prialarmFallingThreshold

Object

column r/w Integer32

A threshold for the sampled statistic.  When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generated.
A single event will also be generated if the first
sample after this entry becomes valid is less than or
equal to this threshold and the associated
alarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingAlarm(3).
              
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
alarmRisingThreshold.
              
This object may not be modified if the associated
alarmStatus object is equal to valid(1).

Context

MIB: HUAWEI-RMON-EXT-MIB
OID: .1.3.6.1.4.1.2011.1.3.4.4.1.1.9
Type: column
Access: readwrite
Status: current
Parent: prialarmEntry
Table: prialarmTable
Siblings: 14

Related Objects

Sibling Objects

Object	Type	Syntax	OID
prialarmIndex An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.1`
prialarmRisingEventIndex The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same v…	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.10`
prialarmFallingEventIndex The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same …	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.11`
prialarmStatCycle	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.12`
prialarmStatType	column	Enumeration	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.13`
prialarmOwner The entity that configured this entry and is therefore using the resources assigned to it.	column	IF-MIBOwnerString	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.14`
prialarmStatus The status of this alarm entry.	column	RMON-MIBEntryStatus	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.15`
prialarmInterval The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaV…	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.2`
prialarmVariable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge…	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.3`
prialarmSympol	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.4`
prialarmSampleType The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the se…	column	Enumeration	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.5`
prialarmValue The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning …	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.6`
prialarmStartupAlarm The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStar…	column	Enumeration	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.7`
prialarmRisingThreshold A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this t…	column	Integer32	`.1.3.6.1.4.1.2011.1.3.4.4.1.1.8`

Object

Context

Syntax

Values & Constraints

Related Objects