hwGponDeviceDbaAssignmentMode
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.1.26
Object
scalar
r/w
Enumeration
This object is used to select the DBA assignment mode. Options: 1.maxbandwidthusage(1) - Indicates that the usage of bandwidth is maximum 2.minloopdelay(2) - Indicates that the loop delay is minimum 3.manual(3) - Indicates that the DBA assignment mode is manual,this value can not set now
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.1.26- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwXponDeviceGlobalObjects
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | maxbandwidthusage |
2 | minloopdelay |
3 | manual |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponDeviceAutoFindOntAge The aging time of the auto-found ONT, which can be 0s (indicating that the ONT will not aging) or a value from 100s to 300s. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.1 |
| hwXponDeviceAutoFindInterval Indicates the SN request interval, ranging from 1(s) to 10(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.2 |
| hwGponDeviceMulticastGemportId The special GEM port ID is used for the multicast service, ranging from 4000 to 4095. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.21 |
| hwGponDeviceBaseGemportId The base GEM port is used when the board's car-mode is port-cos, ranging from 128 to 3872. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.22 |
| hwGponDeviceMinimumBandwidth The scalar is used to configure the minimum bandwidth of the T-CONTs in the system,
ranging from 384 to 1024. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.23 |
| hwXponDeviceAutoDetectRogueOntNew This object is used to open or close the switch of rogue ONT automatic detection.
Options:
1.on(1) - Open the switch of rogue ONT automatic detection
2.off(2) - Close the s… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.1.24 |
| hwGponDeviceDbaBandwidthType This object is used to select the type of bandwidth.
Options:
1.gpon(1) - Indicates that the type of bandwidth is GPON
2.ethernet(2) - Indicates that the type of… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.1.25 |
| hwXponDeviceModeCfgSwitch This object is used to change XPON management mode.
When xpon mode is changed from profile mode to distributing mode and there are xpon data or xpon board information in system,
t… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.1.3 |
| hwEponDeviceCtcOuiId This object is used to set the Organizationally Unique Identifier. | scalar | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.1.41 |
| hwEponDeviceChangePasswordIntervalTime The interval time of ONT's password renew, ranging from 1(s) to 254(s). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.1.42 |