hwGponDeviceOltControlDnFecEnabled
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.2.21.1.3
Object
column
r/w
Enumeration
This object indicates the downstream FEC switch. Options: 1. enable(1) - Enable the downstream FEC switch 2. disable(2) - Disable the downstream FEC switch 3. invalid(-1) - Indicates that the query fails or no information is detected For GPON, the default value is disable(2). For XG-PON, the default value is enable(1).
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.2.21.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwGponDeviceOltControlInfoEntry
- Table
- hwGponDeviceOltControlInfoTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwGponDeviceOltControlNearest This is the fiber distance between the OLT and the nearest ONT.
For GPON, the fiber distance between the OLT and the nearest ONT
is 0 km to 40 km while the maximum fiber distance… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.1 |
| hwGponDeviceOltControlStatus This object indicates the GPON port status in the OLT.
Options:
1. up(1) - Indicates that the GPON port is normal
2. down(2) - Indicates that the GPON port is fault | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.10 |
| hwGponDeviceOltControlManualDetectRogueOnt This object indicates the switch of the rogue ONT manual detection.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual detection
2. invalid(-1) - Indicates … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.11 |
| hwGponDeviceOltControlIlegalIncurRogueOntExt This object is used to query whether there are Illegal incursionary rogue ONTs under port.
Options:
1. inexistent(0) - Indicates that there are not Illegal incursionary rogue O… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.12 |
| hwGponDeviceOltControlOpticModuleStatus This object indicates the optical module status on GPON port.
Options:
1. online(1) - Indicates that the optical module is online
2. offline(2) - Indicates that t… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.13 |
| hwGponDeviceOltControlAvailableBandWidth This object indicates the available bandwidth of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.14 |
| hwGponDeviceOltObjectOpticAlarmProfileName This object indicates the name of the optical alarm profile that is bound to the port. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.15 |
| hwGponDeviceOltControlOntNum This object indicates the number of ONTs that are added to the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.16 |
| hwGponDeviceOltLastUpTime This object indicates the time when the port last went online. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.17 |
| hwGponDeviceOltLastDownTime This object indicates the time when the port last went offline. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.18 |
| hwGponDeviceOltLastDownCause This object indicates the reason why the port last went offline.
Options:
1. los(1) - Loss of signal
2. opticModuleAbsence(2) - The optic module is absence
3. optic… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.19 |
| hwGponDeviceOltControlFarthest This is the fiber distance between the OLT and the farthest ONT.
For GPON, the fiber distance between the OLT and the nearest ONT
is 0 km to 60 km while the maximum fiber distanc… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.2 |
| hwGponDeviceOltControlTcontNumCombined The number of the combined T-CONTs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.20 |
| hwGponDeviceOltControlTcontNumInCard The number of T-CONTs in the card. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.21 |
| hwGponDeviceOltControlEnergySavingFlag Energy saving state of the GPON port.
Options:
1. yes (1) - The GPON port is in energy saving state
2. no (2) - The GPON port is not in energy saving state | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.22 |
| hwGponDeviceOltControlManualCheckRogueOnt This object indicates the switch of the rogue ONT manual check.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual checked
2. invalid(-1) - Indicates that t… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.23 |
| hwGponDeviceOltControlPortReset This parameter is used to reset the port.
Options:
1. reset(1) - Indicates that the port resets
2. invalid(-1) - Indicates that the query fails or no information is checked | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.24 |
| hwGponDeviceOltControlAutofindOntEnable This object indicates the ONT auto find switch.
Options:
1. enable(1) - Enable the ONT auto find switch
2. disable(2) - Disable the ONT auto find switch
3. invalid(… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.4 |
| hwGponDeviceOltControlChangePasswordAge This object indicates the ONT password update period.
0 means no update, range: 0 or 5~1440 minutes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.5 |
| hwGponDeviceOltControlDespt This object indicates the description of GPON port. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.6 |
| hwGponDeviceOltControlLeftBandWidth This object indicates the untapped bandwidth of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.7 |
| hwGponDeviceOltControlMinBandwidth This object indicates the minimum bandwidth of T-CONTs in the OLT port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.8 |
| hwGponDeviceOltControlLaserSwitch This object indicates the laser switch of the GPON port.
Options:
1. on(1) - Open the laser switch of the GPON port
2. off(2) - Close th… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.21.1.9 |