hwEponDeviceOntMatchStatus
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.2.57.1.18
Object
column
Enumeration
This object indicates the ONT match status. Options: 1. initialization(1) - Indicates that the ONT is initialization 2. match(2) - Indicates that the ONT is matched 3. mismatch(3) - Indicates that the ONT is mismatched 4. invalid(-1) - Indicates that the query fails or no information is detected
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.2.57.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwEponDeviceOntControlInfoEntry
- Table
- hwEponDeviceOntControlInfoTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | invalid |
1 | initialization |
2 | match |
3 | mismatch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEponDeviceOntActive This object is used to activate or deactivate an ONT.
Options:
1. activate(1) - Activates an ONT
2. deactivate(2) - Deactivates an ONT
3. invalid (-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.1 |
| hwEponDeviceOntRunStatus This object indicates the ONT running status.
Options:
1. up(1) - Normal
2. down(2) - Fault
3. invalid(-1) - Indicates th… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.15 |
| hwEponDeviceOntConfigStatus This is the ONT configuration resume status. If it is failed(3),
the ONT is down and the service is interrupted.
If the config status is noresume (4), set the resume policy as
res… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.16 |
| hwEponDeviceOntDiscoveryState This object indicates the ONT discovery state.
Options:
1. on(1) - Indicates that the ONT discovery state is on
2. off(2) - Indicates that the ONT disco… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.17 |
| hwEponDeviceOntDistance This object indicates the result of the ONT ranging. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.19 |
| hwEponDeviceOntReset This object is used to reset an ONT.
Options:
1. reset(1) - Reset an ONT
2. invalid(-1) - Indicates that the query fails or no information is detected | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.2 |
| hwEponDeviceOntRtt This object indicates the result of the ONT ranging(RTT). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.20 |
| hwEponDeviceOntUpStreamBW This object indicates the upstream bandwidth of the ONT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.21 |
| hwEponDeviceOntDownStreamBW This object indicates the downstream bandwidth of the ONT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.22 |
| hwEponDeviceOntLastUpTime This object indicates the time when the ONT last goes online. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.23 |
| hwEponDeviceOntLastDownTime This object indicates the time when the ONT last goes offline. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.24 |
| hwEponDeviceOntLastDownCause This object indicates the reason why the ONT last went offline.
The value (1) indicates that the reason is LOS(Loss of signal),
The value (2) indicates that the reason is LOSI(Los… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.25 |
| hwEponDeviceOntLastDyingGaspTime This object indicates the time when the ONT last goes down due to Dying Gasp. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.26 |
| hwEponDeviceOntIsolationStatus This object indicates the ONT isolation status.
Options:
1. normal(0) - Indicates that the ONT is normal
2. isolated(1) - Indicates that the ONT is isolated | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.27 |
| hwEponDeviceOntActualNniType This object indicates the ONT actual rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream rate 1… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.28 |
| hwEponDeviceOntLastActualNniType This object indicates the ONT last actual rate type.
Options:
1. rate1G1G(1) - Downstream rate 1Gbps, upstream rate 1Gbps
2. rate10G1G(2) - Downstream r… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.29 |
| hwEponDeviceOntReRegister This object is used to re-register an ONT.
Options:
1. reRegister(1) - Re-register an ONT
2. invalid(-1) - Indicates that the query fails or no information is detected | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.3 |
| hwEponDeviceOntLastDistance This object indicates the result of the ONT last ranging. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.30 |
| hwEponDeviceOntReDiscovery This object is used to reset the discovery status of an ONT.
If the authentication mode is once-on(4), after performing the rediscovery operation,
the registered working period is… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.4 |
| hwEponDeviceOntPing This object indicates the ONT ping. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.57.1.5 |