hwEponOltXFPOpticsModuleInfoSupportLinesideMode
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.2.24.1.25
Object
column
Enumeration
This object indicates the XFI mode. Options: 1. nonSupportLinesideMode(0) - Don't Support Lineside Loopback Mode 2. supportLinesideMode(1) - Lineside Loopback Mode Supported 3. invalid(-1) - Indicates that the query fails or no information is detected
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.2.24.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwEponOltXFPOpticsModuleInfoEntry
- Table
- hwEponOltXFPOpticsModuleInfoTable
- Siblings
- 55
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
0 | nonSupportLinesideMode |
1 | supportLinesideMode |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEponOltXFPOpticsModuleInfoIdentifier This object indicates the type of serial transceiver.
Options:
1. unknown(0) - Unknown or unspecified
2. gbic(1) - GBIC
3. solderedToM… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.1 |
| hwEponOltXFPOpticsModuleInfoEncoding64B This object indicates the Encoding64B.
Options:
1. nonEncoding64B(0) - Encoding Don't Support 64B/66B
2. encoding64B(1) - Encoding Support 64B/66B
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.10 |
| hwEponOltXFPOpticsModuleInfoBrMin Minimum bit rate, units of 100 MBits/s. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.11 |
| hwEponOltXFPOpticsModuleInfoBrMax Maximum bit rate, units of 100 MBits/s. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.12 |
| hwEponOltXFPOpticsModuleInfoSupportLenSMF Link length supported for SMF fiber in km. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.13 |
| hwEponOltXFPOpticsModuleInfoSupportLenE50um Link length supported for EBW 50/125 um fiber, units of 2 m. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.14 |
| hwEponOltXFPOpticsModuleInfoSupportLen50um Link length supported for 50/125 um fiber, units of 1 m. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.15 |
| hwEponOltXFPOpticsModuleInfoSupportLen62p5um Link length supported for 62.5/125 um fiber, units of 1 m. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.16 |
| hwEponOltXFPOpticsModuleInfoSupportLenCopper Link length supported for copper, units of 1m. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.17 |
| hwEponOltXFPOpticsModuleInfoTransmitterSupport This object indicates the transmitter support.
Options:
1. nonTunable(0) - Transmitter Not Support Tunable
2. tunable(1) - Transmitter Support Tunable
3. invalid(-1)… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.18 |
| hwEponOltXFPOpticsModuleInfoDetector This object indicates the transmitter support.
Options:
1. pin(0) - PIN
2. apd(1) - APD
3. invalid(-1) - Indicates that the query fails or no infor… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.19 |
| hwEponOltXFPOpticsModuleInfoExtCLEICode This object indicates the extclei code.
Options:
1. nonExtCLEICode(0) - No CLEI code present in Table 02h
2. extCLEICode(1) - CLEI code present in… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.2 |
| hwEponOltXFPOpticsModuleInfoWavelengthControl This object indicates the wavelength control.
Options:
1. nonSupport(0) - Wavelength control NonSupport
2. support(1) - Wavelength control Support
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.20 |
| hwEponOltXFPOpticsModuleInfoCooledTransmitterDevice This object indicates the cooled transmitter device.
Options:
1. nonSupport(0) - Cooled transmitter device NonSupport
2. support(1) - Cooled transmitter device Supp… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.21 |
| hwEponOltXFPOpticsModuleInfoTransmitterTechnologySupport This object indicates the transmitter technology support.
Options:
1. vCSEL850(0) - vCSEL850
2. vCSEL1310(1) - vCSEL1310
3. vCSEL1550(2) - vCSEL1550
4. f… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.22 |
| hwEponOltXFPOpticsModuleInfoVendorName This object indicates the XFP vendor name (ASCII). | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.23 |
| hwEponOltXFPOpticsModuleInfoSupportXFIMode This object indicates the XFI mode.
Options:
1. nonSupportXFIMode(0) - Don't Support XFI Loopback Mode
2. supportXFIMode(1) - XFI Loopback Mode Supported
3. invalid(-… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.24 |
| hwEponOltXFPOpticsModuleInfoMaxBitRateSupportedByCDR This object indicates the max bit rate by CDR.
Options:
1. cDRNosupport(0) - CDR not support
2. maxBitRateSupportedByCDR11p1(1) - CDR support for 11.1 … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.26 |
| hwEponOltXFPOpticsModuleInfoVendorOUI This object indicates the Vendor OUI. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.27 |
| hwEponOltXFPOpticsModuleInfoVendorPN This object indicates the Vendor PN. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.28 |
| hwEponOltXFPOpticsModuleInfoVendorRev This object indicates the Vendor rev. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.29 |
| hwEponOltXFPOpticsModuleInfoExtTXRefClock This object indicates the txref clock.
Options:
1. nonExtTXRefClock(0) - TX Ref Clock Input Not Required
2. extTXRefClock(1) - TX Ref Clock Input Requ… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.3 |
| hwEponOltXFPOpticsModuleInfoF51 This object indicates the Wavelength. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.30 |
| hwEponOltXFPOpticsModuleInfoWaveTolerance This object indicates the WaveTolerance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.31 |
| hwEponOltXFPOpticsModuleInfoMaxCaseTemperature This object indicates the Maximum Case Temperature in Degrees C. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.32 |
| hwEponOltXFPOpticsModuleInfoCcbase This object indicates the Cc_base. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.33 |
| hwEponOltXFPOpticsModuleInfoMaxDissipation This object indicates the Maximum Power Dissipation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.34 |
| hwEponOltXFPOpticsModuleInfoMaxDissipationPowerDownMode This object indicates the Maximum Total Power Dissipation in Power Down Mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.35 |
| hwEponOltXFPOpticsModuleInfoMaximum5P0VSupply This object indicates the Maximum current required by +5V Supply. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.36 |
| hwEponOltXFPOpticsModuleInfoMaximum3P3VSupply This object indicates the Maximum current required by +3.3V Supply. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.37 |
| hwEponOltXFPOpticsModuleInfoMaximum1P8VSupply This object indicates the Maximum current required by +1.8V Supply. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.38 |
| hwEponOltXFPOpticsModuleInfoMaximum5P2VSupply This object indicates the Maximum current required by -5.2V Supply. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.39 |
| hwEponOltXFPOpticsModuleInfoExtCDRFunc This object indicates the CDR function.
Options:
1. nonExtCDRFunc(0) - Non-CDR version of XFP
2. extCDRFunc(1) - Module with CDR function
3. invali… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.4 |
| hwEponOltXFPOpticsModuleInfoVendorSN This object indicates the Vendor SN. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.40 |
| hwEponOltXFPOpticsModuleInfoDateCode This object indicates the Date code. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.41 |
| hwEponOltXFPOpticsModuleInfoDiagnoMonitorPowerMeasure This object indicates the Received power measurement type.
Options:
1. supportOMA(0) - OMA
2. supportAveragePower(1) - Average Power
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.42 |
| hwEponOltXFPOpticsModuleInfoDiagnoMonitorTypeFECBER This object indicates the Module Respond to FEC BER.
Options:
1. nonSupportBER(0) - No BER Support
2. supportBER(1) - BER Support
3. invalid(-1) - In… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.43 |
| hwEponOltXFPOpticsModuleInfoEnhancedOptions Indicates which optional enhanced features are implemented.
bit Description of Enhanced Options
7 Module Supports Optional VPS
6 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.44 |
| hwEponOltXFPOpticsModuleInfoAuxInputOne This object indicates the optics Aux Input One.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. au… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.45 |
| hwEponOltXFPOpticsModuleInfoAuxInputTwo This object indicates the optics Aux Input two.
Options:
1. auxInputType1(0) - Auxiliary monitoring not implemented
2. auxInputType2(1) - APD Bias Voltage
3. au… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.46 |
| hwEponOltXFPOpticsModuleInfoCCEXT This object indicates the CC_EXT . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.47 |
| hwEponOltXFPOpticsModuleInfoWavelengthFor2d5G This object indicates the Wavelength for 2.5G. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.48 |
| hwEponOltXFPOpticsModuleInfoWavelengthFor1d25G This object indicates the Wavelength for 1.25G. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.49 |
| hwEponOltXFPOpticsModuleInfoExtPowerLevel This object indicates the power level.
Options:
1. extPowerLevel1(0) - Power Level 1 Module (1.5 W max. power dissipation.)
2. extPowerLevel2(1) - Power Level … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.5 |
| hwEponOltXFPOpticsModuleInfoVendorSpecific This object indicates the Vendor specific. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.50 |
| hwEponOltXFPOpticsModuleXponType This object indicates the module type.
Options:
1. unknown(1) - Unknown
2. gpon(2) - GPON
3. epon(3) - EPON
4. epon10g(4) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.51 |
| hwEponOltXFPOpticsModuleXponSubType This object indicates the sub module type.
Options:
1. unknown(1) - Unknown
2. classbplus(101) - CLASS B+
3. classcplus(102) - CLASS C+
4. … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.52 |
| hwEponOltXFPOpticsModuleXponUsedType This object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. olt(2) - OLT
3. ont(3) - ONT
4. onu(4) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.53 |
| hwEponOltXFPOpticsModuleXponEncapsulationType This object indicates the encapsulation information about the optical transceiver.
Options:
1. unknown(1) - Unknown
2. sff2x5(2) - SFF 2x5
3. sff2x10(3) - SF… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.54 |
| hwEponOltXFPOpticsModuleXponTemperatureLevel This object indicates the application scenario of the optical transceiver.
Options:
1. unknown(1) - Unknown
2. commercial(2) - commercial
3. industry(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.55 |
| hwEponOltXFPOpticsModuleXponOPMprecision This object indicates the OPM precision.
Options:
1. unknown(1) - Unknown
2. db3(2) - 3db
3. db1(3) - 1db
4. invalid(-1) - Indicates that the qu… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.56 |
| hwEponOltXFPOpticsModuleInfoConnector This object indicates the code for connector type.
Options:
1. unknown(1) - Unknown
2. sc(2) - SC
3. copperConnector1(3) - Fibre Channel Styl… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.6 |
| hwEponOltXFPOpticsModuleInfoEncodingRZ This object indicates the EncodingRZ.
Options:
1. nonEncodingRZ(0) - Encoding Don't Support RZ
2. encodingRZ(1) - Encoding Support RZ
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.7 |
| hwEponOltXFPOpticsModuleInfoEncodingNRZ This object indicates the EncodingNRZ.
Options:
1. nonEncodingNRZ(0) - Encoding Don't Support NRZ
2. encodingNRZ(1) - Encoding Support NRZ
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.8 |
| hwEponOltXFPOpticsModuleInfoEncoding8B10B This object indicates the Encoding8B10B.
Options:
1. nonEncoding8B10B(0) - Encoding Don't Support 8B10B
2. encoding8B10B(1) - Encoding Support 8B10B
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.24.1.9 |