hwGponDeviceOntControlRunStatus
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15
Object
column
Enumeration
This object indicates the ONT running status. Options: 1. up(1) - Normal 2. down(2) - Fault 3. invalid(-1) - Indicates that the query fails or no information is detected
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.2.46.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwGponDeviceOntControlInfoEntry
- Table
- hwGponDeviceOntControlInfoTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOntControlActive This object is used to activate or deactivate an ONT.
Options:
1. activate(1) - Activates an ONT
2. deactivate(2) - Deactivate an ONT
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.1 |
| hwGponDeviceOntControlConfigStatus This is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted. If the config status is noresume (4),
set the resume policy as res… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.16 |
| hwGponDeviceOntControlDiscoveryStatus This object indicates the ONT discovery state.
Options:
1. on(1) - Indicates that the ONT discovery state is on
2. off(2) - Indicates that the ONT disco… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.17 |
| hwGponDeviceOntControlMatchStatus This object indicates the ONT match status.
Options:
1. initialization(1) - Indicates that the ONT is initialization
2. match(2) - Indicates that the ONT is… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.18 |
| hwGponDeviceOntControlDbaStatus This object indicates the DBA report status.
Options:
1. nsr(1) - NSR
2. sr(2) - SR
3. invalid(-1) - Indicates that the query fails or no information is detected | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.19 |
| hwGponDeviceOntControlReset This object is used to reset an ONT.
Options:
1. reset(1) - Reset an ONT
2. invalid(-1) - Indicates that the query fails or no information is detected | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.2 |
| hwGponDeviceOntControlRanging This object indicates the result of the ONT ranging.
Unit: m
Options:
1. invalid (-1) - Indicates that the query fails or no information is detected. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.20 |
| hwGponDeviceOntControlMacCount This object indicates the number of MAC addresses that are learned by the ONT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.21 |
| hwGponDeviceOntControlLastUpTime This object indicates the time when the ONT last went online. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.22 |
| hwGponDeviceOntControlLastDownTime This object indicates the time when the ONT last went offline. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.23 |
| hwGponDeviceOntControlLastDownCause This object indicates the reason why the ONT last went offline.
The value (1) indicates that the reason is LOS(Loss of signal),
The value (2) indicates that the reason is LOSi(Los… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.24 |
| hwGponDeviceOntControlLastDyingGaspTime This object indicates the time when the ONT last went down due to Dying Gasp. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.25 |
| hwGponDeviceOntControlIsolationState This object indicates the ONT isolation status.
Options:
1. normal(0) - Indicates that the ONT is normal
2. isolated(1) - Indicates that the ONT is isolated | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.26 |
| hwGponDeviceOntControlBatteryCurStatus This object indicates the ONT battery status.
Options:
1. notSupport(0) - Not support
2. charge(1) - Charge state
3. discharge(2) - Discharge state
4.… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.27 |
| hwGponDeviceOntControlTcontNumCombined The number of the combined T-CONTs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.28 |
| hwGponDeviceOntControlLastRanging This object indicates the result of the ONT last ranging.
Unit: m
Options:
1. invalid (-1) - Indicates that the query fails or no information is detected. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.29 |
| hwGponDeviceOntControlReRegister This object is used to re-register an ONT.
Options:
1. reRegister(1) - Re-register an ONT
2. invalid(-1) - Indicates that the query fails or no information is detected | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.3 |
| hwGponDeviceOntControlActualSn The ONT's actual serial number. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.30 |
| hwGponDeviceOntControlReDiscovery This object is used to reset the discovery status of an ONT.
If the authentication mode is once-on(4), after performing the rediscovery operation,
the registered working period is… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.46.1.4 |