hwXdslAttndrMethod

This parameter specifies the method to be used for the calculation of the ATTNDR 
in the downstream and upstream direction. The parameter can take three values 0, 1 and 2.
Default values: attndrMethod1. 
Options: 
1. attndrMethod0(0)       - The basic Attainable Net Data Rate method
2. attndrMethod1(1)       - The improved Attainable Net Data Rate method, If the control 
                            parameter attndr_method is set to a value of 1, the VTU-O and 
                            VTU-R shall use the impulse noise protection limit INP_min0 with 
                            value as indicated in O-TPS. If O-TPS configures for dual bearer 
                            channel mode, then the highest INP_MINn over the bearer channels 
                            shall be used 1
3. attndrMethod2(2)       - The improved Attainable Net Data Rate method, If the control parameter 
                            attndr_method is set to a value of 2, the VTU-O and VTU-R shall use an 
                            impulse noise protection limit INP_MIN0 = 0
                                      
Note:  When hwXdslAttndrStandardMethod set to no, the VTU-O will use a vendor discretionary algorithm 
       to optimize the ATTNDR.

MIB

HUAWEI-XDSL-COMMON-MIB

OID

.1.3.6.1.4.1.2011.6.148.1.4.1

Type

scalar

Access

readwrite

Status

current

Parent

hwXdslAttndrConfig