6NewCfgRemarkOutprofReset This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read. | column | Enumeration | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.42 |
| acl6NewCfgSrcIPv6Address The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:x… | column | OctetString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.5 |
| acl6NewCfgSrcIPv6PrefixLen The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.6 |
| acl6NewCfgDstIPv6Address The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xx… | column | OctetString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.7 |
| acl6NewCfgDstIPv6PrefixLen The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering. | column | Integer32 | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.8 |
| acl6NewCfgIPv6FlowLabel The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.20301.2.7.13.9.1.5.2.1.9 |