hwEponDeviceOltControlStatus
HUAWEI-XPON-MIB ·
.1.3.6.1.4.1.2011.6.128.1.1.2.31.1.5
Object
column
Enumeration
This object indicates the EPON port status in the OLT: Options: 1. up(1) - Indicates that the EPON port is normal 2. down(2) - Indicates that the EPON port is fault
Context
- MIB
- HUAWEI-XPON-MIB
- OID
.1.3.6.1.4.1.2011.6.128.1.1.2.31.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwEponDeviceOltControlInfoEntry
- Table
- hwEponDeviceOltControlInfoTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEponDeviceOltControlfarthest This object indicates the fiber distance between the OLT and the farthest ONT
EPON: 0-40 km
10 Gb/s EPON: 0-60 km | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.1 |
| hwEponDeviceOltEffectiveFlag This object is the flag indicating whether the buffer function takes effect immediately. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.10 |
| hwEponOltLowTimeLapseStatus This object indicates the status of the EPON low time switch. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.11 |
| hwEponDeviceOltControlOntNum This object indictates the number of ONTs that are added to the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.12 |
| hwEponDeviceOltControlVlanTagMode This object indicates the configuration function of the VLAN tag mode of the PON port.
Options:
1. tagbasedont(1) - Tag-based-ont
2. tagbasedvlan(2) - Tag-based-vlan
3. inval… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.13 |
| hwEponDeviceOltLastUpTime This object indicates the time when the port last goes online. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.14 |
| hwEponDeviceOltLastDownTime This object indicates the time when the port last goes offline. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.15 |
| hwEponDeviceOltLastDownCause This object indicates the reason why the port last goes offline.
Options:
1. los(1) - Loss of signal
2. opticModuleAbsence(2) - The optic module is absence
3. optic… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.16 |
| hwEponDeviceOltControlLeftBandWidth This object indicates the untapped bandwidth of 1G upstream ONT's port, unit Kbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.17 |
| hwEponDeviceOltControlAvailableBandWidth This object indicates the available bandwidth of 1G upstream ONT's port, unit Kbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.18 |
| hwEponDeviceOltControlManualDetectRogueOnt This object indicates the switch of the rogue ONT manual detection.
Options:
1. startup(1) - Starts up the switch of the rogue ONT manual detection
2. invalid(-1) - Indicates… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.19 |
| hwEponDeviceOltControlAutofindOntEnable This object indicates the ONT auto find switch.
Options:
1. enable(1) - Enable the ONT auto find switch
2. disable(2) - Disable the ONT auto find switch
3. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.2 |
| hwEponDeviceOltRogueOntExist This object is used to query whether there are Illegal incursionary rogue ONTs under port.
Options:
1. inexistent(0) - Indicates that there are not Illegal incursionary rogue O… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.20 |
| hwEponDeviceOltLeftBandWidth10GUpstream This object indicates the untapped bandwidth of 10G upstream ONT's port, unit Kbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.21 |
| hwEponDeviceOltAvailableBandWidth10GUpstream This object indicates the available bandwidth of 10G upstream ONT's port, unit Kbps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.22 |
| hwEponDeviceOltControlAlarmProfileName This object indicates the name of the alarm profile that is bound to the EPON port. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.23 |
| hwEponDeviceOltControlWarningProfileName This object indicates the name of the warning profile that is bound to the EPON port. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.24 |
| hwEponDeviceOltControlEnergySavingFlag Energy saving state of the EPON port.
Options:
1. yes (1) - The EPON port is in energy saving state
2. no (2) - The EPON port is not in energy saving state | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.25 |
| hwEponDeviceOltControlManualCheckRogueOnt This object indicates the switch of the rogue ONT manual check.
Options:
1. startup(1) - Start up the switch of the rogue ONT manual checked
2. invalid(-1) - Indicates that t… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.26 |
| hwEponDeviceOltControlPortReset This parameter is used to reset the port.
Options:
1. reset(1) - Indicates that the port resets
2. invalid(-1) - Indicates that the query fails or no information is checked | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.27 |
| hwEponDeviceOltControlDespt This object indicates the description of the EPON port. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.3 |
| hwEponDeviceOltControlLaserSwitch This object indicates the laser switch of the EPON port.
Options:
1. on(1) - Open the laser switch of the EPON port
2. off(2) - Close the laser switch of the EPON p… | column | Enumeration | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.4 |
| hwEponDeviceOltControlUpStreamBandWidth This object indicates the up-stream bandwidth of EPON port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.6 |
| hwEponDeviceOltControlDownStreamBandWidth This object indicates the down-stream bandwidth of EPON port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.7 |
| hwEponDeviceOltControlOpticAlarmProfileName This object indicates the short delay switch status that is saved in the database of the OLT. | column | OctetString | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.8 |
| hwEponDeviceOltLowTimeLapseSwitch This object is used to query the short delay switch status that is saved in the database of the OLT. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.128.1.1.2.31.1.9 |