hwNTPPeerDelay
HUAWEI-NTP-MIB ·
.1.3.6.1.4.1.2011.5.25.22.2.1.1.1.24
Object
column
OctetString
This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew-error accumulation.
Context
- MIB
- HUAWEI-NTP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.22.2.1.1.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwNTPPeerEntry
- Table
- hwNTPPeerTable
- Siblings
- 35
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwNTPPeerConfig This is a bit indicating that the association was created
from configuration information and should not be demobilized
if the peer becomes unreachable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.1 |
| hwNTPPeerStratum This is a integer indicating the stratum level
of the peer clock, with values defined as follows:
0, unspecified
1, primary reference (e.g.,, radio clock)
2-255, secondary referen… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.10 |
| hwNTPPeerPPoll The interval at which the peer polls the local host. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.11 |
| hwNTPPeerHPoll The interval at which the local host polls the peer. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.12 |
| hwNTPPeerPrecision This is a signed integer indicating the precision of
the peer clock, in seconds to the nearest power of two.
The value must be rounded to the next larger power of
two; for instanc… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.13 |
| hwNTPPeerRootDelay This is a signed fixed-point number indicating
the total roundtrip delay to the primary reference source
at the root of the synchronization subnet, in milliseconds.
Note that this… | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.14 |
| hwNTPPeerRootDispersion This is a signed fixed-point number indicating
the maximum error of the peer clock relative to
the primary reference source at the root of the
synchronization subnet, in milliseco… | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.15 |
| hwNTPPeerRefId The reference identifier of the peer.
This is a 32-bit code identifying the particular reference clock.
In the case of stratum 0 (unspecified) or stratum 1 (primary
reference sour… | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.16 |
| hwNTPPeerRefTime This is the local time at the peer, in timestamp format,
when the local clock was last updated. If the local clock has
never been synchronized, the value is zero. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.17 |
| hwNTPPeerOrg This is the local time, in timestamp format,
at the peer when it's latest NTP message was sent.
If the peer becomes unreachable the value is set to zero | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.18 |
| hwNTPPeerRec This is the local time, in timestamp format,
when the latest NTP message from the peer arrived.
If the peer becomes unreachable the value is set to zero. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.19 |
| hwNTPPeerAuthenable This is a bit indicating that system support authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.2 |
| hwNTPPeerXmt This is the local time, in timestamp format,
at which the NTP message departed the sender. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.20 |
| hwNTPPeerReach This is a shift register of NTP.WINDOW bits used to
determine the reach ability status of the peer,
with bits entering from the least significant (rightmost) end.
A peer is consid… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.21 |
| hwNTPPeerValid This is an integer counter indicating the valid samples
remaining in the filter register. It is used to
determine the reach ability state and when the
poll interval should be inc… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.22 |
| hwNTPPeerTimer This is an integer counter used to control the
interval of transmitted NTP messages from the local host to the peer. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.23 |
| hwNTPPeerOffset This is a signed, fixed-point number indicating the offset
of the peer clock relative to the local clock, in milliseconds. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.25 |
| hwNTPPeerJitter This is an indicating that peer of sample Variance | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.26 |
| hwNTPPeerDispersion This is a signed fixed-point number indicating the
maximum error of the peer clock relative to the local
clock over the network path between them, in milliseconds.
Only positive v… | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.27 |
| hwNTPPeerKeyId This is an unsigned integer identifying the cryptographic
key used to generate the message-authentication code. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.28 |
| hwNTPPeerFiltDelay Round-trip delay of the peer clock relative to the
local clock over the network path between them, in
milliseconds. This variable can take on both positive
and negative values, d… | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.29 |
| hwNTPPeerAuthentic This is a bit indicating that message pass authentication which is authentic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.3 |
| hwNTPPeerFiltOffset The offset of the peer clock relative to the local clock in milliseconds. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.30 |
| hwNTPPeerFiltError The maximum error of the peer clock relative to the
local clock over the network path between them, in
milliseconds. Only positive values greater than zero
are possible. | column | OctetString | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.31 |
| hwNTPPeerPMode This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic message… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.32 |
| hwNTPPeerReceived The number of received messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.33 |
| hwNTPPeerSent The number of send messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.34 |
| hwNTPPeerFlash The information about the message. | column | Bits | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.35 |
| hwNTPPeerRowStatus The status object for this row. When a management
station is creating a new row, it should set the
value for cntpPeersPeerAddress at least, before the
row can be made 'active'. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.36 |
| hwNTPPeerRemAdr The IP address of the peer. When creating a new
association, a value for this object should be set
before the row is made active. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.4 |
| hwNTPPeerRemPort The UDP port number on which the peer receives NTP messages. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.5 |
| hwNTPPeerLocAdr The IP address of the local host. Multi-homing can
be supported using this object. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.6 |
| hwNTPPeerLocPort The UDP port number on which the local host receives NTP messages. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.7 |
| hwNTPPeerLeap This is a two-bit code warning of an impending leap
second to be inserted in the NTP timescale. The bits
are set before 23:59 on the day of insertion and reset
after 00:00 on the… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.8 |
| hwNTPPeerHMode This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic message… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.22.2.1.1.1.9 |