dot3MauType100BaseTXHD
IANA-MAU-MIB ·
.1.3.6.1.2.1.26.4.15
Object
node
2 pair category 5 UTP, half duplex mode
Context
- MIB
- IANA-MAU-MIB
- OID
.1.3.6.1.2.1.26.4.15- Type
- node
- Status
- current
- Parent
- dot3MauType
- Siblings
- 103
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3MauTypeAUI no internal MAU, view from AUI | node | - | .1.3.6.1.2.1.26.4.1 |
| dot3MauType10BaseTHD UTP MAU, half duplex mode | node | - | .1.3.6.1.2.1.26.4.10 |
| dot3MauType100GbaseKP4 100GBASE-P PCS/PMA over an electrical backplane PMD | node | - | .1.3.6.1.2.1.26.4.100 |
| dot3MauType100GbaseR 100GBASE-R Multi-lane PCS over undefined PMA/PMD | node | - | .1.3.6.1.2.1.26.4.101 |
| dot3MauType100GbaseSR4 100GBASE-R PCS/PMA over 4 lane multimode fiber | node | - | .1.3.6.1.2.1.26.4.102 |
| dot3MauType2p5GigT 2.5GBASE-T Four-pair twisted-pair balanced copper cabling PHY | node | - | .1.3.6.1.2.1.26.4.103 |
| dot3MauType5GigT 5GBASE-T Four-pair twisted-pair balanced copper cabling PHY | node | - | .1.3.6.1.2.1.26.4.104 |
| dot3MauType10BaseTFD UTP MAU, full duplex mode | node | - | .1.3.6.1.2.1.26.4.11 |
| dot3MauType10BaseFLHD async fiber MAU, half duplex mode | node | - | .1.3.6.1.2.1.26.4.12 |
| dot3MauType10BaseFLFD async fiber MAU, full duplex mode | node | - | .1.3.6.1.2.1.26.4.13 |
| dot3MauType100BaseT4 4 pair category 3 UTP | node | - | .1.3.6.1.2.1.26.4.14 |
| dot3MauType100BaseTXFD 2 pair category 5 UTP, full duplex mode | node | - | .1.3.6.1.2.1.26.4.16 |
| dot3MauType100BaseFXHD X fiber over PMT, half duplex mode | node | - | .1.3.6.1.2.1.26.4.17 |
| dot3MauType100BaseFXFD X fiber over PMT, full duplex mode | node | - | .1.3.6.1.2.1.26.4.18 |
| dot3MauType100BaseT2HD 2 pair category 3 UTP, half duplex mode | node | - | .1.3.6.1.2.1.26.4.19 |
| dot3MauType10Base5 thick coax MAU | node | - | .1.3.6.1.2.1.26.4.2 |
| dot3MauType100BaseT2FD 2 pair category 3 UTP, full duplex mode | node | - | .1.3.6.1.2.1.26.4.20 |
| dot3MauType1000BaseXHD PCS/PMA, unknown PMD, half duplex mode | node | - | .1.3.6.1.2.1.26.4.21 |
| dot3MauType1000BaseXFD PCS/PMA, unknown PMD, full duplex mode | node | - | .1.3.6.1.2.1.26.4.22 |
| dot3MauType1000BaseLXHD Fiber over long-wavelength laser, half duplex
mode | node | - | .1.3.6.1.2.1.26.4.23 |
| dot3MauType1000BaseLXFD Fiber over long-wavelength laser, full duplex
mode | node | - | .1.3.6.1.2.1.26.4.24 |
| dot3MauType1000BaseSXHD Fiber over short-wavelength laser, half
duplex mode | node | - | .1.3.6.1.2.1.26.4.25 |
| dot3MauType1000BaseSXFD Fiber over short-wavelength laser, full
duplex mode | node | - | .1.3.6.1.2.1.26.4.26 |
| dot3MauType1000BaseCXHD Copper over 150-Ohm balanced cable, half
duplex mode | node | - | .1.3.6.1.2.1.26.4.27 |
| dot3MauType1000BaseCXFD Copper over 150-Ohm balanced cable, full
duplex mode | node | - | .1.3.6.1.2.1.26.4.28 |
| dot3MauType1000BaseTHD Four-pair Category 5 UTP, half duplex mode | node | - | .1.3.6.1.2.1.26.4.29 |
| dot3MauTypeFoirl FOIRL MAU | node | - | .1.3.6.1.2.1.26.4.3 |
| dot3MauType1000BaseTFD Four-pair Category 5 UTP, full duplex mode | node | - | .1.3.6.1.2.1.26.4.30 |
| dot3MauType10GigBaseX X PCS/PMA, unknown PMD. | node | - | .1.3.6.1.2.1.26.4.31 |
| dot3MauType10GigBaseLX4 X fiber over WWDM optics | node | - | .1.3.6.1.2.1.26.4.32 |
| dot3MauType10GigBaseR R PCS/PMA, unknown PMD. | node | - | .1.3.6.1.2.1.26.4.33 |
| dot3MauType10GigBaseER R fiber over 1550 nm optics | node | - | .1.3.6.1.2.1.26.4.34 |
| dot3MauType10GigBaseLR R fiber over 1310 nm optics | node | - | .1.3.6.1.2.1.26.4.35 |
| dot3MauType10GigBaseSR R fiber over 850 nm optics | node | - | .1.3.6.1.2.1.26.4.36 |
| dot3MauType10GigBaseW W PCS/PMA, unknown PMD. | node | - | .1.3.6.1.2.1.26.4.37 |
| dot3MauType10GigBaseEW W fiber over 1550 nm optics | node | - | .1.3.6.1.2.1.26.4.38 |
| dot3MauType10GigBaseLW W fiber over 1310 nm optics | node | - | .1.3.6.1.2.1.26.4.39 |
| dot3MauType10Base2 thin coax MAU | node | - | .1.3.6.1.2.1.26.4.4 |
| dot3MauType10GigBaseSW W fiber over 850 nm optics | node | - | .1.3.6.1.2.1.26.4.40 |
| dot3MauType10GigBaseCX4 X copper over 8 pair 100-Ohm balanced cable | node | - | .1.3.6.1.2.1.26.4.41 |
| dot3MauType2BaseTL Voice grade UTP copper, up to 2700m, optional PAF | node | - | .1.3.6.1.2.1.26.4.42 |
| dot3MauType10PassTS Voice grade UTP copper, up to 750m, optional PAF | node | - | .1.3.6.1.2.1.26.4.43 |
| dot3MauType100BaseBX10D One single-mode fiber OLT, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.44 |
| dot3MauType100BaseBX10U One single-mode fiber ONU, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.45 |
| dot3MauType100BaseLX10 Two single-mode fibers, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.46 |
| dot3MauType1000BaseBX10D One single-mode fiber OLT, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.47 |
| dot3MauType1000BaseBX10U One single-mode fiber ONU, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.48 |
| dot3MauType1000BaseLX10 Two sigle-mode fiber, long wavelength, 10km | node | - | .1.3.6.1.2.1.26.4.49 |
| dot3MauType10BaseT UTP MAU.
Note that it is strongly recommended that
agents return either dot3MauType10BaseTHD or
dot3MauType10BaseTFD if the duplex mode is
known. However, management applications… | node | - | .1.3.6.1.2.1.26.4.5 |
| dot3MauType1000BasePX10D One single-mode fiber EPON OLT, 10km | node | - | .1.3.6.1.2.1.26.4.50 |
| dot3MauType1000BasePX10U One single-mode fiber EPON ONU, 10km | node | - | .1.3.6.1.2.1.26.4.51 |
| dot3MauType1000BasePX20D One single-mode fiber EPON OLT, 20km | node | - | .1.3.6.1.2.1.26.4.52 |
| dot3MauType1000BasePX20U One single-mode fiber EPON ONU, 20km | node | - | .1.3.6.1.2.1.26.4.53 |
| dot3MauType10GbaseT Four-pair Category 6A or better, full duplex mode only | node | - | .1.3.6.1.2.1.26.4.54 |
| dot3MauType10GbaseLRM R multimode fiber over 1310 nm optics | node | - | .1.3.6.1.2.1.26.4.55 |
| dot3MauType1000baseKX X backplane, full duplex mode only | node | - | .1.3.6.1.2.1.26.4.56 |
| dot3MauType10GbaseKX4 4 lane X backplane, full duplex mode only | node | - | .1.3.6.1.2.1.26.4.57 |
| dot3MauType10GbaseKR R backplane, full duplex mode only | node | - | .1.3.6.1.2.1.26.4.58 |
| dot3MauType10G1GbasePRXD1 One single-mode fiber asymmetric-rate EPON OLT, supporting low
power budget (PRX10) | node | - | .1.3.6.1.2.1.26.4.59 |
| dot3MauType10BaseFP passive fiber MAU | node | - | .1.3.6.1.2.1.26.4.6 |
| dot3MauType10G1GbasePRXD2 One single-mode fiber asymmetric-rate EPON OLT, supporting
medium power budget (PRX20) | node | - | .1.3.6.1.2.1.26.4.60 |
| dot3MauType10G1GbasePRXD3 One single-mode fiber asymmetric-rate EPON OLT, supporting high
power budget (PRX30) | node | - | .1.3.6.1.2.1.26.4.61 |
| dot3MauType10G1GbasePRXU1 One single-mode fiber asymmetric-rate EPON ONU, supporting low
power budget (PRX10) | node | - | .1.3.6.1.2.1.26.4.62 |
| dot3MauType10G1GbasePRXU2 One single-mode fiber asymmetric-rate EPON ONU, supporting
medium power budget (PRX20) | node | - | .1.3.6.1.2.1.26.4.63 |
| dot3MauType10G1GbasePRXU3 One single-mode fiber asymmetric-rate EPON ONU, supporting high
power budget (PRX30) | node | - | .1.3.6.1.2.1.26.4.64 |
| dot3MauType10GbasePRD1 One single-mode fiber symmetric-rate EPON OLT, supporting low
power budget (PR10) | node | - | .1.3.6.1.2.1.26.4.65 |
| dot3MauType10GbasePRD2 One single-mode fiber symmetric-rate EPON OLT, supporting
medium power budget (PR20) | node | - | .1.3.6.1.2.1.26.4.66 |
| dot3MauType10GbasePRD3 One single-mode fiber symmetric-rate EPON OLT, supporting high
power budget (PR30) | node | - | .1.3.6.1.2.1.26.4.67 |
| dot3MauType10GbasePRU1 One single-mode fiber symmetric-rate EPON ONU, supporting
low and medium power budget (PR10 and PR20) | node | - | .1.3.6.1.2.1.26.4.68 |
| dot3MauType10GbasePRU3 One single-mode fiber symmetric-rate EPON ONU, supporting high
power budget (PR30) | node | - | .1.3.6.1.2.1.26.4.69 |
| dot3MauType10BaseFB sync fiber MAU | node | - | .1.3.6.1.2.1.26.4.7 |
| dot3MauType40GbaseKR4 40GBASE-R PCS/PMA over an electrical
backplane | node | - | .1.3.6.1.2.1.26.4.70 |
| dot3MauType40GbaseCR4 40GBASE-R PCS/PMA over 4 lane shielded
copper balanced cable | node | - | .1.3.6.1.2.1.26.4.71 |
| dot3MauType40GbaseSR4 40GBASE-R PCS/PMA over 4 lane multimode
fiber | node | - | .1.3.6.1.2.1.26.4.72 |
| dot3MauType40GbaseFR 40GBASE-R PCS/PMA over single mode
fiber | node | - | .1.3.6.1.2.1.26.4.73 |
| dot3MauType40GbaseLR4 40GBASE-R PCS/PMA over 4 WDM lane
single mode fiber | node | - | .1.3.6.1.2.1.26.4.74 |
| dot3MauType100GbaseCR10 100GBASE-R PCS/PMA over 10 lane
shielded copper balanced cable | node | - | .1.3.6.1.2.1.26.4.75 |
| dot3MauType100GbaseSR10 100GBASE-R PCS/PMA over 10 lane
multimode fiber | node | - | .1.3.6.1.2.1.26.4.76 |
| dot3MauType100GbaseLR4 100GBASE-R PCS/PMA over 4 WDM lane
single mode fiber, long reach | node | - | .1.3.6.1.2.1.26.4.77 |
| dot3MauType100GbaseER4 100GBASE-R PCS/PMA over 4 WDM lane
single mode fiber PMD, extended reach | node | - | .1.3.6.1.2.1.26.4.78 |
| dot3MauType1000baseT1 1000BASE-T1 single balanced twisted-pair copper cabling PHY | node | - | .1.3.6.1.2.1.26.4.79 |
| dot3MauType10BaseFL async fiber MAU.
Note that it is strongly recommended that
agents return either dot3MauType10BaseFLHD or
dot3MauType10BaseFLFD if the duplex mode is
known. However, management ap… | node | - | .1.3.6.1.2.1.26.4.8 |
| dot3MauType1000basePX30D One single-mode fiber EPON OLT, 20km, 1:32 split ratio | node | - | .1.3.6.1.2.1.26.4.80 |
| dot3MauType1000basePX30U One single-mode fiber EPON ONU, 20km, 1:32 split ratio | node | - | .1.3.6.1.2.1.26.4.81 |
| dot3MauType1000basePX40D One single-mode fiber EPON OLT, 20km, 1:64 split ratio | node | - | .1.3.6.1.2.1.26.4.82 |
| dot3MauType1000basePX40U One single-mode fiber EPON ONU, 20km, 1:64 split ratio | node | - | .1.3.6.1.2.1.26.4.83 |
| dot3MauType10G1GbasePRXD4 One single-mode fiber asymmetric-rate EPON OLT, supporting
extended power budget (PRX40) | node | - | .1.3.6.1.2.1.26.4.84 |
| dot3MauType10G1GbasePRXU4 One single-mode fiber asymmetric-rate EPON ONU, supporting
extended power budget (PRX40) | node | - | .1.3.6.1.2.1.26.4.85 |
| dot3MauType10GbasePRD4 One single-mode fiber symmetric-rate EPON OLT, supporting
extended power budget (PR40) | node | - | .1.3.6.1.2.1.26.4.86 |
| dot3MauType10GbasePRU4 One single-mode fiber symmetric-rate EPON ONU, supporting
extended power budget (PR40) | node | - | .1.3.6.1.2.1.26.4.87 |
| dot3MauType25GbaseCR 25GBASE-R PCS/PMA over shielded balanced copper cable | node | - | .1.3.6.1.2.1.26.4.88 |
| dot3MauType25GbaseCRS 25GBASE-R PCS/PMA over shielded balanced copper cable
without RS-FEC | node | - | .1.3.6.1.2.1.26.4.89 |
| dot3MauType10Broad36 broadband DTE MAU.
Note that 10BROAD36 MAUs can be attached to
interfaces but not to repeaters. | node | - | .1.3.6.1.2.1.26.4.9 |
| dot3MauType25GbaseKR 25GBASE-R PCS/PMA over an electrical backplane | node | - | .1.3.6.1.2.1.26.4.90 |
| dot3MauType25GbaseKRS 25GBASE-R PCS/PMA over an electrical backplane without RS-FEC | node | - | .1.3.6.1.2.1.26.4.91 |
| dot3MauType25GbaseR 25GBASE-R PCS/PMA over undefined PMD | node | - | .1.3.6.1.2.1.26.4.92 |
| dot3MauType25GbaseSR 25GBASE-R PCS/PMA over multimode fiber | node | - | .1.3.6.1.2.1.26.4.93 |
| dot3MauType25GbaseT Four-pair twisted-pair balanced copper cabling | node | - | .1.3.6.1.2.1.26.4.94 |
| dot3MauType40GbaseER4 40GBASE-R PCS/PMA over 4 WDM lane single mode fiber | node | - | .1.3.6.1.2.1.26.4.95 |
| dot3MauType40GbaseR 40GBASE-R PCS as over undefined PMA/PMD | node | - | .1.3.6.1.2.1.26.4.96 |
| dot3MauType40GbaseT Four-pair twisted-pair balanced copper cabling | node | - | .1.3.6.1.2.1.26.4.97 |
| dot3MauType100GbaseCR4 100GBASE-R PCS/PMA over 4 lane shielded copper balanced cable | node | - | .1.3.6.1.2.1.26.4.98 |
| dot3MauType100GbaseKR4 100GBASE-R PCS/PMA over an electrical backplane | node | - | .1.3.6.1.2.1.26.4.99 |